Chapter 2: Using the Remote Control
Indicator
Button Descriptions for TV Mode
ON-OFF
Arrows Used to point to different items in the TV menu and to adjust the menu
controls.
TV
DVD
SAT•CAB
VCR
Indicator Indicates the programming mode when programming the remote to
control components. Lights when you press a valid button on the remote. Flickers
when a button is pressed and the batteries are low.
AUX
AUDIO
(
0-9) Number Buttons Enter channel numbers and time settings directly
through the remote control.
CC
INFO
CLEAR
MENU
To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press
the two digits and expect a few seconds delay. This is in case you want to enter a
third digit.
OK
PRESETS
SKIP
CC Toggles closed captioning on and off.
GUIDE
CH + or CH - Scans up or down through the current channel list. Press once to
change the channel up or down; press and hold to continue changing channels.
VOL
CH
MUTE
GO
BACK
CLEAR Removes any menu or display from the screen and returns you to normal
viewing.
1
2
3
6
9
GO BACK Returns you to the previous channel.
4
7
5
8
INFO Brings up channel banner; press again to clear the screen.
INPUT Toggles through the available input sources (VID1/SVID1, VID2/CVID2,
INPUT
0
ANTENNA
FORWARD
CVID3, FRNT, and current channel).
REVERSE
PLAY
MENU Brings up the Main menu.
MUTE Reduces the TV’s volume to its minimum level. Press again to restore the
volume.
RECORD
STOP
PAUSE
OK When in the menu system, selects highlighted items.
ON•OFF When in TV mode, turns the TV on and off. If in another mode (VCR,
DVD, SAT•CAB, etc.), will turn the component on and off.
PRESETS Picture options are reset to original factory settings.
SKIP Press once before changing channels and the TV will go back to the original
channel after 30 seconds. Press repeatedly to add more time.
TV Turns on the TV and puts the remote in TV mode. Also displays current status.
VOL – or VOL + Decreases or increases the TV’s volume.
Button Descriptions for Other Modes
AUDIO Places the remote in audio mode to operate a component (such as an
audio receiver, or amplifier receiver) that you’ve programmed to work with this
button.
AUX Puts the remote in AUX mode. Can also be programmed to operate most
brands of an additional remote-controllable component.
ANTENNA In VCR mode, functions as a TV/VCR button. In SAT•CAB mode,
functions as a TV/receiver button.
DVD Puts the remote in DVD mode and, if auto tuning is enabled, will turn on the
TV and tune to the correct video input channel.
Chapter 2
Graphics contained within this publication are for representation only.
9
1616302A.02_Remote
9
4/15/04, 10:17 PM
Probleme mit dem Gerät? Stellen Sie Fragen - unsere Nutzer können helfen