User manual Juniper Networks ISG 2000

If you found this page, you probably have a problem and you need a user manual for the device Juniper Networks ISG 2000. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Juniper Networks ISG 2000 it belongs to the category Switch. A user manualJuniper Networks ISG 2000 is taken from the manufacturer, a Juniper Networks company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Juniper Networks ISG 2000 directly. You can view the user manualJuniper Networks ISG 2000 directly online or save and store it on your computer.

The Front Panel  
The LEDs in the dashboard are as follows:  
LED  
Purpose  
Color  
green  
off  
Meaning  
POWER  
Power Supply  
Power supply is functioning correctly.  
System is not receiving power.  
red  
There is a problem with the power.  
ALARM  
System Alarm  
blinking red  
• Continuous blinking indicates a self-test  
failure during the ScreenOS bootup. May  
also occur due to certain algorithm and ACL  
failures.  
Blinks once for each software attack.  
amber  
One of the following failures has occurred:  
Power supply is turned off.  
Hardware failure.  
Error with software module.  
off  
No alarm condition present.  
TEMP  
Temperature  
green  
orange  
Temperature is within safety range.  
Temperature is outside normal alarm range.  
>132°F or 56°C  
red  
Temperature is outside severe alarm range.  
>150°F or 66°C  
STATUS  
HA  
System Status  
blinking green  
amber  
The system is active.  
The system is booting.  
The system is off.  
Unit is master.  
off  
High Availability green  
Status  
amber  
Unit is a backup.  
red  
HA has been defined, but unit is not the  
backup system.  
off  
No HA activity defined.  
FAN  
Fan Status  
green  
red  
All fans functioning properly.  
One or more fans failed or fan subsystem is  
not receiving power.  
MOD1  
MOD2  
green  
off  
Security module is installed.  
No card installed.  
green  
off  
Security module is installed.  
No card installed.  
NetScreen-ISG 2000  
5

In addition to the user manual Juniper Networks ISG 2000, we also provide a support panel to help you solve your problems with Juniper Networks ISG 2000. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Juniper Networks ISG 2000. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Juniper Networks ISG 2000 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.