Manuel d'utilisation Krell Industries 350Mcx

Si vous arrivez à cette page, vous avez probablement un problème, et vous avez besoin de manuel du dispositif Krell Industries 350Mcx. Soyez sûr de vérifier qu'il s'agit exactement de manuel du dispositif que vous cherchez. Dans notre base de données Krell Industries 350Mcx il appartient à la catégorieAmplificateur stéréo. Le manuel d'utilisation Krell Industries 350Mcx vient du fabricant, l'entreprise Krell Industries - c'est un document officiel, et si vous avez des doutes quant à son contenu, s'il vous plaît contacter directement le fabricant Krell Industries 350Mcx. Le manuel Krell Industries 350Mcx peut être visualisé directement en ligne, ou enregistré et stocké sur votre ordinateur.

Front Panel Description  
The front panel accesses power on/stand-by  
and infrared sensor (remote control) functions.  
The power stand-by, bias, regulator, and Krell  
CAST LEDs, arranged in a triangle on the front  
Note  
An optional remote control is available for Full  
Power Balanced amplifiers.  
panel above the power button, illuminate to indi- FULL POWER BALANCED  
cate amplifier status.  
750Mcx, 450Mcx, AND 350Mcx  
MONAURAL POWER AMPLIFIERS  
FULL POWER BALANCED  
See Figure 2 on page 7  
7
00cx, 400cx, AND 300cx  
STEREO POWER AMPLIFIERS  
7
Power Stand-by LED  
See Figure 1 on page 6  
The blue power stand-by LED (top of LED tri-  
angle) illuminates when the back panel power  
breaker switch has been moved to on, engag-  
ing the input circuitry and placing the amplifier  
in stand-by mode.  
1
Power Stand-by LED  
The blue power stand-by LED (top of LED tri-  
angle) illuminates when the back panel power  
breaker switch has been moved to on, engag-  
ing the input circuitry and placing the amplifier  
in stand-by mode.  
8
Bias LED  
The blue bias LED (lower left of triangle) illumi-  
nates after the front panel power button is  
pressed, indicating that the Sustained Plateau  
Bias III is engaged.  
2
Bias LED  
The blue bias LED (lower left of triangle) illumi-  
nates after the front panel power button is  
pressed, indicating that the Sustained Plateau  
Bias III is engaged.  
9
Power Button  
Use the silver power button to power on the  
amplifier from stand-by mode.  
3
Power Button  
1
The infrared sensor receives the signal from a  
remote control.  
0 Infrared Sensor  
Use the silver power button to power on the  
amplifier from stand-by mode.  
4
Infrared Sensor  
1
1 Krell CAST LED  
The infrared sensor receives the signal from a  
remote control.  
The red Krell CAST LED (center of triangle) illu-  
minates when a Krell CAST input on the back  
panel is connected to another Krell product with  
a Krell CAST output.  
5
Krell CAST LED  
The red Krell CAST LED (center of triangle) illu-  
minates when a Krell CAST input on the back  
panel is connected to another Krell product with  
a Krell CAST output.  
12 Regulator LED  
The blue regulator LED (lower right of triangle)  
illuminates after the front panel power button is  
used to power on from stand-by mode, indicat-  
ing that the regulator is providing power to the  
output stage.  
6
Regulator LED  
The blue regulator LED (lower right of triangle)  
illuminates after the front panel power button is  
used to power on from stand-by mode, indicat-  
ing that the regulator is providing power to the  
output stage.  
8
Krell Full Power Balanced X Series Power Amplifiers  

En plus du manuel Krell Industries 350Mcx, nous fournissons également des panneaux d'assistance qui vous aideront à résoudre vos problèmes avec Krell Industries 350Mcx. Si vous avez des questions, vous pouvez les poser dans le formulaire ci-dessous. Les autres utilisateurs qui viennent ici, auront l'occasion de vous aider à résoudre votre problèmeKrell Industries 350Mcx.

Problème avec le dispositif? Posez une question, nos utilisateurs peuvent aider

Personne n'a ajouté commentaire pour ce dispositif/manuel.