Bedienungsanleitung Extron electronic XPA 1002

Wenn Sie auf diese Seite gestoßen sind, dann haben Sie bestimmt ein Problem und benötigen eine Anleitung zum Gerät Extron electronic XPA 1002. Denken Sie daran zu prüfen, ob es eine Anleitung zu genau diesem Gerät ist, was Sie suchen. In unserer Datenbank gehört Extron electronic XPA 1002 zu der Kategorie Stereoverstärker. Die Anleitung Extron electronic XPA 1002kommt vom Produzenten, der Firma Extron electronic - es ist ein offizielles Dokument, und wenn Sie irgendwelche Zweifel haben, was den Inhalt betrifft, kontaktieren Sie bitte den Geräteproduzenten Extron electronic XPA 1002 direkt. Sie können die Anleitung Extron electronic XPA 1002 direkt online anschauen, oder es auf Ihrem Computer speichern und aufbewahren.

Operation  
Front Panel Features and Operation  
1
2
2
3a  
LIMITER/PROTECT  
• When audio clipping occurs, the corresponding channel’s  
LED blinks once per clip occurrence.  
When the output wiring is shorted together  
OVER  
TEMP  
1
2
LIMITER/PROTECT  
SIGNAL  
1
XPA 1002  
When the amplifier overheats, both LEDs are lit. The LEDs  
are not lit after the amplifier recovers from the overheated  
condition.  
XPA 1002  
Front Panel  
4a  
When DC output is detected, the amplifier is malfunctioning  
and the LED for the corresponding channel is lit. The  
amplifier requires servicing when this event occurs.  
2
3b  
N
These LEDs are also located on the rear panel.  
OVER  
TEMP  
LIMITER/PROTECT  
SIGNAL  
1
XPA 2001  
Limiter/Protect indicator LED — This LED (representing the  
output channel) lights red under four circumstances:  
Ö
XPA 2001-70V,  
XPA 2001-100V  
Front Panel  
• When the output wiring is shorted together  
• When audio clipping occurs, the LED blinks once per clip  
4
b
occurrence.  
When the amplifier overheats, the LED is lit. The LED is not  
lit after the amplifier recovers from the overheated condition.  
Power indicator LED — This LED lights:  
a Green when the amplifier is receiving full power.  
• When DC output is detected, the amplifier is malfunctioning  
and the LED is lit. The amplifier requires servicing when this  
event occurs.  
Amber when the amplifier is in Standby mode. Standby  
mode turns off all outputs from the amplifier, although the  
amplifier is still receiving power.  
N
This LED is also located on the rear panel.  
See fof “Rear Panel Features” in this chapter.  
Signal indicator LEDs (channels 1 and 2) — These LEDs  
Ü (representing input channels 1 and 2) light green only when an  
Over Temp indicator LED — This LED lights red when the  
amplifier exceeds the recommended ambient temperature for  
optimal lifetime. The LED will turn off after the amplifier has  
cooled down sufficiently.  
b
input signal is detected on the corresponding channel.  
1
2
Should the LED light, check the following:  
Verify that the placement of the amplifier allows for adequate  
ventilation and airꢀow.  
SIGNAL  
Avoid placing other equipment on top of the amplifier.  
Verify that the operating temperature is within the specified  
range.  
N
These LEDs are also located on the rear panel.  
Signal indicator LED — This LED (representing the input  
channel) lights green only when an input signal is detected.  
á
Limiter/Protect indicator LEDs (channels 1 and 2) — These  
LEDs (representing output channels 1 and 2) light red under  
four circumstances:  
Ñ
N
This LED is also located on the rear panel.  
3
-2  
XTRA Series • Operation  
XTRA Series • Operation  
3-3  

Außer der Anleitung Extron electronic XPA 1002, veröffentlichen wir ebenfalls das Hilfspaneel, das Ihnen bei der Lösung der Probleme mit Extron electronic XPA 1002 helfen wird. Wenn Sie Fragen haben, können Sie sie im unten angegebenem Formular stellen. Andere Nutzer, die hier reinschauen, werden dann die Möglichkeit haben, Ihnen bei der Lösung des Problems mit Extron electronic XPA 1002 zu helfen. Denken Sie daran, dass Sie auch die Lösung mit anderen Teilen können. Wenn Sie es selbst geschafft haben, fügen Sie bitte hier die Beschreibung und die Lösung des Problems mit Extron electronic XPA 1002 hinzu - damit helfen Sie bestimmt vielen Nutzern.

Probleme mit dem Gerät? Stellen Sie Fragen - unsere Nutzer können helfen

Es wurde noch kein Kommentar zu diesem Gerät/ dieser Anleitung hinzugefügt.