Most TV channels broadcast information via Teletext. The index page of the teletext service (usually page 100) gives
you information on how to use the service. Please use a TV channel with a strong signal, otherwise there may be Teletext
Switching Teletext on and off
. Select the TV channel which carries the teletext service you want to view.
. Press the button once for Picture and Teletext (P&T). The screen is divided in two,
with the TV channel in the right corner and the Teletext display on the left.
In P&T mode press
screen. Press b or B to change the size of the TV screen then press
then press PROGR+/- to change the channel of the TV
to resume normal teletext reception.
twice to get Teletext only.
three times for Mix mode.
a fourth time to switch off Teletext.
To exit Teletext mode at any time, press the
button on the remote control.
Selecting a Teletext page
Input three digits for the page number using the numbered buttons on the remote control. If
you make a mistake, type in any three digits then re-enter the correct page number.
Using Other Teletext Functions
Selecting the next or preceding page
buttons on the remote control to select the previous or next page.
Selecting a sub page
A teletext page may consist of several sub pages. In this case an information line is displayed,
showing the number of subpages. Select the sub page by pressing v or V.
02 03 04 05 06 07 08
To freeze a Teletext page
button to freeze the page. Press again to cancel the freeze.
Revealing the index page
button to reveal the index page (normally page 100).
Using colour buttons to access pages (Fastext)
only available if the TV station broadcasts Fastext signals)
When the colour coded menu appears at the bottom of a page, press a coloured button on the
remote control (green, red, yellow or blue) to access the corresponding page.
Using the feature ‘Page Catching’
. Press the numbered buttons on the remote control to select a teletext page which has
several page numbers on it (eg the index page).
. Press the OK button.
. Press v or V to select the desired page number then press the OK button. The requested
page is displayed after some seconds.