Bedienungsanleitung Pioneer Elite SC-07

Wenn Sie auf diese Seite gestoßen sind, dann haben Sie bestimmt ein Problem und benötigen eine Anleitung zum Gerät Pioneer Elite SC-07. Denken Sie daran zu prüfen, ob es eine Anleitung zu genau diesem Gerät ist, was Sie suchen. In unserer Datenbank gehört Pioneer Elite SC-07 zu der Kategorie Stereoempfänger. Die Anleitung Pioneer Elite SC-07kommt vom Produzenten, der Firma Pioneer - es ist ein offizielles Dokument, und wenn Sie irgendwelche Zweifel haben, was den Inhalt betrifft, kontaktieren Sie bitte den Geräteproduzenten Pioneer Elite SC-07 direkt. Sie können die Anleitung Pioneer Elite SC-07 direkt online anschauen, oder es auf Ihrem Computer speichern und aufbewahren.

SC07-05.book Page 13 Friday, April 25, 2008 11:59 AM  
Simple Home Theater Guide  
02  
Phase Control technology provides coherent sound  
This receiver analyzes the frequency-phase  
reproduction through the use of phase matching1 for an  
optimal sound image at your listening position. The  
default setting is on and we recommend leaving Phase  
Control switched on for all sound sources.  
characteristics of the speakers by calibrating test signals  
output from the speakers with the supplied microphone,  
therefore flattening the analyzed frequency-phase  
characteristics during audio signal playback2 – the same  
correction is made for a pair of left and right speakers.  
This correction minimizes group delay between the  
ranges of a speaker and improves the frequency-phase  
characteristics across all ranges.  
CATEGORY  
RETURN  
HOME  
MENU  
TUNE  
iPod CTRL  
STATUS  
TV SOURCE RCV  
PHASE CTRL  
CH LEVEL  
MEMORY  
THX  
MPX  
CH  
VOL  
VOL  
Furthermore, the enhanced frequency-phase  
characteristics between channels ensure better  
surround sound integration for multichannel setting.3  
AUTO/  
STEREO/  
A.L.C.  
DIRECT  
STANDARD ADV SURR  
PGM  
Set the operation selector switch to RCV, then  
press PHASE CTRL (PHASE CONTROL) to select PHASE  
CONTROL.  
Full Band Phase Control OFF  
The PHASE CONTROL indicator on the front panel lights.  
Using Full Band Phase Control  
The Full Band Phase Control feature calibrates the  
frequency-phase characteristics of the speakers  
connected.  
Tweeter  
Midrange  
Woofer  
Standard speakers designed exclusively for audio use  
generally reproduce sound with the divided frequency  
bands output from a speaker system consisting of  
multiple speakers (in case of typical 3-way speakers, for  
instance, the tweeter, the squawker (midrange), and the  
woofer output sound in the high-, middle-, and low-  
frequency ranges, respectively). Though these speakers  
are designed to flatten the frequency-amplitude  
characteristics across wide ranges, there are cases  
where the group delay characteristics are not effectively  
flattened. This phase distortion of the speakers  
subsequently causes group delay (the delay of low-  
frequency sound against high-frequency sound) during  
audio signal playback.  
Group Delay Characteristics  
ms  
Hz  
Sound in the middle- and low-frequency ranges is  
delayed against the high-frequency sound due to group  
delay.  
Note  
1
• Phase matching is a very important factor in achieving proper sound reproduction. If two waveforms are ‘in phase’, they crest and trough  
together, resulting in increased amplitude, clarity and presence of the sound signal. If a crest of a wave meets a trough (as shown in the upper  
section of the diagram above), then the sound will be ‘out of phase’ and an unreliable sound image will be produced.  
The PHASE CONTROL feature is available even when the headphones are plugged in.  
If your subwoofer has a phase control switch, set it to the plus (+) sign (or 0°). However, the effect you can actually feel when PHASE  
CONTROL is set to ON on this receiver depends on the type of your subwoofer. Set your subwoofer to maximize the effect. It is also  
recommended you try changing the orientation or the place of your subwoofer.  
Set the built-in lowpass filter switch of your subwoofer to off. If this cannot be done on your subwoofer, set the cutoff frequency to a higher  
value.  
If the speaker distance is not properly set, you may not have a maximized PHASE CONTROL effect.  
The PHASE CONTROL mode cannot be set to ON in the following cases:  
When the PURE DIRECT mode is switched on.  
When the MULTI CH IN input is selected.  
When the HDMI audio output parameter is set to THROUGH in Setting the Audio options on page 96.  
2
3
To calibrate and analyze the frequency-phase characteristics of the speakers, either follow the Full Auto MCACC procedure under Advanced  
MCACC (see Automatically setting up for surround sound (MCACC & Full Band Phase Control) on page 10), or set Auto MCACC menu under  
Auto MCACC under Advanced MCACC to FULL BAND PHASE CTRL. Select ALL when you perform the Auto MCACC with Auto MCACC  
menu. Upon calibration of the frequency-phase characteristics of the speakers, the FULL BAND PHASE CTRL feature is automatically  
switched on. Note that FULLBAND PHASE cannot be selected unless the frequency-phase characteristics of the speakers are calibrated.  
The original characteristics of group delay of the speakers calibrated and the targeted characteristics after correction can be displayed  
graphically in the OSD (see Using Full Band Phase Control on page 13). Also, when your PC is connected to this receiver, the original  
characteristics of group delay of the speakers calibrated and the corrected characteristics of group delay can be displayed in 3-dimension on  
your PC (see Advanced MCACC output using your PC on page 72).  
1
3
En  

Außer der Anleitung Pioneer Elite SC-07, veröffentlichen wir ebenfalls das Hilfspaneel, das Ihnen bei der Lösung der Probleme mit Pioneer Elite SC-07 helfen wird. Wenn Sie Fragen haben, können Sie sie im unten angegebenem Formular stellen. Andere Nutzer, die hier reinschauen, werden dann die Möglichkeit haben, Ihnen bei der Lösung des Problems mit Pioneer Elite SC-07 zu helfen. Denken Sie daran, dass Sie auch die Lösung mit anderen Teilen können. Wenn Sie es selbst geschafft haben, fügen Sie bitte hier die Beschreibung und die Lösung des Problems mit Pioneer Elite SC-07 hinzu - damit helfen Sie bestimmt vielen Nutzern.

Probleme mit dem Gerät? Stellen Sie Fragen - unsere Nutzer können helfen

Es wurde noch kein Kommentar zu diesem Gerät/ dieser Anleitung hinzugefügt.