User manual Extron electronic WM EC F

If you found this page, you probably have a problem and you need a user manual for the device Extron electronic WM EC F. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Extron electronic WM EC F it belongs to the category Stereo Amplifier. A user manualExtron electronic WM EC F is taken from the manufacturer, a Extron electronic company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Extron electronic WM EC F directly. You can view the user manualExtron electronic WM EC F directly online or save and store it on your computer.

Controls and Installation, cont’d  
3.  
Mount the distribution amplifier to the wall box with  
machine screws, as shown in the following illustration.  
Wall Stud  
Wall Stud  
Installation Cable  
Cable Clamp  
Installation Cable  
Cable Clamp  
Wall Box  
Screwsor Nails  
Screwsor Nails  
Extron  
P2 DA2 D  
AUDIO IN  
Wall opening  
isflush with  
edge of box.  
COMPUTER IN  
OR OUT  
MONIT  
Attaching the wall box to a wall stud  
If attaching the wall box to wood, use four #8 or #10 screws or  
1
threads must penetrate the wood.  
0-penny nails. A minimum of 1/2 inch (1.3 cm) of screw  
If attaching the wall box to metal studs, use four #8 or #10 self-  
tapping sheet metal screws or machine bolts with matching  
nuts.  
Decora  
Faceplate  
Mounting the distribution amplifier  
Mountingthedistributionamplifiertothewallbox  
Before mounting the distribution amplifier and if it has not  
already been tested, test the system to make sure that the  
connections and settings are correct.  
4
.
.
Attach the Decora cover plate to the line driver, as shown  
in the previous illustration.  
5
Reconnect the power supply and restore power to the  
equipment.  
If the system is operating correctly, the distribution amplifier  
can be installed in the wall. Adjust the gain and set the DIP  
switches before fastening the distribution amplifier into the wall  
box. The controls and cables will be inaccessible after  
installation. See “Rear Panel Features and Operation” in this  
chapter for details about settings and adjustments.  
Continue mounting the distribution amplifier by following the  
steps below.  
1.  
Remove power from the distribution amplifier by  
disconnecting the power supply.  
2.  
Place the distribution amplifier through the opening in the  
wall and into the wall box. Take care not to damage the  
output cable(s), which fit behind the distribution amplifier  
at the back of the wall box.  
2
-18  
P/2 DA2 WM/EC/D/AAP Series • Controls and Installation  
P/2 DA2 WM/EC/D/AAP Series • Controls and Installation  
2-19  

In addition to the user manual Extron electronic WM EC F, we also provide a support panel to help you solve your problems with Extron electronic WM EC F. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Extron electronic WM EC F. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Extron electronic WM EC F - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.