取扱説明書Q-See - Digital Peripheral Solutions Security Camera QT428-833

このページへお越しの方は、おそらくデバイスQ-See - Digital Peripheral Solutions Security Camera QT428-833に関する問題を抱えており、その説明書を必要としていることでしょう。お探しの説明書がお持ちのデバイスのそれであることを必ずご確認ください、お探しのQ-See - Digital Peripheral Solutions Security Camera QT428-833は、このデータベースではカテゴリー防犯カメラに属します。 説明書Q-See - Digital Peripheral Solutions Security Camera QT428-833はメーカーQ-Seeの発行するものです - これは公式文書であるため、その内容に疑問がある場合はデバイスQ-See - Digital Peripheral Solutions Security Camera QT428-833の製造元に直接お問い合わせください。説明書Q-See - Digital Peripheral Solutions Security Camera QT428-833はオンラインで直接見たりコンピュータにダウンロードし保存したりすることができます。

Q-SEE QUICK INSTALLATION GUIDE  
MODEL NUMBER QT428-833  
3. Motion Detection Recording:  
Go to the Main menu, Setup, and click on the Alarm icon (Blue Box in Pic 6.7) and select Motion which will bring up  
the screen shown as Pic 6.8. Go to the Motion options (Blue tab in Pic 6.8). Put a checkmark in the box for the  
cameras that you want to record on motion detection. Next set the holding time (the length of time the file stays open  
after motion stops) for each of the cameras. Then go to the trigger setting and select the cameras that you want to  
record when each camera detects motion. For example, under channel one if you only want channel one to start  
recording when it detects motion then select channel one only. If you also want cameras 2 and 3 to start recording  
when channel 1 detects motion then select channels 1, 2, and 3.  
Pic 6.7  
Pic 6.8  
Next click on the Area setting option to select the area that you want to be sensitive to motion on the camera and the  
level of sensitivity you want for the camera. When you select the setting option it will open the screen shown in Pic  
6.9. If you click on the star icon (Green box in Pic 6.9) the entire area will be sensitive to motion. You can also use the  
mouse to select an area that you want to be sensitive. You can use the slide bar at the bottom of the screen to set the  
level of sensitivity you want, the higher the number, the more sensitive the motion detection. Click on the icon  
showing a silhouette of a person (yellow arrow in Pic 6.9) and an illustration of a walking figure will appear (red arrow  
in Pic 6.9). Drag the walking figure across the blue grid to adjust the sensitivity levels of specific areas that are  
captured in the field of view of your camera. Once you have identified a field of view that suits your needs, click on the  
save icon (red box in Pic 6.9) to save your settings. Repeat this for each camera.  
Pic 6.9  
Next you need to setup the schedule for when you want the cameras to record on motion detection. Click on the  
Schedule tab (Black tab in Pic 6.8) to setup the schedule. You would setup the schedule here the same way you do in  
2
. Time Schedule Recording.  
8
| P a g e  

Q-See - Digital Peripheral Solutions Security Camera QT428-833の説明書の他にも、あなたがQ-See - Digital Peripheral Solutions Security Camera QT428-833とその問題を解決するのに役立つヘルプパネルを提供しています。何か質問がある場合は、以下のフォームから送信することができます。他のユーザーがここを訪問し、あなたのQ-See - Digital Peripheral Solutions Security Camera QT428-833に関する問題解決を支援してくれるかもしれません。また、あなたがたどり着いた解決方法についてもご共有することをお忘れなく。うまく解決できた場合はQ-See - Digital Peripheral Solutions Security Camera QT428-833に関する問題とその解決法についてこちらにご記入ください - きっと数多くのユーザーに役立つことでしょう。

デバイスの問題をお抱えですか?質問しましょう - 他のユーザーが助けてくれることでしょう

このデバイス/説明書のためのコメントはまだ投稿されていません。