Manuel d'utilisation Sony ICFC1IPMK2

Si vous arrivez à cette page, vous avez probablement un problème, et vous avez besoin de manuel du dispositif Sony ICFC1IPMK2. Soyez sûr de vérifier qu'il s'agit exactement de manuel du dispositif que vous cherchez. Dans notre base de données Sony ICFC1IPMK2 il appartient à la catégorieLecteur MP3. Le manuel d'utilisation Sony ICFC1IPMK2 vient du fabricant, l'entreprise Sony - c'est un document officiel, et si vous avez des doutes quant à son contenu, s'il vous plaît contacter directement le fabricant Sony ICFC1IPMK2. Le manuel Sony ICFC1IPMK2 peut être visualisé directement en ligne, ou enregistré et stocké sur votre ordinateur.

Owner’s Record  
Important Safety Instructions  
3
-873-060-15(1)  
The model number and the serial number are located  
on the rear exterior.  
1) Read these instructions.  
Precautions  
Connecting the antenna  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings.  
Install in accordance with the manufacturer’s  
instructions.  
“Specifications” .  
Operate the unit on the power sources specified in  
Record the serial number in the space provided below.  
Refer to them whenever you call upon your Sony  
dealer regarding this product.  
To connect the AM loop antenna  
The shape and the length of the antenna is designed to  
receive AM signals. Do not dismantle or roll up the  
antenna.  
To disconnect the power cord (mains lead), pull it  
out by the plug, not the cord.  
Model No. ICF-C1iPMK2  
Serial No.  
The unit is not disconnected from the AC power  
source (mains) as long as it is connected to the wall  
outlet, even if the unit itself has been turned off.  
1
2
Remove only the loop part from the plastic  
stand.  
Set up the AM loop antenna.  
Do not leave the unit in a location near a heat  
source, such as a radiator or airduct, or in a place  
subject to direct sunlight, excessive dust, mechanical  
vibration, or shock.  
For customers who purchased this product in the  
USA  
8) Do not install near any heat sources such as  
radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
Please register this product on line at  
http://www.sony.com/productregistration.  
Proper registration will enable us to send you  
periodic mailings about new products, services,  
and other important announcements. Registering  
your product will also allow us to contact you in  
the unlikely event that the product needs  
adjustment or modification. Thank you.  
9
)
Do not defeat the safety purpose of the polarized  
or grounding-type plug. A polarized plug has two  
blades with one wider than the other. A grounding  
type plug has two blades and a third grounding  
prong. The wide blade or the third prong are  
provided for your safety. If the provided plug does  
not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
Allow adequate air circulation to prevent internal  
heat build-up. Do not place the unit on a surface (a  
rug, blanket, etc.) or near materials (a curtain) that  
might block the ventilation holes.  
FM/AM Clock Radio  
ICF-C1iPMK2  
Should any solid object or liquid fall into the unit,  
unplug the unit and have it checked by qualified  
personnel before operating it any further.  
To clean the casing, use a soft cloth dampened with  
a mild detergent solution.  
3
Connect the cords to the AM antenna  
terminals.  
The cords (A and B) can be connected to either  
terminal.  
1
0) Protect the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the  
apparatus.  
Operating Instructions  
WARNING  
To reduce the risk of fire or electric shock, do not  
expose this apparatus to rain or moisture.  
To reduce the risk of electrical shock, do not open  
the cabinet. Refer servicing to qualified  
personnel only.  
NOTES ON LITHIUM BATTERY  
Insert the cord while  
pushing down the  
terminal clamp.  
Wipe the battery with a dry cloth to assure a good  
11) Only use attachments/accessories specified by the  
manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or  
table specified by the manufacturer, or sold with  
the apparatus. When a cart is used, use caution  
when moving the cart/apparatus combination to  
avoid injury from tip-over.  
contact.  
Be sure to observe the correct polarity when  
installing the battery.  
Do not hold the battery with metallic tweezers,  
otherwise a short-circuit may occur.  
To reduce the risk of fire, do not cover the ventilation  
of the apparatus with newspapers, tablecloths,  
curtains, etc. And do not place lighted candles on the  
apparatus.  
The apparatus shall not be exposed to dripping or  
splashing and that no objects filled with liquids, such  
as vases, shall be placed on the apparatus.  
If you have any questions or problems  
concerning your unit, please consult your nearest  
Sony dealer.  
Do not install the appliance in a confined space, such  
as a bookcase or built-in cabinet.  
Specifications  
Time display  
12-hour System  
1
3) Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
4
Make sure the AM loop antenna is  
connected firmly by pulling softly.  
As the main plug is used to disconnect the unit from  
the mains, connect the unit to an easily accessible AC  
outlet. Should you notice an abnormality in the unit,  
disconnect the main plug from the AC outlet  
immediately.  
14) Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has  
been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
Dream Machine is a trademark of Sony Corporation.  
Adjusting the AM loop antenna  
Frequency range  
Find a place and an orientation that provide good  
Band  
FM  
AM  
Frequency  
87.5 – 108 MHz  
530 – 1 710 kHz  
Channel step  
0.1 MHz  
10 KHz  
reception.  
You are cautioned that any changes or  
modifications not expressly approved in this manual  
could void your authority to operate this equipment.  
Do not place the AM loop antenna near the unit or  
other AV equipment, as noise may result.  
If you use an external polarized AM antenna, be sure  
to connect the ground cord to the terminal. The  
supplied AM antenna cord has no polarity.  
No Power No Problem is a trademark of Sony Corporation.  
For the state of california, USA only  
Speaker  
Approx. 5.1 cm (2 inches) dia., 12 Ω  
Perchlorate Material –special handling may apply, See  
www.dtsc.ca.gov/hazardouswaste/perchlorate  
Perchlorate Material: Lithium battery contains  
perchlorate  
Tip  
Power output  
3 W + 3 W (at 10% harmonic distortion)  
Adjust the direction of the AM loop antenna for best  
AM broadcast sound.  
Power requirements  
1
20 V AC, 60 Hz  
Features  
For clock backup: 3 V DC, one CR2032 battery  
©
2008 Sony Corporation Printed in China  
Dual alarm FM/AM Clock radio with iPod dock.  
Various type of alarms- iPod, radio and buzzer.  
Dimensions  
Approx. 300 × 1301× 139 mm (w/h/d)  
16 × 5 × 5 inches) incl. projecting parts  
and controls  
Automatic time set — When you plug the clock in  
for the first time, the current time will be shown in  
the display.  
(11  
1
3
/
1
/8  
/2  
Mass  
Approx. 1.8 kg (3 lb 15.4 oz) incl. CR2032 battery  
This symbol is intended to alert the user  
to the presence of uninsulated “dangerous  
voltage” within the product’s enclosure  
that may be of sufficient magnitude to  
constitute a risk of electric shock to  
persons.  
Automatic Daylight Saving Time/Summer time  
adjustment.  
CLOCK button to display month, day and year.  
Supplied accessories  
Remote commander (1)  
Audio connecting cable (1)  
AM loop antenna (1)  
Brightness control (High/Middle/Low).  
No Power No Problem alarm system to keep the  
clock and the alarm operating during a power  
interruption with a CR2032 battery installed.  
This symbol is intended to alert the user  
to the presence of important operating  
and maintenance (servicing) instructions  
in the literature accompanying the  
appliance.  
Design and specifications are subject to change  
without notice.  
Troubleshooting  
Should any problem occur with the unit, make the  
following simple checks to determine whether or not  
servicing is required.  
Class II equipment symbol This symbol  
indicates that the unit has a double  
insulation system.  
If the problem persists, consult your nearest Sony  
dealer.  
INFORMATION  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful  
The clock displays “AM 12:00” due to a power  
interruption.  
The battery is low. Replace the battery. Remove the  
old battery and install a new one.  
interference in a residential installation. This  
equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there  
is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception,  
which can be determined by turning the equipment  
off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
When daylight saving time begins, the clock does  
not employ the daylight saving time  
automatically.  
Make sure the clock is set correctly.  
Press and hold CLOCK and TIME ZONE/ALARM  
DISPLAY simultaneously for at least two seconds to  
employ the DST function.  
The alarm does not sound at the preset alarm  
time.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment  
and receiver.  
Has the desired alarm been activated? (i.e., Does the  
ALARM A (or B) indicator light up?)  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
The radio or iPod alarm is activated but no sound  
comes on at the preset alarm time.  
Has VOLUME been adjusted?  
Consult the dealer or an experienced radio/TV  
technician for help.  
There is no sound from the iPod.  
Make sure the iPod is securely connected.  
Adjust the VOLUME.  
WARNING  
Danger of explosion if battery is incorrectly  
replaced. Replace only with the same or equivalent  
type.  
The iPod cannot be operated with this unit.  
Make sure the iPod is securely connected.  
Replace the battery for the clock backup with a Sony  
CR2032 lithium battery, and the battery for the  
remote commander with a Sony CR2025 lithium  
battery. Use of another battery may present a risk of  
fire or explosion.  
The iPod cannot be charged.  
Make sure the iPod is securely connected.  
Battery may explode if mistreated. Do not recharge,  
disassemble or dispose of in fire.  
Do not expose the battery to excessive heat such as  
direct sunlight, fire or the like.  
Dispose of used battery promptly. Keep away from  
children.  
This unit includes a preinstalled Sony Lithium battery (CR2032) as back-up power source for the clock, which is preset  
to EST/EDT (Eastern Standard Time/Daylight Time) at the factory. And this battery is considered part of the product.  

En plus du manuel Sony ICFC1IPMK2, nous fournissons également des panneaux d'assistance qui vous aideront à résoudre vos problèmes avec Sony ICFC1IPMK2. Si vous avez des questions, vous pouvez les poser dans le formulaire ci-dessous. Les autres utilisateurs qui viennent ici, auront l'occasion de vous aider à résoudre votre problèmeSony ICFC1IPMK2.

Problème avec le dispositif? Posez une question, nos utilisateurs peuvent aider

Personne n'a ajouté commentaire pour ce dispositif/manuel.