If you found this page, you probably have a problem and you need a user manual for the device Audiovox TERK SIR4. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Audiovox TERK SIR4 it belongs to the category Stereo System. A user manualAudiovox TERK SIR4 is taken from the manufacturer, a Audiovox company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Audiovox TERK SIR4 directly. You can view the user manualAudiovox TERK SIR4 directly online or save and store it on your computer.

SIR4-Truck Satellite Radio Antenna  

Mirror Mount Installation  

NOTE: The mounts supplied may not fit on all model year and make truck mirrors. If your rig does  

not have the chrome pipe type mirror bars you will need to use the Air Dam Shield mounting  

method or flat surface mounting method.  

1. Insert the Antenna Assembly into the Mirror Mount Clamp hole. See Figure 2 on page 5.  

2. On the bottom side of the Mirror Mount Clamp A place the 3/4” Ext. Tooth Lock Washer on the  

Antenna Assembly Shaft.  

3. Now place the 3/4”-16 Hex Nut onto the shaft securing the nut with a 3/4” Open-End Wrench.  

4. Using a torque wrench tighten to 10.5ft-lbs. (126 in-lbs.) using the appropriate torque wrench  

adapter (1-1/8”).  

5. Select the highest location on the truck mirror to mount the satellite radio antenna without  

obstruction.  

6. Take the four M6XP1.0 Hex Screws and insert them through the four holes in Mirror Clamp A.  

7. Take Mirror Mount Clamp B and insert them onto the four M6XP1.0 Hex Screws and Mirror  

Mount Clamp A.  

8

. Now place the four M6 Lock Washers onto the M6XP1.0 Hex Screws.  

. Now place the four M6 Washers onto the M6XP1.0 Hex Screws.  

9

1

0. Now use the M6XP1.0 Hex Nuts and hand tighten all four onto the M6XP1.0 Hex Screws.  

1. Using the torque wrench torque the M6XP1.0 Hex Nuts to 15 in-lbs.  

1

Figure 4. Mirror Mount Cable Routing  

Figure 5. Mirror Mount Cable Routing  

7

• ← Previous
• Next page →

In addition to the user manual Audiovox TERK SIR4, we also provide a support panel to help you solve your problems with Audiovox TERK SIR4. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Audiovox TERK SIR4. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Audiovox TERK SIR4 - you will surely help many users by doing so.