Bedienungsanleitung Sony CFD-S300

Wenn Sie auf diese Seite gestoßen sind, dann haben Sie bestimmt ein Problem und benötigen eine Anleitung zum Gerät Sony CFD-S300. Denken Sie daran zu prüfen, ob es eine Anleitung zu genau diesem Gerät ist, was Sie suchen. In unserer Datenbank gehört Sony CFD-S300 zu der Kategorie MP3-Player. Die Anleitung Sony CFD-S300kommt vom Produzenten, der Firma Sony - es ist ein offizielles Dokument, und wenn Sie irgendwelche Zweifel haben, was den Inhalt betrifft, kontaktieren Sie bitte den Geräteproduzenten Sony CFD-S300 direkt. Sie können die Anleitung Sony CFD-S300 direkt online anschauen, oder es auf Ihrem Computer speichern und aufbewahren.

Location of controls  
Playing a CD  
Listening to the radio  
Playing a tape  
Connecting optional components  
(CFD-S300Lonly)  
You can record a CD on a MiniDisc and enjoy the sound from other components such as a  
portable MD, CD player, TV or VCR through the speakers of this player.  
Inserting  
a
cassette  
Loading  
a
CD  
Remote Control  
1
Press CD (direct power-on).  
1
2
Press RADIO BAND•AUTO PRESET until the band you want appears in the  
display (direct power-on).  
Each time you press the button, the indication changes as follows:  
CFD-S300: “FM” t“AM”  
1
2
Press TAPE (direct power-on).  
(On the remote, press OPERATE (or POWER) and then press FUNCTION  
(On the remote, press OPERATE (or POWER) and then press FUNCTION  
repeatedly until “TAPE” appears in the display.)  
With the side you want  
to play facing you  
reapeatedly until “Cd” appears in the display.)  
OPERATE  
Be sure to turn off the power of each component before making connections. For details, refer to  
the instructions of the component to be connected.  
(POWER)  
2
3
4
Load  
Press  
a
CD in the CD compartment.  
PUSH OPEN/CLOSE to close the CD compartment.  
Press xZ to open the tape compartment and insert a recorded tape. Close the  
compartment. Use TYPE  
CFD-S300L: “FM” t“MW” t“LW”  
Z
Hold down TUNE  
display.  
+
or  
until the frequency digits begin to change in the  
I
(normal) tape only.  
FUNCTION  
3
Press n.  
Press u.  
The player plays all the tracks once.  
Recording a CDon a MiniDisc recorder or DATrecorder  
To  
Press  
xZ  
The player automatically scans the radio frequencies and stops when it finds  
clear station.  
If you can't tune in a station, press the button repeatedly to change the frequency  
step by step.  
a
stop playback  
With the labeled side up  
*
To  
Press  
1
Connect the OPTICAL DIGITAL OUT (CD) jack of this player with the digital  
input jack of MiniDisc and DAT using the digital connecting cable* (not  
supplied).  
BAND  
fast-forward or rewind the tape  
pause playback  
m or M  
stop playback  
x
u*  
u
x
pause playback  
u
Press the button again to resume play after pause.  
XPress the button again to resume play after pause.  
.
TUNE –,  
,
>
+
.,>  
PRESET –,  
Tip  
If the FM broadcast is noisy, press MODE until “Mono” appears in the display and the radio will play in  
monaural.  
* Select a connecting cable depending on the type of the digital input jack of the recorder to be  
connected. For details, refer to the instruction manual of the component to be connected. The  
OPTICAL DIGITAL OUT (CD) jack of this player is square-shaped jack.  
LINE (CFD-S300L only)  
Z
PUSH  
RADIO BAND  
+
go to the next track  
go back to the previous track  
remove the CD  
>
.
eject the cassette  
xZ  
OPTICAL DIGITAL OUT (CD)  
x
OPEN/CLOSE AUTO PRESET  
(CFD-S300L only)  
CD  
Z
PUSH OPEN/CLOSE  
MEGA BASS  
Changing the AM/MWtuning interval  
Recording  
The type of the jack  
of the component  
to be connected  
Model number of  
the connecting cable  
LINE IN (CFD-S300L only)  
SLEEP  
locate  
a
specific track directly*  
a number button of the track  
The AM/MW tuning interval is preset to  
9
kHz at the factory.  
TAPE  
VOL –, +*  
locate  
a
point while listening  
>find th(feorpwoianrtd) or  
.
.
(backward) while playing until you  
(backward) in pause until you find  
If you need to change the AM/MW tuning interval, do the following:  
1
2
Press xZ to open the tape compartment and insert a blank tape. Use TYPE I  
(normal) tape only.  
to the sound  
locate point while observing  
the display  
1
2
While keeping the RADIO BAND•AUTO PRESET button and  
disconnect the mains lead from the mains.  
x
x
button pressed,  
button pressed,  
Optical miniplug  
(MiniDisc recorder, etc.)  
POC-15AB  
POC-15A  
i
a
>
(forward) or  
the point  
Select the programme source you want to record.  
While keeping the RADIO BAND•AUTO PRESET button and  
Square-shaped optical  
connector (MiniDisc  
*
You cannot locate  
a
specific track if “SHUF” or “PGM” is lit in the display. Turn off the indication by  
reconnect the mains lead to the mains. The tuning interval is changed and “AM 9”  
“MW 9” or “AM 10” “MW 10” appears in the display for seconds.  
To record from the CD player  
Press CD and insert a CD (See “Playing a CD”).  
pressing x.  
2
recorder, DAT recorder, etc.)  
Tip  
After changing the tuning interval, you need to reset your preset radio stations.  
To locate  
a
track numbered over 10, press >10 first, then the corresponding number buttons.  
To record from the radio  
OPERATE  
POWER)  
Example:To play track number 23, press >10 first, then  
2
and 3.  
Press RADIO BAND•AUTO PRESET and tune in the station you want (See  
“Listening to the radio”).  
2
3
4
Turn on the power of this player and the connected component.  
Make the connected component for recording.  
(
Presetting radio stations  
You can store radio stations into the player’s memory. You can preset up to 30 radio stations  
Using the display  
3
Press  
(n is depressed automatically.)  
Press  
z
to start recording.  
Press u to start playing a CD.  
(
CFD-S300), 20 for FM and 10 for AM in any order, or 40 radio stations (CFD-S300L), 20 for  
*
The button has  
a
tactile dot.  
To check the total track number and playing time  
Press DISPLAY•ENT•MEMORY in stop mode (see fig. D).  
FM and 10 for MW and LW in any order.  
To  
1
2
Press RADIO BAND•AUTO PRESET to select the band.  
stop recording  
pause recording  
xZ  
Listening to the sound from the connected components  
Display  
MODE  
To check the remaining time  
Press DISPLAY•ENT•MEMORY repeatedly while playing  
follows:  
Hold down RADIO BAND•AUTO PRESET for  
in the display.  
2
seconds until “AUTO” flashes  
X
1
Connect the LINE IN jack of this player with the line output jack or headphones  
jack of the other component using the audio connecting cable* (not supplied).  
OPR/BATT  
DISPLAY  
ENT MEMORY  
VOLUME –, +*  
a
CD. The display changes as  
Press the button again to resume recording.  
Tips  
Number buttons  
Remote sensor  
t
the current track number and playing time  
3
Press DISPLAY•ENT•MEMORY.  
The stations are stored in memory from the lower frequencies to the higher ones.  
Adjusting the volume or the audio emphasis will not affect the recording level.  
If the AM/MW/LW programme makes whistling sound after you've pressed  
MODE to select the position of ISS (Interference Suppress Switch) that most decreases the noise.  
For the best results, use the AC power as power source for recording.  
To erase recording, proceed as follows:  
tape with the recording you want to erase.  
* For MiniDisc recorder:  
* For TV, VCR: cable with  
on the other end.  
Press LINE to display “LInE”.  
Play the optional component connected to the LINE IN jack of the player.  
a
cable with  
a stereo-mini plug on both ends.  
r
the current track number and the remaining time on the current track*  
a
z
in step 3, press  
a
a
stereo-mini plug on one end and two phono plugs  
If  
a
station cannot be preset automatically  
a
Display  
r
the number of tracks left and remaining time on the CD  
You need to preset  
a
station with  
Press RADIO BAND•AUTO PRESET to select the band.  
Tune in station you want.  
Hold down the number buttons that you want to preset the new station on for about  
To select the preset number over 10, press >10 first, then the corresponding number buttons.  
You need to hold down the last number button to enter for about seconds.  
(Example: To select 12, press >10 and first, then hold down for about  
Tip  
a
weak signal manually.  
a
Insert a  
Press TAPE.  
Press z.  
2
3
1
2
3
1
2
3
D
E
a
Total track number  
Total playing time  
Programmed track  
Playing order  
*
For  
a
track whose number is more than 20, the remaining time appears as “- -:- -” in the display.  
2
seconds.  
TYiopu can record the sound from the connected component. Insert  
a blank tape into the tape compartment,  
and press z.  
2
Selecting the play mode  
Press MODE until “REP 1” “REP ALL” “SHUF” “SHUF REP” “PGM” “PGM REP” appears in  
the display. Then proceed as follows:  
1
2
2 seconds.)  
To turn on/off the power  
CFD-S300L: Press OPERATE.  
CFD-S300: Press POWER.  
Notes  
Falling asleep to music  
Connect the cords firmly to avoid any malfunction.  
When other components are not connected, close the cover for the OPTICAL DIGITAL OUT (CD)  
and LINE IN jacks to keep out dust.  
1
2
3
Play the music source you want.  
Press SLEEP to display “SLEEP.”  
Press SLEEP to select the minutes until the player goes off automatically.  
Each time you press the button, the indication changes as follows: “60”  
“OFF” “10” “20” “30”.  
The preset radio stations remain in memory even if you unplug the mains lead or remove the batteries.  
To  
Select  
Then do this  
To adjust the volume  
repeat  
a
single track  
“REP 1”  
Press the number button for the track you want to  
repeat.  
Press VOLUME +,  
(VOL +,  
on the remote).  
t
“90”  
t
“120”  
Playing preset radio stations  
t
t
t
t
repeat all tracks  
shuffle play  
“REP ALL”  
“SHUF”  
Press u.  
Press u.  
1
2
Press RADIO BAND•AUTO PRESET to select the band.  
Press the number buttons to tune in the stored station.  
To listen through headphones  
Connect the headphones to the (headphones) jack.  
i
To cancel the sleep function  
Press OPERATE (or POWER) to turn off the power.  
repeat tracks  
“SHUF REP” Press u.  
in random order  
To tune in a preset station over 10, press >10 first, then corresponding number  
buttons.  
(Example: To tune in a preset station 12, press >10 and 1 first, and then press 2.)  
Note  
Adjusting the sound emphasis  
When you are playing  
a
tape using this function:  
If the tape length of one side is longer than the set time, the player will not go off until the tape reaches  
the end.  
programme play  
“PGM” Press the number buttons for the tracks you want  
to programme in the order you want up to 20  
tracks (see fig. E). Then press u.  
To reinforce the bass sound  
Press MEGA BASS.  
On the remote  
repeat programmed tracks “PGM REP” Press the number buttons for the tracks you want  
to programme in the order you want up to 20  
tracks. Then Press u.  
1
2
Press BAND.  
Press PRESET  
MEGA BASS” appears in the display.  
+ or – to tune in the stored station.  
To return to normal sound, press the button again.  
To cancel selected play mode  
Press MODE until the selected mode disappears from the display.  
To check the programmed track and playing order in the display  
To check the order of tracks before play, press DISPLAY•ENT•MEMORY.  
Every time you press the button, the track number appears in the programmed order.  
To change the current programme  
x once if the CD is stopped and twice if the CD is playing. The current programme will be  
Press  
erased. Then create a new programme following the programming procedure.  
Tip  
You can record your own programme. After you’ve created the programme, insert a blank tape and  
press z to start recording.  

Außer der Anleitung Sony CFD-S300, veröffentlichen wir ebenfalls das Hilfspaneel, das Ihnen bei der Lösung der Probleme mit Sony CFD-S300 helfen wird. Wenn Sie Fragen haben, können Sie sie im unten angegebenem Formular stellen. Andere Nutzer, die hier reinschauen, werden dann die Möglichkeit haben, Ihnen bei der Lösung des Problems mit Sony CFD-S300 zu helfen. Denken Sie daran, dass Sie auch die Lösung mit anderen Teilen können. Wenn Sie es selbst geschafft haben, fügen Sie bitte hier die Beschreibung und die Lösung des Problems mit Sony CFD-S300 hinzu - damit helfen Sie bestimmt vielen Nutzern.

Probleme mit dem Gerät? Stellen Sie Fragen - unsere Nutzer können helfen

Es wurde noch kein Kommentar zu diesem Gerät/ dieser Anleitung hinzugefügt.