User manual Juniper Networks ISG 2000

If you found this page, you probably have a problem and you need a user manual for the device Juniper Networks ISG 2000. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Juniper Networks ISG 2000 it belongs to the category Switch. A user manualJuniper Networks ISG 2000 is taken from the manufacturer, a Juniper Networks company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Juniper Networks ISG 2000 directly. You can view the user manualJuniper Networks ISG 2000 directly online or save and store it on your computer.

The Front Panel  
High Availability Interfaces  
There are no dedicated High Availability (HA) interfaces on the NetScreen-ISG 2000;  
therefore, you must select and configure the HA ports once the system is running. The HA  
ports allow you to cable two devices together, and configure them to work as a redundant  
group. A redundant group consists of a master device and one backup device. If the master  
device fails, the backup device takes over as the new master, thus avoiding interruption of  
services. Any number and type of interfaces, from the four interface modules, can be used  
as an HA port.  
Note: It is recommended that you use mini-GBIC interface modules when possible. Do not  
mix mini-GBIC and 10/100 Mbps ports as HA ports. If you do not have a mini-GBIC  
interface module, you should use at least two 10/100 Mbps interfaces. For more  
information on HA configuration, see the NetScreen Concepts & Examples ScreenOS  
Reference Guide.  
For information on cabling for High Availability, see “Connecting the NetScreen-ISG 2000  
for High Availability” on page 26.  
The Fan Module  
The NetScreen-ISG 2000 has a three-fan module, which you can access on the left front  
side of the chassis.  
Fan Front  
Fan Module  
Fan Lever  
Warning: If a fan stops operating due to failure or removal, the system continues to run.  
Be sure that the fan tray is not empty for more than two minutes; otherwise, heat failure or  
permanent damage can occur.  
NetScreen-ISG 2000  
9

In addition to the user manual Juniper Networks ISG 2000, we also provide a support panel to help you solve your problems with Juniper Networks ISG 2000. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Juniper Networks ISG 2000. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Juniper Networks ISG 2000 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.