User manual IOGear MiniView Micro 4 GCS634U

If you found this page, you probably have a problem and you need a user manual for the device IOGear MiniView Micro 4 GCS634U. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database IOGear MiniView Micro 4 GCS634U it belongs to the category Switch. A user manualIOGear MiniView Micro 4 GCS634U is taken from the manufacturer, a IOGear company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device IOGear MiniView Micro 4 GCS634U directly. You can view the user manualIOGear MiniView Micro 4 GCS634U directly online or save and store it on your computer.

Operation  
Advanced Hotkeys  
You may enter advanced hotkey mode by pressing and holding [Num Lock] on the number pad, then  
pressing the [-] key on the number pad and immediately releasing both keys. On Apple keyboards the  
[
Clear] key on the number pad should be used in place of [Num Lock]. If you have done this correctly  
the Caps Lock and Scroll Lock lights on the keyboard should begin flashing. This means you are in  
hotkey mode, which will be shortened to just [HKM] below. If you are having trouble entering hotkey  
mode press [Esc] and try again.  
[
HKM] [T] – This will change the toggle key used to switch between computers. Each time you enter  
this command the toggle key will switch between the default of [Scroll Lock] and the alternate of  
Control].  
[
[
HKM] [H] – This will change the hotkey used to enter hotkey mode. Each time you enter this command  
the keys used to enter HKM will switch between the default of [Num Lock]+[-] and the alternate of  
Control]+[F12]. Please note that you must hold [Control] while pressing [F12] in exactly the same way  
you must hold [Num Lock] while pressing [-].  
[
[HKM] [A] [Enter] – This will put the switch into Auto Scan mode, disabling the keyboard and mouse  
but switching the display every 5 seconds to the next computer. This is a good way to monitor all your  
computers without continuously pressing hotkeys. Press [Esc] or [Space] to cancel Auto Scan mode.  
14  

In addition to the user manual IOGear MiniView Micro 4 GCS634U, we also provide a support panel to help you solve your problems with IOGear MiniView Micro 4 GCS634U. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with IOGear MiniView Micro 4 GCS634U. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with IOGear MiniView Micro 4 GCS634U - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.