User manual Mark Levinson Mono Power Amplifier N436

If you found this page, you probably have a problem and you need a user manual for the device Mark Levinson Mono Power Amplifier N436. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Mark Levinson Mono Power Amplifier N436 it belongs to the category Stereo Amplifier. A user manualMark Levinson Mono Power Amplifier N436 is taken from the manufacturer, a Mark Levinson company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Mark Levinson Mono Power Amplifier N436 directly. You can view the user manualMark Levinson Mono Power Amplifier N436 directly online or save and store it on your computer.

Nº436  
Nº436/434 Mono Power Amplifiers  
Rated power output:  
Nº436  
3
50W/ch continuous rms power @ 8Ω  
7
00W/ch continuous rms power @ 4Ω  
Nº434  
1
25W/ch continuous rms power @ 8Ω  
250W/ch continuous rms power @ 4Ω  
all above power ratings measured as continuous (rms) power from 20Hz–20kHz with no more than  
0.5% THD (assuming that the AC mains can deliver adequate current, without its own voltage sagging)  
Frequency response:  
Signal-to-noise ratio  
within 0.3dB from 20Hz to 20kHz  
(main outputs):  
better than –80dB (ref. 1W, 8)  
26.8dB  
Voltage gain:  
Input impedance:  
100k(balanced)  
5
0k(single-ended)  
Input sensitivity:  
Nº436  
2.42V for full rated output  
Nº434  
1.44V for full rated output  
Output impedance:  
Power consumption:  
less than 0.05from 20Hz to 20kHz  
Nº436  
typically 525 watts (±5%) on  
typically 100 watts (±5%) in standby  
Nº434  
typically 275 watts (±5%) on  
typically 100 watts (±5%) in standby  
Mains voltage:  
100V, 120V, 200V, 220V, or 240V at either 50 or 60Hz, factory set for destination country  
Connector complement:  
(1) pair custom binding posts  
(
(
(
(
(
(
(
(
1) balanced input on XLR  
1) single-ended input on Madrigal RCA  
1) 3.5mm trigger out jack  
1) 3.5mm trigger in jack  
1) RJ-45 communications port (Mark Levinson Linking )  
1) RJ-11 communications port (Mark Levinson Linking )  
1) RS-232 communications port on RJ-11  
1) IEC-standard AC receptacle  
Overall dimensions:  
Nº436  
width: 17.75" (45.1cm)  
height: 7.65" (19.4cm)  
depth: 20.21" (51.3cm)  
Nº434  
width: 17.75" (45.1cm)  
height: 5.91" (15.0cm)  
depth: 20.21" (51.3cm)  
Shipping weight:  
Nº436 95lb  
(43.7kg) each  
Nº434 65lb  
(29.9kg) each  
Specifications are subject to change without notice.  
Specifications are subject to change without notice.  
®
Mark Levinson is a registered trademark of  
Harman International Industries, Incorporated.  
3
O a k P a r k , B e d f o r d , M A 0 1 7 3 0 - 1 4 1 3 U S A  
Te l : 7 8 1 - 2 8 0 - 0 3 0 0 F a x : 7 8 1 - 2 8 0 - 0 4 9 0  
w w w . m a r k l e v i n s o n . c o m  
|
Not responsible for typographic errors.  
Part # 072-16385  

In addition to the user manual Mark Levinson Mono Power Amplifier N436, we also provide a support panel to help you solve your problems with Mark Levinson Mono Power Amplifier N436. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Mark Levinson Mono Power Amplifier N436. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Mark Levinson Mono Power Amplifier N436 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.