Manuel d'utilisation Quantum Instruments MS3580

Si vous arrivez à cette page, vous avez probablement un problème, et vous avez besoin de manuel du dispositif Quantum Instruments MS3580. Soyez sûr de vérifier qu'il s'agit exactement de manuel du dispositif que vous cherchez. Dans notre base de données Quantum Instruments MS3580 il appartient à la catégorieScanneur. Le manuel d'utilisation Quantum Instruments MS3580 vient du fabricant, l'entreprise Quantum Instruments - c'est un document officiel, et si vous avez des doutes quant à son contenu, s'il vous plaît contacter directement le fabricant Quantum Instruments MS3580. Le manuel Quantum Instruments MS3580 peut être visualisé directement en ligne, ou enregistré et stocké sur votre ordinateur.

INSTALLATION  
Stand-Alone Keyboard  
1. Turn off the host device.  
2. Plug the male 10-pin RJ45 end  
of the PowerLink cable into the  
10-pin socket on the MS3580.  
3
. Connect the other end of the  
PowerLink cable to the keyboard  
port on the host device.  
4
. Plug the external power supply into  
the power jack on the PowerLink  
cable.  
Check the AC input  
requirements of the power  
supply to make sure the  
voltage matches the AC  
outlet. The outlet must be  
located near the equipment  
and be easily accessible.  
5
. Connect AC power to the transformer.  
. Turn on the host device.  
Figure 11.  
6
When the scanner first receives power, the blue LED will turn on; the  
scanner will simultaneously emit a beep and flash the white LED.  
Powering the MS3580 directly from the host device can sometimes  
cause interference with the operation of the scanner or the computer.  
Not all computers supply the same current through the keyboard port.  
For this reason, Metrologic recommends using an external power  
supply. For additional information contact a Metrologic customer  
service representative.  
Caution:  
To maintain compliance with applicable standards, all circuits connected to the scanner  
must meet the requirements for SELV (Safety Extra Low Voltage) according to EN/IEC  
60950.  
To maintain compliance with standard CSA C22.2 No. 60950/UL 60950 and norm  
EN/IEC 60950, the power source should meet applicable performance requirements for  
a limited power source.  
11  

En plus du manuel Quantum Instruments MS3580, nous fournissons également des panneaux d'assistance qui vous aideront à résoudre vos problèmes avec Quantum Instruments MS3580. Si vous avez des questions, vous pouvez les poser dans le formulaire ci-dessous. Les autres utilisateurs qui viennent ici, auront l'occasion de vous aider à résoudre votre problèmeQuantum Instruments MS3580.

Problème avec le dispositif? Posez une question, nos utilisateurs peuvent aider

Personne n'a ajouté commentaire pour ce dispositif/manuel.