Manual de instrucciones Samsung PC540

Si has encontrado esta página, seguramente tienes un problema y necesitas el manual de instrucciones para el dispositivo Samsung PC540. Recuerda comprobar si es el manual exacto para el dispositivo que buscas. En nuestra base Samsung PC540 pertenece a la categoría Televisión plana. El manual Samsung PC540 es del fabricante, la empresa Samsung - es un documento oficial y si tienes alguna duda acerca de su contenido, contacta directamente con el fabricante del dispositivo Samsung PC540. El manual Samsung PC540 se puede ver directamente online o guardar y almacenar en tu ordenador.

Quick Setup Guide  
Connecting an audio device (Home Theater, etc.)  
Step 4: Connect External Devices  
Congratulations on the purchase of your new Samsung TV.  
Read this setup guide to get your TV up and running quickly.  
Connect your TV to your Home Theater or other audio device to enjoy enhanced  
Sound quality.  
Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)  
Analog Audio connection  
-800-SAMSUNG (1-800-726-7864)  
Samsung Electronics America, Inc.  
5 Challenger Road Ridgeꢀeld Park, NJ 07660-2112  
Please do not return this unit.  
Use one of the connections below to connect your TV to an external A/V device. We recommend using HDMI for the highest picture quality.  
Using an Audio Cable  
Samsung Electronics Canada Inc.  
55 Standish Court Mississauga, Ontario L5R 4B2  
Call Center hours of operation: Mon-Sun, 9:00 AM -12  
To register this product, visit:  
HDMI to DVI Cable  
(Not Supplied)  
Audio Cable  
Not Supplied)  
Ampliꢀer / DVD  
home theater  
If you have problems operating your  
TV, call:  
HDMI Cable (Not Supplied)  
-800-SAMSUNG (1-800-726-7864)  
For web support please visit:  
Audio Cable  
(Not Supplied)  
Best Connection  
HD connection (up to 1080p)  
Digital Audio connection  
Using an HDMI Cable  
Using an Optical Cable  
Very Good Connection  
DVD / Blu-ray player / HD Cable  
Box / HD STB (Set-Top-Box)  
satellite receiver  
Digital Audio System  
HD connection (up to 1080p)  
Optical Cable (Not Supplied)  
Step 1: Install the Stand  
Using an HDMI to DVI Cable  
0 inches model only  
Follow the steps below to connect the TV to the stand.  
Connecting a PC  
Video Cable (Not Supplied)  
Make sure to distinguish between the front and back of the Stand and  
Guide Stand when assembling them.  
Connect your TV to a PC to use it as a Monitor.  
HD connection  
Good Connection  
Audio Cable (Not Supplied)  
Using a DVI to HDMI Cable  
Make sure that at least two persons lift and move the PDP TV.  
Component connection (up to 1080p)  
Stand the product up fasten the screws. If you fasten the screws with the  
with the PDD TV placed down, it may lean to one side.  
Using an Audio/Video Cable  
Lowest Quality Connection  
HDMI to DVI Cable (Not Supplied)  
DVD / Blu-ray player / HD Cable Box / HD  
Satellite receiver (STB)  
Audio/Video connection (480i only)  
Top view  
Audio Cable  
(Not Supplied)  
Screws (M4 X L12)  
Using a Component Cable  
Blu-ray player  
Guide Stand  
DVD, Blu-ray player, cable box,  
STB satellite receiver, VCR  
Audio Cable  
(Not Supplied)  
Connect the Guide Stand to the  
Stand using ꢀve screws (M4 X L12)  
as shown.  
Using an D-Sub Cable  
Component Cable  
Not Supplied)  
When connecting to AV IN 1 on the back of your TV, attach the  
video cable (yellow) to the green jack next to the AV IN 1 label.  
The jack will not match the color of the video cable (yellow).  
D-Sub Cable  
(Not Supplied)  
With your TV upright, connect the 3ꢀ Fpaosstiteionntw1o,sacnrdewthse(nMf4asXteLn12th)eat  
TV to the Stand as shown.  
Audio Cable (Not Supplied)  
Changing the Picture Mode  
two screws (M4 X L2) at position  
Step 5: Run Plug & Play  
6ꢀ ESNeleTcEtRthEe dbayultitgohnt savings time setting: Off or On, and then press the  
When you turn on your TV for the ꢀrst time, it automatically launches the Plug &  
Play function. With Plug & Play, you can select the On Screen Display language,  
set the clock mode, and launch the TV’s channel memorizing process.  
It also displays connection instructions similar to those in this guide.  
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow  
buttons on your remote. To make a selection, press the ENTERE button.  
To skip a screen, press the MENU button. To turn on your TV, press the POWER  
Your TV has three preset Picture Modes with factory adjusted settings, each  
designed to give you an excellent picture under speciꢀc conditions.  
To change the Picture mode, press the P.MODE button on your remote. The ꢀrst  
time you press it, your TV displays the current setting. Thereafter, each time you  
press the P.MODE button, you change the mode of the picture on the screen.  
7ꢀ Select the time zone in which you live, and then press ENTERE button.  
8ꢀ qAuftaelritythies tdimispelazyoende.sPcrreesesn,RTighhetcaorrnonwecbtuiotntomn eotnhoyodufrorrebmeostteHtDo vsicerweeenach  
screen in succession. Press the Blue button to skip this section.  
The Picture Modes are listed and described in the table below:  
button on the remote or on the TV. To run Plug & Play, follow these steps:  
Brightens picture. For a vibrant, enhanced image in brightly lit or  
sunny room.  
Step 2: Install the Batteries into the Remote  
9ꢀ The Enjoy your TV. screen appears. Then press the ENTERE button.  
Using your remote control,  
Plug & Play  
To install batteries into your remote  
control, follow these steps:  
For a bright, detailed picture in a normally lit room.  
select the language for the On  
Screen Display (OSD), and then  
press the ENTERE button.  
Select Language of the OSD.  
Changing the Screen Size  
For a studio quality cinema picture in a dimly lit or dark room.  
Lift the cover on the back of the  
remote upward as shown in the ꢀgure  
to the right.  
Menu Language  
Your TV has several screen size options, each designed to work best with speciꢀc  
types of video input. If you have a cable box or satellite receiver, it may have its own  
set of screen sizes as well.  
To change the screen size, press the P.SIZE button on your remote. The ꢀrst time  
you press it, your TV displays the current setting. Thereafter, each time you press  
the P.SIZE button, you change the size of the picture on the screen.  
To change the Picture Mode, follow these steps:  
1. Turn on your TV, press the TOOLS button on your remote.  
The Tools menu appears.  
U Move  
Select Home Use, and then  
Install two AAA batteries.  
press the ENTERE button. If you select Store Demo, the TV will reset your  
Make sure to match the + and - ends of the batteries to the diagram in  
the battery compartment.  
picture and audio settings every 30 minutes.  
2. Using the or on your remote, select Picture mode.  
3. On the Picture mode menu, use the or on your remote to select the  
Picture mode you want.  
Replace the cover.  
Select Antenna Source and Channel Source. If Antenna Source is  
Cable or Auto, you must select Channel Source to same type as your  
cable system type. After selecting source, select Search; then press the  
ENTERE button on your remote.  
The following sizes are available:  
4. Press the EXIT button to exit the menu.  
Step 3: Connect Power and Antenna or Cable  
Setting the Clock  
VHF/UHF Antenna  
Most cable systems are Standard(STD) systems, If you are not sure  
about what kind of cable system you have, contact your cable company.  
16:9 Wide screen  
4:3 Standard screen  
Wide Fit  
Before you can use your TV’s On/Off Timer, you must set the clock. To set the  
clock, follow these steps:  
1. Turn on your TV, press the MENU button on your remote, then select Setup →  
Connect Ant In to  
If your TV is attached to a cable or satellite box, skip Steps 3 through 5.  
After Plug & Play is complete, set your TV to Channel 3 or 4, according  
to the directions for your cable or satellite box.  
Wall cable jack  
VHF/UHF Antenna  
Cable or Satellite box  
Ant or Cable Out  
2. Select Clock Mode, and then press the ENTERE button.  
3. Choose Auto or Manual.  
Use a 75 ohm (round) cable.  
4ꢀ mThineuTteVsm. emorizes the available channels. This process can take up to 45  
Zoom 1  
Zoom 2  
Screen Fit  
If you select Auto, the current time will be set automatically using the time  
Make sure the AC power cord is plugged in securely to  
the wall outlet and the TV.  
Screen Fit Displays the full image without any cut-off when HDMI (720p /  
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.  
from a digital channel.  
After the TV has memorized the channels, choose the Clock Mode. Select  
Auto if you have a digital channel in your area. Select Manual if you don’t, or  
if you have a cable or satellite box. When done, press the ENTERE button.  
If you select Manual, you can set the Month, Day, Year, Hour, Minute  
and am/pm directly by pressing up, down, left and right arrow button on  
your remote.  
If you select Manual, the clock setting screen appears.  
4. Press the RETURN button on your remote when done.  
2010-09-03 오후 6:53:20  

Además del manual Samsung PC540 facilitamos un panel de soporte que te ayudará a solucionar tus problemas con Samsung PC540. Si tienes alguna pregunta, puedes escribirla en el formulario más abajo. Otros usuarios que entran aquí tendrán la oportunidad de ayudarte en la solución de tu problema con Samsung PC540. Recuerda que también puedes compartir tu solución. Si has logrado solucionar el problema, por favor escribe aquí la descripción y la solución del problema con Samsung PC540 - seguro que ayudarás a muchos usuarios.

¿Tienes problemas con un dispositivo? Haz una pregunta - nuestros usuarios pueden ayudarte

Nadie ha añadido un comentario para este dispositivo/manual todavía