If you found this page, you probably have a problem and you need a user manual for the device Agilent Technologies Agilent Oscilloscopes, Agilent Mixed-Signal Oscilloscopes 22A. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Agilent Technologies Agilent Oscilloscopes, Agilent Mixed-Signal Oscilloscopes 22A it belongs to the category Sprinkler. A user manualAgilent Technologies Agilent Oscilloscopes, Agilent Mixed-Signal Oscilloscopes 22A is taken from the manufacturer, a Agilent Technologies company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Agilent Technologies Agilent Oscilloscopes, Agilent Mixed-Signal Oscilloscopes 22A directly. You can view the user manualAgilent Technologies Agilent Oscilloscopes, Agilent Mixed-Signal Oscilloscopes 22A directly online or save and store it on your computer.

Getting Started  

When you use the oscilloscopes to help test and troubleshoot your  

systems, you may do the following:  

•

•

•

•

•

•

•

Prepare the oscilloscope by connecting it to power and setting up the  

handle and screen intensity as desired.  

Define the measurement problem by understanding the parameters  

of the system you wish to test, and the expected system behavior.  

Set up channel inputs by connecting the probes to the appropriate  

signal and ground nodes in the circuit under test.  

Define the trigger to reference the waveform data at a specific event  

of interest.  

Use the oscilloscope to acquire data, either in continuous or single-  

shot fashion.  

Examine the data and make measurements on it using various  

features.  

Save the measurement or configuration for later re-use or comparison  

with other measurements.  

Repeat the process as necessary until you verify correct operation or  

find the source of the problem.  

MegaZoom Technology Operates with Untriggered Data  

With the MegaZoom technology built into the oscilloscope, you can  

operate the oscilloscope with untriggered data. All you do is press Run  

or Single while in Auto trigger mode, then examine the data to set up a  

trigger.  

1-2  

• ← Previous
• Next page →

In addition to the user manual Agilent Technologies Agilent Oscilloscopes, Agilent Mixed-Signal Oscilloscopes 22A, we also provide a support panel to help you solve your problems with Agilent Technologies Agilent Oscilloscopes, Agilent Mixed-Signal Oscilloscopes 22A. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Agilent Technologies Agilent Oscilloscopes, Agilent Mixed-Signal Oscilloscopes 22A. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Agilent Technologies Agilent Oscilloscopes, Agilent Mixed-Signal Oscilloscopes 22A - you will surely help many users by doing so.