Bedienungsanleitung Tannoy HITS100

Wenn Sie auf diese Seite gestoßen sind, dann haben Sie bestimmt ein Problem und benötigen eine Anleitung zum Gerät Tannoy HITS100. Denken Sie daran zu prüfen, ob es eine Anleitung zu genau diesem Gerät ist, was Sie suchen. In unserer Datenbank gehört Tannoy HITS100 zu der Kategorie Lautsprechersystem. Die Anleitung Tannoy HITS100kommt vom Produzenten, der Firma Tannoy - es ist ein offizielles Dokument, und wenn Sie irgendwelche Zweifel haben, was den Inhalt betrifft, kontaktieren Sie bitte den Geräteproduzenten Tannoy HITS100 direkt. Sie können die Anleitung Tannoy HITS100 direkt online anschauen, oder es auf Ihrem Computer speichern und aufbewahren.

HTS Manual 3/3/06 14:50 Page 5  
C
M
Y
CM MY CY CMY  
K
AV RECEIVER/DECODER OUTPUT PANEL  
PLACING THE CENTRE SPEAKER  
CONNECTING THE HTS SPEAKERS TO YOUR A/V  
RECEIVER OR AMPLIFER  
SUB OUT  
FRONT  
LEFT  
REAR  
LEFT  
CENTRE  
REAR  
_
RIGHT  
+
FRONT  
_
RIGHT  
+
Locate the special Centre Speaker performance platform  
within the packaging materials.  
_
_
_
+
+
+
Connect the speakers to the AV Home Cinema receiver or  
separate amplifier terminals as follows:  
Place the Centre Speaker onto the platform and rotate to a  
suitable angle.  
• Measure out suitable lengths of cable from the roll of  
cable supplied, to reach between the speakers and your  
AV or Home Cinema receiver speaker output terminals.  
POSITIONING THE HTS SPEAKERS  
Place the speakers in positions relative to the viewing screen  
in your room as follows:  
Note that the cable is polarised, that is the cable has a  
grey stripe along one of the two conductors. Use this as  
a guide to connect black terminals on the speakers to  
black terminals on your equipment.  
Centre speaker close to, and either above or below  
the screen.  
Wire up the system connecting each speaker to the  
appropriate terminals on the receiver or amplifier making  
quite sure that cables connect red to red terminals  
Front Left speaker 1 to 2 metres to the left of the screen.  
Front Right speaker 1 to 2 metres to the right of the screen  
(+ to +) and black to black terminals, (- to -). Take care  
to distinguish between left and right channels, and the  
front and rear channels, as seen from the viewing position.  
Try to get all 3 front speakers to be in the same plane - the  
same distance from the viewing position and at least 300mm  
(
behind the screen. Continue positioning the rear speakers  
as follows:  
12 inches) away from any back wall which may be present  
This is a very important stage in setting up. Getting things  
wrong at this stage is the most likely reason for disappointing  
results when troubleshooting the system.  
Left Rear speaker 1 to 2 metres behind the viewing position  
and to the left.  
CONNECTING THE HTS SUBWOOFER  
TO YOUR SYSTEM  
Right Rear speaker 1 to 2 metres behind the viewing  
position and to the right.  
The HTS subwoofer should be connected directly to your 5.1  
decoder, AV home cinema receiver or integrated DVD/ decoder/  
amplifier as follows:.  
Viewed from above, Front Left, Front Right, Left Rear and  
Right Rear speakers should form a rectangle with the viewing  
position in the centre of the rectangle.  
0
180  
5
0
200  
MIN MAX  
PHASE  
(
Deg rees)  
Locate the RCA or Phono socket on your equipment  
labelled 'LFE OUT','SUB OUT' or 'SUBWOOFER OUTPUT'.  
POWER  
Place the subwoofer on the floor alongside the wall nearest  
to the screen. The exact position isn't critical and can be  
adjusted once the system is up and running.  
LEFT  
RIGHT  
LINE INPUT  
SPEAKER LEVEL INPUT  
Using a single RCA to RCA (also known as phono to  
phono) good quality interconnect cable of suitable length,  
connect from the 'LFE/SUB/SUBWOOFER OUTPUT' on  
your equipment to the 'LINE INPUT' on the HTS100/  
HTS System Set-Up Guide  
DO NOT PLACE THE SUBWOOFER CLOSER THAN 1  
METRE FROM A VIEWING SCREEN USING A CATHODE  
RAY TUBE. This warning does not apply to Plasma and  
LCD screens.  
This high performance 5.1 system has  
been built and tested with care and  
precision, to provide first class performance  
and reliable operation. To ensure maximum  
benefit from ownership, and for reasons  
of safety, please read the following  
OFF  
ON  
230V  
115V  
200 subwoofer.  
VOLTAGE SELECTION  
This is an ideal positioning set-up, in practice there will be  
inevitable compromises depending on your room layout and  
the furniture within it. Refer to your decoder or AV Home  
Cinema receiver instructions for further advice in compensating  
for non-ideal situations.  
Locate and connect the mains lead supplied to the  
HTS subwoofer.  
AC LINE IN 115/230V~60/50 Hz  
information before using for the first time.  
1
15V~T1.6AL 250V FUSE  
30V~T800mAL 250V FUSE  
POWER CONSUMPTION 60W MAX  
2
DO NOT CONNECT THE MAINS LEAD (POWER CORD)  
TO THE MAINS POWER SUPPLY JUST YET.  
8
9
Composite  

Außer der Anleitung Tannoy HITS100, veröffentlichen wir ebenfalls das Hilfspaneel, das Ihnen bei der Lösung der Probleme mit Tannoy HITS100 helfen wird. Wenn Sie Fragen haben, können Sie sie im unten angegebenem Formular stellen. Andere Nutzer, die hier reinschauen, werden dann die Möglichkeit haben, Ihnen bei der Lösung des Problems mit Tannoy HITS100 zu helfen. Denken Sie daran, dass Sie auch die Lösung mit anderen Teilen können. Wenn Sie es selbst geschafft haben, fügen Sie bitte hier die Beschreibung und die Lösung des Problems mit Tannoy HITS100 hinzu - damit helfen Sie bestimmt vielen Nutzern.

Probleme mit dem Gerät? Stellen Sie Fragen - unsere Nutzer können helfen

Es wurde noch kein Kommentar zu diesem Gerät/ dieser Anleitung hinzugefügt.