Bedienungsanleitung Extron electronic XPA 1002

Wenn Sie auf diese Seite gestoßen sind, dann haben Sie bestimmt ein Problem und benötigen eine Anleitung zum Gerät Extron electronic XPA 1002. Denken Sie daran zu prüfen, ob es eine Anleitung zu genau diesem Gerät ist, was Sie suchen. In unserer Datenbank gehört Extron electronic XPA 1002 zu der Kategorie Stereoverstärker. Die Anleitung Extron electronic XPA 1002kommt vom Produzenten, der Firma Extron electronic - es ist ein offizielles Dokument, und wenn Sie irgendwelche Zweifel haben, was den Inhalt betrifft, kontaktieren Sie bitte den Geräteproduzenten Extron electronic XPA 1002 direkt. Sie können die Anleitung Extron electronic XPA 1002 direkt online anschauen, oder es auf Ihrem Computer speichern und aufbewahren.

Operation, cont’d  
N
On the XPA 2001, the single control adjusts the levels  
of both channels simultaneously prior to summing them  
together.  
Tip  
Sleeve  
Tip  
Ring  
Sleeves  
Tip  
Ring  
Tip  
Sleeve  
To adjust the XPA amplifier's input level, do the following:  
1
.
If connecting to a source device with a volume control  
(variable output), ensure that the volume on the source  
Unbalanced Mono Input  
Balanced Mono Input  
(high impedance)  
device is set to its lowest point, then adjust the level(s) of  
the XPA fully counterclockwise.  
2
3
.
.
Set the source device's volume to its maximum volume  
level. No sound should come out.  
Do not tin the wires!  
Return to the XPA amplifier and raise the level(s) until  
sound distortion occurs, then lower the level(s) slightly  
until any distortion disappears. This setting ensures that,  
whatever the source device volume setting may be, no  
clipping occurs.  
Remote control connector — The 3.5 mm 5-pin captive screw  
receptacle is used to remotely control two functions through  
contact closure: See the following circuit diagram.  
f
Pins 1, 2, and 3 control volume by varying the DC voltage  
from 0 V (full attenuation) to 10 V (maximum volume) with  
full muting in effect when pin 2 is connected to ground (pin3).  
Use the included 3-pin captive screw connector. See "Remote  
volume control" in this chapter.  
N
When setting volume control through a source device,  
ensure that the device's volume is set to variable out.  
Consult the device's user manual for detailed instructions  
on its calibration.  
10V  
50 mA  
VOL/MUTE  
Balanced or unbalanced stereo audio input connector — Wire  
the 3.5 mm 5-pin captive screw connector for balanced or  
unbalanced input.  
à
1
2
3
Tip  
Sleeve  
Tip  
Ring  
STANDBY  
Sleeves  
Tip  
Tip  
Sleeve  
1
2
10 V  
Ring  
MAX  
0K OHMS  
MIN  
Unbalanced Stereo Input  
Balanced Stereo Input  
2K OHMS  
MUTE  
1
VOL/MUTE  
MUTE SWITCH  
3
VOLUME  
Do not tin the wires!  
GND  
N
The XPA 1002's output power can be effectively doubled  
by using only one input channel and bridging the output.  
The XPA 1002 will output 200 watts @ 8 ohms or 120  
watts @ 16 ohms in bridged mode.  
See "Bridged mono output" in this chapter for wiring  
instructions when bridging the XPA 1002.  
Balanced or unbalanced mono audio input connector — Wire  
the 3.5 mm 5-pin captive screw connector for balanced or  
unbalanced input.  
â
3
-6  
XTRA Series • Operation  
XTRA Series • Operation  
3-7  

Außer der Anleitung Extron electronic XPA 1002, veröffentlichen wir ebenfalls das Hilfspaneel, das Ihnen bei der Lösung der Probleme mit Extron electronic XPA 1002 helfen wird. Wenn Sie Fragen haben, können Sie sie im unten angegebenem Formular stellen. Andere Nutzer, die hier reinschauen, werden dann die Möglichkeit haben, Ihnen bei der Lösung des Problems mit Extron electronic XPA 1002 zu helfen. Denken Sie daran, dass Sie auch die Lösung mit anderen Teilen können. Wenn Sie es selbst geschafft haben, fügen Sie bitte hier die Beschreibung und die Lösung des Problems mit Extron electronic XPA 1002 hinzu - damit helfen Sie bestimmt vielen Nutzern.

Probleme mit dem Gerät? Stellen Sie Fragen - unsere Nutzer können helfen

Es wurde noch kein Kommentar zu diesem Gerät/ dieser Anleitung hinzugefügt.