If you found this page, you probably have a problem and you need a user manual for the device Philips CDR 950. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Philips CDR 950 it belongs to the category Stereo System. A user manualPhilips CDR 950 is taken from the manufacturer, a Philips company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Philips CDR 950 directly. You can view the user manualPhilips CDR 950 directly online or save and store it on your computer.

INSTALLATION  

Connections general  

Analog connections  

For recording the following inputs are present:  

Analog connection is required for playback of CDs (use cable  

2) and for recording from external analog sources  

(use cable 1).  

-

-

-

-

Digital optical input.  

Digital coaxial input 1.  

Digital coaxial input 2.  

Analog input.  

RECEIVER  

For playback the following outputs are present:  

-

-

-

Digital coaxial output.  

Digital optical output.  

Analog output.  

L

L

R

R

IN  

OUT  

TAPE  

We advise you to connect these to the CD input on your  

amplifier.  

CD RECORDER  

1

2

ANALOG  

IN  

OUT  

The connections you make will depend upon the possibilities  

your audio equipment offers. Please refer to the user manuals  

for your other audio equipment first.  

L

L

DIGITAL  

OUT  

IN1  

R

IN2  

OPTICAL  

IN  

OUT  

R

Digital recordings (optical or coaxial) give the best  

performance in audio and usability (e.g. auto-track).  

(

disturbances).  

The digital optical connection is less sensitive to external  

Use the audio cables supplied. Connect the red plugs to the  

R sockets, and the white plugs to the L sockets.  

If your equipment does not offer digital connections, the high  

quality Analog-Digital-Convertor of your CD recorder will  

ensure very good audio performance when recordings are  

made from the analog input.  

1 For recording, connect cable 1between the ANALOG IN-  

sockets on the CD recorder and the CDR LINE- or TAPE OUT-  

sockets of an amplifier.  

Playback via the digital coaxial output of the CD recorder  

gives the best audio performance.  

If your equipment does not offer digital connections, the high  

quality Digital-Analog-Convertor of the CD recorder ensures a  

very good sound quality via the analog output.  

Note: For recording directly from a CD player, the ANALOG IN  

sockets of the CD recorder should be connected to the  

analog output of the CD player.  

2

For playback, connect cable 2between the ANALOG OUT-  

sockets on the CD recorder and the input sockets of an  

amplifier e.g. TAPE IN, CDR or AUX.  

We advise you to always establish both digital and analog  

connections. In this way you can always make analog  

recordings when digital recording is not possible.  

Note: Never use the PHONO input.  

We have described the most common ways of connecting the  

CD recorder. If you still have difficulties with the connections  

you can always contact the Philips Consumer Service desk in  

your country.  

1

1

• ← Previous
• Next page →

In addition to the user manual Philips CDR 950, we also provide a support panel to help you solve your problems with Philips CDR 950. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Philips CDR 950. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Philips CDR 950 - you will surely help many users by doing so.