Quick Setup Guide
Step 2: Connect Antenna or Cable
Step 3: Connect External Devices
Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.
Connecting an AV device (DVD / Blu-ray player, cable/satellite box, etc.)
VHF/UHF Antenna
1
-800-SAMSUNG (1-800-726-7864)
Samsung Electronics America, Inc.
5 Challenger Road Ridgeꢀeld Park, NJ 07660-2112
Best Connection
STOP
Please do not return this unit.
Connect Ant In to
Use one of the connections below to
connect your TV to an external A/V
device.
We recommend using HDMI for the
highest picture quality.
HD connection (up to 1080p)
8
Antenna Cable (Not Supplied)
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
Call Center hours of operation: Mon-Sun, 9:00 AM -12
AM EST.
To register this product, visit: www.samsung.com/
register.
•
•
•
Wall cable jack
If you have problems operating your
TV, call:
VHF/UHF Antenna
Cable or Satellite box
Ant or Cable Out
Using an HDMI Cable
or
1
-800-SAMSUNG (1-800-726-7864)
For web support please visit:
www.samsung.com/support
HDMI Cable (Not Supplied)
HDMI OUT
Use a 75 ohm (round) cable.
DVD / Blu-ray player
HD Cable Box / HD
Satellite receiver (STB)
/
Device
Make sure the AC power cord is plugged in securely to
the wall outlet and the TV.
Very Good Connection
HD connection (up to 1080p)
Step 1: Install the Stand
Step 4: Run Plug & Play
HDMI to DVI Cable (Not Supplied)
Using a HDMI to DVI Cable
Follow the steps below to connect the TV to the stand.
When you turn on your TV for the ꢀrst time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language,
set the clock mode, and launch the TV’s channel memorizing process.
DVI OUT
✎
NOTE
Audio Cable (Not Supplied)
x
Make sure to distinguish between the front and back of the Stand and
Device
AUDIO OUT
Guide Stand when assembling them.
It also displays connection instructions similar to those in this guide.
x
x
Make sure that at least two persons lift and move the LED TV.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow
buttons on your remote. To make a selection, press the ENTERE button.
To skip a screen, press the MENU button. To turn on your TV, press the POWER
button on the remote or on the TV. To run Plug & Play, follow these steps:
Stand the product up and fasten the screws. If you fasten the screws with
the LED TV placed down, it may lean to one side.
Video Cable (Not Supplied)
Video Cable (Not Supplied)
UN19C4000, UN22C4000, UN22C4010
1ꢀ tUhseinlagnygouuargreemfoorttehecoOnntroSlc, rseeelenct
Plug & Play
Select Language of the OSD.
Good Connection
Display (OSD), and then press the
English
Español
Français
Lowest Quality Connection
Component connection (up to 1080p)
ENTERE button.
Menu Language
:
Audio/Video connection (480i only)
Using a Component Cable
2
3
ꢀ
ꢀ
Select Home Use, and then
press the ENTERE button. If
you select Store Demo, the TV
will reset your picture and audio
settings every 30 minutes.
U Move
E
Enter
Audio Cable
Not Supplied)
DVD / Blu-ray player / Cable Box / Satellite receiver / VCR
DVD / Blu-ray player
Using an Audio/Video Cable
(
COMPONENT OUT
AUDIO OUT
DVD / Blu-ray player / Cable Box / Satellite
receiver / VCR
Plug & Play
:
Component Cable
(Not Supplied)
VIDEO OUT
AUDIO OUT
Device
Anrenna Source
Air
1
2
ꢀ
ꢀ
Insert the stand body into the stand
base.
Digital Cable System
Analog Cable System
:
:
Cable
Auto
Select Antenna Source to
memorize. If Antenna Source is
Cable or Auto, you must select
your cable system type. After
Search
Sbocdreyw. the stand base to the stand 3ꢀ Sboliddey.the TV onto the stand
U Move
E Enter
Connecting an audio device (Home Theater, etc.)
Connecting a PC
selecting source, select Search; then press the ENTERE button on your
Connect your TV to your Home Theater or other audio device to enjoy enhanced
Connect your TV to a PC to use it as a Monitor.
remote.
REELLEEAASSE
LOCK
Sound quality.
✎
✎
Most cable systems are Standard (STD) systems, If you are not sure about
what kind of cable system you have, contact your cable company.
Analog Audio connection
HD connection
Using a HDMI to DVI Cable
DVI OUT
Using a Headphone
If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After
Plug & Play is complete, set your TV to Channel 3 or 4, according to the
directions for your cable or satellite box.
headphone
HDMI to DVI Cable
(
Not Supplied)
AUDIO OUT
UN26C4000
4ꢀ mThineuTteVsm. emorizes the available channels. This process can take up to 45
Digital Audio connection
Using an Optical Cable
Audio Cable
(Not Supplied)
Top view
Screws (M4 X L12)
Guide Stand
5ꢀ AAfutetor tihf eyoTuVhhaavsemaedmigoitarizl ecdhatnhneeclhinanynoeulrsa, rcehao.oSseeletchteMCaloncukalMifoydoeu.dSoenle’tc,tor
if you have a cable or satellite box. When done, press the ENTERE button.
Digital Audio System
Optical Cable (Not Supplied)
OPTICAL
s
s
Using a D-Sub Cable
s
s
✎
If you select Manual, the clock setting screen appears.
Audio Cable
(Not Supplied)
1
2
ꢀ
ꢀ
Connect the Guide Stand to the
Stand using four screws (M4 X
L12) as shown
s
Stand
AUDIO OUT
PC OUT
6ꢀ ESNeleTcEtRthEe dbayultigtohnt.savings time setting: Off or On, and then press the
Analog Audio connection
Using an Audio Cable
Rear
With your TV upright, connect the 3
TV to the Stand as shown.
ꢀ
Fasten three screws (M4 X L8) at
position 1, and then fasten three
screws (M4 X L8) at position 2.
7ꢀ Select the time zone in which you live, and then press the ENTERE button.
D-Sub Cable (Not Supplied)
Ampliꢀer / DVD home theater
Audio Cable (Not Supplied)
AUDIO IN
8
ꢀ
After the time zone screen, The connection method for best HD screen
quality is displayed. Press Right arrow button on your remote to view each
screen in succession. Press the Blue button to skip this section.
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link.
s
s
s
Digital Audio connection
Using an Optical Cable
2
s
s
s
s
Front
s
s
s
9ꢀ The Enjoy your TV. screen appears. Then press the ENTERE button.
If You Want to Rerun Plug & Play
EX-LINK: Connector for service only.
Digital Audio System
1
Optical Cable (Not Supplied)
Rear
OPTICAL
1
2
3
.
.
.
Press the SOURCE button on your remote, then select TV mode.
Press the MENU button on your remote to display the menu.
Press the ▲ or ▼ button to select Setup, and then press the ENTERE
button.
4
.
Press ENTERE again to select Plug & Play.
[
QSG]BN68-02628A-01Eng.indd
1
2010-09-03 오후 6:46:05
¿Tienes problemas con un dispositivo? Haz una pregunta - nuestros usuarios pueden ayudarte