Wenn Sie auf diese Seite gestoßen sind, dann haben Sie bestimmt ein Problem und benötigen eine Anleitung zum Gerät Rotel RT-1082. Denken Sie daran zu prüfen, ob es eine Anleitung zu genau diesem Gerät ist, was Sie suchen. In unserer Datenbank gehört Rotel RT-1082 zu der Kategorie Stereoanlage. Die Anleitung Rotel RT-1082kommt vom Produzenten, der Firma Rotel - es ist ein offizielles Dokument, und wenn Sie irgendwelche Zweifel haben, was den Inhalt betrifft, kontaktieren Sie bitte den Geräteproduzenten Rotel RT-1082 direkt. Sie können die Anleitung Rotel RT-1082 direkt online anschauen, oder es auf Ihrem Computer speichern und aufbewahren.

9

English  

Direct Access Tuning rL  

If you know the exact frequency of the de-  

sired station, you may tune it directly using  

the FREQUENCY DIRECT button and the  

NUMERIC buttons.  

Auto Tuning Button wH  

PRESET SCAN Button F  

This button activates a preset scanning feature.  

When you press the button, the tuner will  

automatically scan through all memorized  

station presets, playing each for five seconds  

before moving to the desired station preset,  

press the button again.  

The AUTO TUNING button toggles between  

the frequency search tuning feature and  

manual frequency tuning. When using the  

TUNING controls on the front panel or remote  

in AUTO TUNING mode, the tuner will begin  

automatically scanning up or down through the  

frequencies until the next receivable broadcast  

signal is detected. If this is not the desired sta-  

tion, use the TUNING controls again to find  

the next station. Weak stations will be skipped  

during auto tuning. If no receivable signal is  

detected, the tuner will revert to the previously  

tuned station. To toggle between FREQUENCY  

TUNING mode and AUTO TUNING mode,  

press the AUTO TUNING button. An AUTO  

indicator will appear in the display.  

1

. Press the FREQUENCY DIRECT button to  

change the NUMERIC buttons from station  

preset to direct access mode. The station  

frequency in the front panel display will  

change to a series of bars, representing the  

digits of a station frequency, with the first bar  

blinking.  

NOTE:If a PRESET station is currently  

tuned when the PRESET SCAN button is  

pressed, scanning will start with the next  

higher preset number and continue through  

all preset stations, stopping on the initial  

preset. If a PRESET station is not currently  

tuned when the button is pressed, scanning  

will start from PRESET 1 and continue to  

PRESET 30.  

2

. Enter the first digit of the station frequency  

using the NUMERIC buttons. The digit will  

appear in the frequency display and the next  

bar will flash. Enter the remaining digits of the  

frequency. When all of the digits have been  

entered, the tuner will automatically tune to  

the displayed station frequency.  

NOTE:AUTO TUNING mode is disen-  

gaged when the TUNE/PRESET button is set  

to PRESET tuning mode. See the following  

section.  

FM MONO 4I  

The FM MONO button changes the FM mode  

from stereo reception to mono reception. In  

stereo mode, a stereo signal will be heard if the  

stationisbroadcastingastereosignalandthere  

is sufficient signal strength. A stereo indicator  

will light in the front panel display. In mono  

mode, a mono signal will be heard even if the  

station is broadcasting a stereo signal.  

NOTE:On the USA version only, pressing  

in the FM mode will enter 10 as the digit  

1

in the frequency display. On the European  

version, it is necessary to press 1 and then  

TUNE/PRESET Button e  

0

to enter 10. For US FM stations, press  

The TUNE/PRESET button toggles between  

FREQUENCY TUNING mode (the TUNING  

controls advance to the next station frequency)  

and PRESET TUNING mode (the TUNING  

controls advance to the next memorized station  

preset). To toggle between the two modes, press  

the TUNE/PRESET button. A PRESET indicator  

in the front panel DISPLAY will light when the  

PRESET mode is active.  

only one digit following the decimal point as  

shown in the first example following. For  

European FM stations, press two digits after  

the decimal point as shown in the second  

example.  

NOTE:Switching to mono mode can be a  

useful way to improve the reception of weak  

or distant FM signals. Less signal strength is  

required for clean mono reception than for  

stereo reception.  

EXAMPLES:  

•

•

•

•

(USA FM) 87.50MHz Press 8>7>5  

(Europe FM) 87.50MHz Press 8>7>5>0  

(USA AM) 1610kHz Press 1>6>1  

(Europe AM) 1611kHz Press 1>6>1>1  

NOTE:AUTO TUNING mode is disen-  

gaged when the TUNE/PRESET button is set  

to PRESET tuning mode.  

If no frequency is entered within 5 seconds,  

the tuner will cancel FREQUENCY DIRECT  

tuning mode and revert to the last previously  

tuned station.  

• ← Previous
• Next page →

Außer der Anleitung Rotel RT-1082, veröffentlichen wir ebenfalls das Hilfspaneel, das Ihnen bei der Lösung der Probleme mit Rotel RT-1082 helfen wird. Wenn Sie Fragen haben, können Sie sie im unten angegebenem Formular stellen. Andere Nutzer, die hier reinschauen, werden dann die Möglichkeit haben, Ihnen bei der Lösung des Problems mit Rotel RT-1082 zu helfen. Denken Sie daran, dass Sie auch die Lösung mit anderen Teilen können. Wenn Sie es selbst geschafft haben, fügen Sie bitte hier die Beschreibung und die Lösung des Problems mit Rotel RT-1082 hinzu - damit helfen Sie bestimmt vielen Nutzern.