Bedienungsanleitung Tannoy HITS100

Wenn Sie auf diese Seite gestoßen sind, dann haben Sie bestimmt ein Problem und benötigen eine Anleitung zum Gerät Tannoy HITS100. Denken Sie daran zu prüfen, ob es eine Anleitung zu genau diesem Gerät ist, was Sie suchen. In unserer Datenbank gehört Tannoy HITS100 zu der Kategorie Lautsprechersystem. Die Anleitung Tannoy HITS100kommt vom Produzenten, der Firma Tannoy - es ist ein offizielles Dokument, und wenn Sie irgendwelche Zweifel haben, was den Inhalt betrifft, kontaktieren Sie bitte den Geräteproduzenten Tannoy HITS100 direkt. Sie können die Anleitung Tannoy HITS100 direkt online anschauen, oder es auf Ihrem Computer speichern und aufbewahren.

HTS Manual 3/3/06 14:50 Page 4  
C
M
Y
CM MY CY CMY  
K
Position the satellite or centre speaker (with half the wall  
Check the alignment of the slot in the top of the tube  
(pointing backwards) and tighten the screws.  
bracket(s) fitted) against the other half of the wall bracket  
already fitted to the wall. Line up the brackets so that the  
long screw.pin can be inserted vertically from below the  
satellite or horizontally from the sides of the centre speaker  
and screwed up lightly. The speakers will now swing in  
the horizontal plane (vertical plane for the centre) for best  
aural and visual effect. Tighten the long screw/pin to finish.  
Place the satellite and stand bracket onto the top of the  
pole taking care to align the slot in the pole with the  
corresponding rib in the stand bracket.  
Pass the cable up through the centre of the tube and  
connect to the terminals on the satellite. Take care to  
preserve correct polarity, the conductor with the grey stripe  
connects to the black terminal.  
REAR  
1
to 2 METRE  
1
to 2 METRE  
SUB  
To remove the speakers from the wall to access the wiring  
terminals, remove the long screw/pin whilst carefully  
supporting the weight of the speaker.  
1 to 2 METRE  
REAR  
1
to 2 METRE  
ASSEMBLING THE STANDS  
Pass the metal pole through the base so that the flange  
locates in the round pocket in the underside of the base.  
0.3 METRE  
OR MORE  
Fit the 2 screws to the satelite speaker finger tight, check  
the alignment of the bracket and tighten the screws.  
DO NOT OVERTIGHTEN.  
Pull the cable gently from underneath the stand base to  
take up any slack.  
&
Locate the slot in the top end of the pole and assemble so  
that the slot points to the rear when the base points towards you.  
S E T  
U P  
I L L U S T R A T I O N  
Line up the 3 holes in the flange with the 3 threaded  
inserts in the base and fit 3 screws finger tight.  
Fit the stand bracket to the satellite covering the terminals  
and lining up the fixing holes.  
6
7
Composite  

Außer der Anleitung Tannoy HITS100, veröffentlichen wir ebenfalls das Hilfspaneel, das Ihnen bei der Lösung der Probleme mit Tannoy HITS100 helfen wird. Wenn Sie Fragen haben, können Sie sie im unten angegebenem Formular stellen. Andere Nutzer, die hier reinschauen, werden dann die Möglichkeit haben, Ihnen bei der Lösung des Problems mit Tannoy HITS100 zu helfen. Denken Sie daran, dass Sie auch die Lösung mit anderen Teilen können. Wenn Sie es selbst geschafft haben, fügen Sie bitte hier die Beschreibung und die Lösung des Problems mit Tannoy HITS100 hinzu - damit helfen Sie bestimmt vielen Nutzern.

Probleme mit dem Gerät? Stellen Sie Fragen - unsere Nutzer können helfen

Es wurde noch kein Kommentar zu diesem Gerät/ dieser Anleitung hinzugefügt.