Manual de instrucciones Sony Bravia KDL-26E4000

Si has encontrado esta página, seguramente tienes un problema y necesitas el manual de instrucciones para el dispositivo Sony Bravia KDL-26E4000. Recuerda comprobar si es el manual exacto para el dispositivo que buscas. En nuestra base Sony Bravia KDL-26E4000 pertenece a la categoría Televisión plana. El manual Sony Bravia KDL-26E4000 es del fabricante, la empresa Sony - es un documento oficial y si tienes alguna duda acerca de su contenido, contacta directamente con el fabricante del dispositivo Sony Bravia KDL-26E4000. El manual Sony Bravia KDL-26E4000 se puede ver directamente online o guardar y almacenar en tu ordenador. Page 36 Wednesday, March 19, 2008 9:51 AM  
Remove the connected USB device. It can be damaged or  
not supported by the TV.  
Check the website below for updated information about  
compatible USB devices:  
Check whether the 1 (standby) indicator is  
flashing in red.  
When it is flashing  
The self-diagnosis function is activated.  
No sound, but good picture  
Press 2 +/– or % (Mute).  
Check if the “Speaker” is set to “TV Speaker” (page 27).  
When using HDMI input with Super Audio CD or DVD-  
output audio signals.  
Count how many 1 (standby) indicator flashes  
between each two second break.  
For example, the indicator flashes three times, then  
there is a two second break, followed by another  
three flashes, etc.  
The desired channel cannot be selected  
Switch between digital and analogue mode and select the  
desired digital/analogue channel.  
Press 1 on the top edge of the TV to turn it off,  
disconnect the mains lead, and inform your  
dealer or Sony service centre of how the  
indicator flashes (number of flashes).  
Some channels are blank  
Scrambled/Subscription only channel. Subscribe to the  
pay TV service.  
Channel is used only for data (no picture or sound).  
Contact the broadcaster for transmission details.  
When it is not flashing  
Check the items in the tables below.  
If the problem still persists, have your TV  
serviced by qualified service personnel.  
Digital channels are not displayed  
Contact a local installer to find out if digital transmissions  
are provided in your area.  
Upgrade to a higher gain aerial.  
No picture (screen is dark) and no sound  
Check the aerial/cable connection.  
Connect the TV to the mains, and press 1on the top edge  
of the TV.  
Distorted picture and/or sound  
If the 1 (standby) indicator lights up in red, press "/1.  
Keep the TV away from electrical noise sources such as  
cars, motorcycles, hair-dryers or optical equipment.  
When installing optional equipment, leave some space  
between the optional equipment and the TV.  
Check the aerial/cable connection.  
Keep the aerial/cable TV cable away from other  
connecting cables.  
No picture or no menu information from  
equipment connected to the scart connector  
then select the desired input.  
Check the connection between the optional equipment  
and the TV.  
to display the connected equipment list,  
Double images or ghosting (only in analogue  
The TV turns off automatically (the TV enters  
standby mode)  
Check the aerial/cable connection.  
Check the aerial location and direction.  
Check if the “Sleep Timer” is activated, or confirm the  
“Duration” setting of “On Timer Settings” (page 25).  
If no signal is received and no operation is performed in  
the TV mode for 10 minutes, the TV automatically  
switches to standby mode.  
Only snow and noise appear on the screen (only  
in analogue mode)  
Check if the aerial is broken or bent.  
The TV turns on automatically  
• Check if the “On Timer” is activated (page 25).  
Check if the aerial has reached the end of its serviceable  
life (three to five years in normal use, one to two years at  
the seaside).  
Some input sources cannot be selected  
Select “AV Preset” and cancel “Skip” of the input source  
page 26).  
Picture or sound noise when viewing a TV  
channel (only in analogue mode)  
Adjust “AFT” (Automatic Fine Tuning) to obtain better  
picture reception (page 28).  
The remote does not function  
• Replace the batteries.  
Some tiny black points and/or bright points  
appear on the screen  
A channel cannot be added to the Favourite list  
Up to 999 channels can be stored in the Favourite list.  
The picture of a display unit is composed of pixels. Tiny  
black points and/or bright points (pixels) on the screen do  
not indicate a malfunction.  
HDMI equipment does not appear on “HDMI  
Device List”  
Check that your equipment is “Control for HDMI”  
compatible equipment.  
No colour on programmes  
• Select “Reset” (page 22).  
Not all channels are tuned  
No colour or irregular colour when viewing a  
signal from the COMPONENT IN sockets  
Check the connection of the COMPONENT  
IN sockets and check if each sockets are firmly seated in  
their respective sockets.  
Check support web site for cable provide information.  
You cannot select “Off” in “Control for HDMI”.  
If any “Control for HDMI” compatible audio equipment  
is connected to the TV, you cannot select “Off” in this  
menu. If you want to change the audio output to the TV  
speaker, select “TV Speaker” in the “Speaker” menu  
(page 27).  
Picture freezes or contains blocks on the screen  
Check signal level (page 31). If signal bar is red (no  
signal) or amber (low signal), check the aerial/ cable  

Además del manual Sony Bravia KDL-26E4000 facilitamos un panel de soporte que te ayudará a solucionar tus problemas con Sony Bravia KDL-26E4000. Si tienes alguna pregunta, puedes escribirla en el formulario más abajo. Otros usuarios que entran aquí tendrán la oportunidad de ayudarte en la solución de tu problema con Sony Bravia KDL-26E4000. Recuerda que también puedes compartir tu solución. Si has logrado solucionar el problema, por favor escribe aquí la descripción y la solución del problema con Sony Bravia KDL-26E4000 - seguro que ayudarás a muchos usuarios.

¿Tienes problemas con un dispositivo? Haz una pregunta - nuestros usuarios pueden ayudarte

Nadie ha añadido un comentario para este dispositivo/manual todavía