User manual Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G

If you found this page, you probably have a problem and you need a user manual for the device Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G it belongs to the category Switch. A user manualCisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G is taken from the manufacturer, a Cisco Systems company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G directly. You can view the user manualCisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G directly online or save and store it on your computer.

Chapter 1 Product Overview  
Front Panel  
Depending on the installed power supply modules, each port can deliver up to 60 W of Cisco UPOE. See  
Table 1-15 on page 1-19 for the power supply matrix that defines the available PoE, PoE+, and Cisco  
UPOE power per port. The output of the PoE+ circuit has been evaluated as a Limited Power Source  
(
LPS) per IEC 60950-1.  
Note  
For information about power supply modules, PoE+ port connections, and PoE+ specifications, see the  
Power Supply Modules” section on page 1-18, the “PoE+ and Cisco UPOE Port Connections” section  
on page 2-20, and Appendix B, “Connector and Cable Specifications.”  
Management Ports  
Ethernet management port (see the “Ethernet Management Port” section on page 1-23)  
RJ-45 console port (EIA/TIA-232) (see the “RJ-45 Console Port” section on page 1-23)  
USB mini-Type B console port (5-pin connector)  
You can connect the switch to a host such as a Windows workstation or a terminal server through the  
Ethernet management port, the RJ-45 console port, or the USB console port (USB mini-Type B port).  
The USB console port connection uses a USB Type A to 5-pin mini-Type B cable. The USB console  
interface speeds are the same as the RJ-45 console interface speeds.  
USB Mini-Type B Port  
The switch provides a USB mini-Type B console connection on the front panel, and the RJ-45 console  
port on the switch rear panel. Console output is always active on both connectors, but console input is  
active on only one connector at a time, with the USB connector taking precedence over the RJ-45  
connector.  
Use a USB type-A-to-USB 5-pin mini-Type B cable to connect a PC or other device to the switch. The  
required USB cable is included in the optional accessory kit.  
The connected device must include a terminal emulation application.  
Windows PCs need a driver for the USB port. See the “Installing the Cisco Microsoft Windows USB  
Device Driver” section on page C-4 for installation instructions.  
When the switch detects a valid USB connection to a powered device, input from the RJ-45 console port  
is immediately disabled, and input from the USB console is enabled. Removing the USB connection  
immediately reenables input from the Ethernet connection. An LED on the switch front panel (see  
Figure 1-4) is green when the USB console connection is enabled.  
The switch provides a configurable inactivity timeout that reactivates the RJ-45 console if no input  
activity has occurred on the USB console for a specified time period. After the USB console has been  
deactivated due to a timeout, you can restore its operation by disconnecting and reconnecting the USB  
cable. You can disable USB console operation by using Cisco IOS commands. See the switch software  
configuration guide for details.  
Note  
The 4-pin mini-Type B connectors resemble 5-pin mini-Type B connectors. They are not compatible.  
Use only the 5-pin mini-Type B. See Figure 1-3.  
Catalyst 3850 Switch Hardware Installation Guide  
1-6  
OL-26779-02  

In addition to the user manual Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G, we also provide a support panel to help you solve your problems with Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Cisco Systems Cisco C3850-Nm-4-1g Network Module C3850NM41G - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.