If you found this page, you probably have a problem and you need a user manual for the device D-Link Ethernet over VDSK 24-Port Switch DHS-3224V. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database D-Link Ethernet over VDSK 24-Port Switch DHS-3224V it belongs to the category Switch. A user manualD-Link Ethernet over VDSK 24-Port Switch DHS-3224V is taken from the manufacturer, a D-Link company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device D-Link Ethernet over VDSK 24-Port Switch DHS-3224V directly. You can view the user manualD-Link Ethernet over VDSK 24-Port Switch DHS-3224V directly online or save and store it on your computer.

D-Link DHS-3224V Switch User’s Guide  

2

Installation and Setup  

Please read this section carefully to be certain that all equipment is installed and set up in accordance with the  

instructions given here.  

Unpacking  

Each shipping carton should contain the following items:  

ꢀ

ꢀ

ꢀ

ꢀ

ꢀ

One DHS-3224V VDSL Switch  

Mounting kit: 2 mounting brackets and screws  

Four self-adhesive rubber feet  

One AC power cord  

This User’s Guide  

If any item is found missing or damaged, please contact your D-LINK representative or sales agent.  

Switch Placement  

The Switch and Splitter are designed for mounting in an EIA standard-sized, 19-inch rack, which can be placed  

in a wiring closet with other equipment. Make certain the location of the equipment rack is sufficiently dry and  

cool. See the Specifications in Appendix A for environmental requirements and limitations. Use these additional  

guidelines when selecting a suitable location for the equipment rack.  

ꢁ

Attach the rubber feet to all Switches and Splitters that will be installed to maintain a minimum space  

between the devices and to avoid damaging the equipment housing.  

ꢁ

ꢁ

ꢁ

ꢁ

If you are installing more than one Switch, read Connecting Multiple Switches in Chapter 4.  

The power outlet should be within 1.82 meters (6 feet) of the device.  

Visually inspect the power cord and see that it is secured to the AC power connector.  

Make sure that there is proper heat dissipation from and adequate ventilation around the Switch and  

Splitter. Leave at least 5cm of space on the right and left sides, as well as 5cm on the rear of the  

equipment for ventilation.  

ꢁ

ꢁ

Cables for both devices attach at the front and the rear. Make sure there is ample room at the front and  

the back of the devices to access cable connections.  

Do not place heavy objects on the Switch or Splitter.  

5

• ← Previous
• Next page →

In addition to the user manual D-Link Ethernet over VDSK 24-Port Switch DHS-3224V, we also provide a support panel to help you solve your problems with D-Link Ethernet over VDSK 24-Port Switch DHS-3224V. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with D-Link Ethernet over VDSK 24-Port Switch DHS-3224V. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with D-Link Ethernet over VDSK 24-Port Switch DHS-3224V - you will surely help many users by doing so.