VP60-R,
VP161 Series,
SE161-R(6),
FAMT-6
RECESSED VANDAL-PROOF BAFFLES AND
ACCESSORIES FOR 4", 8", AND HORN LOUDSPEAKERS
FEATURES
•
Tamperproof protection for cone loudspeakers and re-entrant horns
•
Special aluminum alloy construction provides twice the strength of
conventional cast aluminum baffles
•
Choice of attractive square or round models meets varying application and
aesthetic requirements
APPLICATIONS
Install ruggedly constructed VP Series baffles in correctional institutions,
detention facilities, and public access areas that may be prone to vandalism
VP60-R
(
schools, community centers, sports/recreation facilities, mass transit terminals).
Models mount cone loudspeakers and/or re-entrant horns as noted.
3
1
2 ⁄
4"
GENERAL DESCRIPTION
(
324mm)
1
1 ⁄
4"
10"
(254mm)
Model VP60-R. Reinforced, protective baffle assembly provides tamperproof
recessed installation of a standard 8" cone loudspeaker or an APF Series
re-entrant horn. Horn installation requires adapter plate Model FAMT-6. Trim
1
(
286mm)
ring is cast from self-aging aluminum alloy with a tensile strength of 44,000
3
P.S.I. and features a ⁄
4
" shielding collar to protect the loudspeaker from bash-
1
⁄
4"
(6mm)
1"
(12mm)
ing. The loudspeaker securely mounts to welded studs behind a perforated
2-gauge CRS plate which is then protected by a stainless steel-woven
2
3
wire-mesh screen positioned ⁄8" in front of the plate for direct impact protec-
tion. The mesh screen is reinforced by a thick bead of sealant on the inside
to protect it against tearing or bending. Rugged unit installs via tamperproof
heat-treated alloy screws (special wrench supplied) to specified enclosures.
Mounting holes are countersunk for added security. Finish is a satin aluminum
with a clear acrylic coating.
Models VP161-R8, VP161-R4. Versatile square baffles offer security for 8" or
4
" cone loudspeakers respectively. Grilles are cast from special self-aging
aluminum alloy with a tensile strength of 44,000 P.S.I. and reinforced with a
perforated 22-gauge CRS stud-mounting loudspeaker plate. Optional adapt-
er plate Model FAMT-6 may be added to Model VP161-R8 to facilitate instal-
lation of re-entrant horn Series APF-15. Units install to specified recessed
or surface enclosures using specially heat-treated alloy screws which are
countersunk for security (special wrench provided). Finish is
textured white epoxy.
VP161 Series
3
⁄
4"
(
19mm)
3
0 ⁄
4"
237mm)
1
(
Model VP161-APF. Unit is designed for recessed installation of APF Series
horns. It shares the features of Model VP161-R8 with provisions to mount a horn
instead of a cone loudspeaker. This offers the economy and convenience of
mounting specified re-entrant horns without an adapter.
BAFFLE SPECIFICATIONS
MOUNTS
LOUDSPEAKER
8" (203mm)
HORN
ADAPTER
FAMT-6*
OUTSIDE
DIMENSIONS
" (324mm) Dia.
MOUNTS
ENCLOSURE** (OR) MTG. RING
(T)95-8 Series, 96-8 Series,
MODEL
VP60-R
WEIGHT
75-8(E1)(E2), 2.8 Lbs. (1.3 kg.)
3
12 ⁄
4
x 1" (25mm) Deep
CS95-8, Q408
76-8
VP161-R4
VP161-R8
4" (102mm)
8" (203mm)
—
FAMT-6*
193-8, 193-8-5
2.6 Lbs. (1.1 kg.)
2.6 Lbs. (1.1 kg.)
2.6 Lbs. (1.1 kg.)
—
SE161-R(6), L20-213***
193-8-5, SE161-R(6)
L20-213***
3
1
0 ⁄4
"
VP161-APF
APF-15
APF-15T, APF-15TU,
APF-15TUC
(237mm) SQ.
" (19mm)
Proj.
3
Included
x ⁄
4
SE161-R6
193-8-6**, L20-213***
*
*
*
Facilitates installation of APF Series horn. Order Seperately.
For specifications on recessed enclosures, please refer to individual specification sheets in Section 3.
For specifications for surface mount enclosure Series SE161.
*
**
Specifications subject to change without notice
1
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
AtlasSound.com
2
17
©
2004 Atlas Sound LP
Printed in U.S.A.
000704
ATS001608 RevC 7/04
SL3-1472
Problemen met het apparaat? Stel een vraag - onze gebruikers kunnen helpen