BACKGROUND: Selects the background
colour or picture on the TV screen. If you set
JACKET PICTURE,” even though the disc
does not contain a jacket picture, the
You can adjust various settings.
Press DISPLAY when the player is in stop
GRAPHICS” picture appears.
(SETUP), and then
select “CUSTOM.” The CUSTOM menu
AUTO STANDBY: Sets the Auto Standby
setting on or off. If you select “ON,” the player
enters standby mode when left in stop mode for
more than 30 minutes.
AUTO PLAY: When set to “ON,” the player
automatically starts playback when the player is
turned on by a timer (not supplied).
PAUSE MODE: Selects the picture in pause
mode. Normally select “AUTO.” When the
picture is output in high resolution, set to
Item Name, Function
OSD (On-Screen Display): Switches the
display language on the screen.
FRAME.” (DVD only)
MENU* : Selects the desired language for the
TRACK SELECTION: Gives the sound track
which contains the highest number of channels
priority when you play a DVD VIDEO on
which multiple audio formats (PCM, MPEG
audio, DTS, or Dolby Digital format) are
recorded. If you select “AUTO,” priority is
given. (DVD VIDEO only)
MULTI-DISC RESUME: Switches the Multi-
disc Resume setting on or off. Resume playback
can be stored in memory for up to 6 different
DVD VIDEOs/VIDEO CDs. If you start the
settings again, the resume point is cleared.
disc’s menu. (DVD VIDEO only)
AUDIO* : Switches the language of the sound
track. When you select “ORIGINAL,” the
language given priority in the disc is selected.
DVD VIDEO only)
SUBTITLE* : Switches the language of the
subtitle recorded on the DVD VIDEO. When
you select “AUDIO FOLLOW,” the language
for the subtitles changes according to the
language you selected for the sound track.
DVD VIDEO only)
DVD VIDEO/VIDEO CD only)
TV TYPE: Selects the aspect ratio of the
AUDIO DRC (Dynamic Range Control)*2:
Set according the surrounding environment. Set
to “TV MODE” when the smallest sounds are
indiscernible, or set to “WIDE RANGE” when
the listening environment is good, for example,
in a home movie theatre.
DOWNMIX* : Switches the method for
mixing down to 2 channels when you play a
DVD which has rear sound elements (channels),
or is recorded in Dolby Digital format.
Normally select “DOLBY SURROUND.”
DIGITAL OUT: Selects if audio signals are
output via the DIGITAL OUT (COAXIAL)
jack. When you select “ON,” set also the
following “DOLBY DIGITAL,” “MPEG,”
:3 LETTER BOX
:3 PAN SCAN
DTS,” or “48kHz/96kHz PCM.”
DOLBY DIGITAL: Selects the type of Dolby
Digital signal. Set to “D-PCM” when the player
is connected to an audio component without a
built-in Dolby Digital decoder.
MPEG: Selects the type of MPEG audio signal.
Set to “MPEG” when the player is connected to
an audio component with a built-in MPEG
COLOR SYSTEM (VIDEO CD): Selects the
colour system when you play a VIDEO CD. If
your TV is the DUAL system, select “AUTO.”
SCREEN SAVER: When set to “ON,” the
screen saver appears when the player is in pause
or stop mode for 15 minutes. Press Nto turn
off the screen saver.