User manual Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G

If you found this page, you probably have a problem and you need a user manual for the device Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G it belongs to the category Switch. A user manualCisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G is taken from the manufacturer, a Cisco Systems company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G directly. You can view the user manualCisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G directly online or save and store it on your computer.

Chapter 1 Product Overview  
Front Panel  
Figure 1-2  
Catalyst 3850-24P-L Switch Front Panel  
4
1
2
3
ACTV  
Catalyst 3850 PoE+  
C3850-NM-4-1G  
0
1X  
1
3X  
2
4X  
5
6
1
Mode button  
4
5
6
USB mini-Type B (console) port  
10/100/1000 PoE+ Ethernet ports  
Network module  
2
3
Status LEDs  
USB Type A storage port  
10/100/1000 Ethernet Ports  
The 10/100/1000 Ethernet ports use RJ-45 connectors with Ethernet pinouts. The maximum cable length  
is 328 feet (100 meters). The 100BASE-TX and 1000BASE-T traffic requires Category 5, Category 5e,  
or Category 6 unshielded twisted pair (UTP) cable. The 10BASE-T traffic can use Category 3 or  
Category 4 UTP cable.  
For information about the 10/100/1000 Ethernet port connections and specifications, see the  
10/100/1000 Ethernet Port Connections” section on page 2-19 and Appendix B, “Connector and Cable  
Specifications.”  
PoE, PoE+, and Cisco UPOE Ports  
The PoE+ and Cisco Universal Power Over Ethernet (Cisco UPOE) ports use the same connectors as  
described in the “10/100/1000 Ethernet Ports” section on page 1-5.  
They provide:  
PoE+ ports: Support for IEEE 802.3af-compliant powered devices (up to 15.4 W PoE per port) and  
support for IEEE 802.3at-compliant powered devices (up to 30 W PoE+ per port). The maximum  
total PoE power in a 1RU switch is 1800 W.  
Cisco UPOE ports: Support for powered devices on all four Ethernet signal pairs (up to 60 W Cisco  
UPOE per port).  
Support for Cisco-enhanced PoE.  
Support for prestandard Cisco powered devices.  
Configuration for StackPower. When the switch internal power supply module(s) cannot support the  
total load, StackPower configurations allow the switch to leverage power available from other  
switches.  
Configurable support for Cisco intelligent power management, including enhanced power  
negotiation, power reservation, and per-port power policing.  
Catalyst 3850 Switch Hardware Installation Guide  
OL-26779-02  
1-5  

In addition to the user manual Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G, we also provide a support panel to help you solve your problems with Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.