Si has encontrado esta página, seguramente tienes un problema y necesitas el manual de instrucciones para el dispositivo Samson UT-5. Recuerda comprobar si es el manual exacto para el dispositivo que buscas. En nuestra base Samson UT-5 pertenece a la categoría Equipo de música estéreo. El manual Samson UT-5 es del fabricante, la empresa Samson - es un documento oficial y si tienes alguna duda acerca de su contenido, contacta directamente con el fabricante del dispositivo Samson UT-5. El manual Samson UT-5 se puede ver directamente online o guardar y almacenar en tu ordenador.

Guide d Tour - UT-5  

1: Power on-off switch* - Use this to turn the UT-5 on or off (to  

conserve battery power, be sure to leave it off when not in use).  

2: Six-pin input connector - Connect your input device (lavalier mic,  

headset mic or instrument cable) here, using the supplied six-pin  

connector. A wiring diagram and chart (showing connections for many  

popular lavalier and headset mics) is presented on pages 25 - 27.  

3: Battery LED - This LED is an indicator of battery strength. If the  

battery is sufficiently strong, when the UT-5 is first powered on, this LED  

will light for about two-tenths of a second and then go off.** When bat-  

tery voltage is low, this LED lights steadily, indicating that the battery  

needs to be replaced.  

4: Audio on-off switch - When set to the “on” position, audio signal is  

transmitted. When set to the “off” position, the audio signal is muted.  

Because the carrier signal remains during muting, no “pop” or “thud” will  

be heard. Note that turning this off does not turn off the transmitter  

power—it is simply a way to temporarily mute the transmission of audio  

signal. If you don’t plan on using the transmitter for extended periods,  

turn off the transmitter power by using the power on-off switch (see #1  

above). As described on page 20 of this manual, setting the UT-5 Audio  

switch to the “on” position operates a tone squelch feature by causing  

a 38.4 kHz signal to be added to the carrier. The illuminated word  

“MUTE” in the UR-5 and UR-5D display is a visual representation of the  

absence of this 38.4 kHz signal. When “MUTE” is lit, either the transmit-  

ter Audio switch is in the “off” position or the currently selected Group  

and Channel do not match that of the transmitter.  

5: Antenna - Connect the supplied transmitter antenna to this mount-  

ing. Replacement antennas are available from Samson Technologies if  

required.  

*

Be sure to mute the audio signal at your external mixer or amplifier  

before turning transmitter power on or off, or an audible pop may result.  

** However, if you turn on the UT-5 within five seconds of turning it off,  

the Battery LED will not light. We recommend that you always leave at  

least five seconds between turning off and turning on the UT-5.  

11  

• ← Previous
• Next page →

Además del manual Samson UT-5 facilitamos un panel de soporte que te ayudará a solucionar tus problemas con Samson UT-5. Si tienes alguna pregunta, puedes escribirla en el formulario más abajo. Otros usuarios que entran aquí tendrán la oportunidad de ayudarte en la solución de tu problema con Samson UT-5. Recuerda que también puedes compartir tu solución. Si has logrado solucionar el problema, por favor escribe aquí la descripción y la solución del problema con Samson UT-5 - seguro que ayudarás a muchos usuarios.