User manual Delta AP-100

If you found this page, you probably have a problem and you need a user manual for the device Delta AP-100. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Delta AP-100 it belongs to the category Air Cleaner. A user manualDelta AP-100 is taken from the manufacturer, a Delta company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Delta AP-100 directly. You can view the user manualDelta AP-100 directly online or save and store it on your computer.

1.  
All grounded, cord-connected machines:  
In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of  
electric shock. This machine is equipped with an electric cord having an equipment-grounding conductor and a grounding plug.  
The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and  
ordinances.  
Do not modify the plug provided - if it will not fit the outlet, have the proper outlet installed by a qualified electrician.  
Improper connection of the equipment-grounding conduc-tor can result in risk of electric shock. The conductor with insulation  
having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement  
of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.  
Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt a  
s to whether the machine is properly grounded.  
Use only 3-wire extension cords that have 3-prong grounding type plugs and matching 3-conductor receptacles that accept the  
machine’s plug, as shown in Fig. A.  
Repair or replace damaged or worn cord immediately.  
2.  
Grounded, cord-connected machines intended for use on a supply circuit having a nominal rating less than 150 volts:  
If the machine is intended for use on a circuit that has an outlet that looks like the one illustrated in Fig. A, the machine will have  
a grounding plug that looks like the plug illustrated in Fig. A. A temporary adapter, which looks like the adapter illustrated in Fig.  
B, may be used to connect this plug to a matching 2-conductor receptacle as shown in Fig. B if a properly grounded outlet is not  
available. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician.  
The green-colored rigid ear, lug, and the like, extending from the adapter must be connected to a permanent ground such as a  
properly grounded outlet box. Whenever the adapter is used, it must be held in place with a metal screw.  
NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian Electric Code.  
In all cases, make certain that the receptacle in question is properly grounded. If you are not sure, have a  
qualified electrician check the receptacle.  
GROUNDED OUTLET BOX  
GROUNDED OUTLET BOX  
GROUNDING MEANS  
ADAPTER  
CURRENT  
CARRYING  
PRONGS  
GROUNDING BLADE  
IS LONGEST OF THE 3 BLADES  
Fig. A  
Fig. B  
EXTENSION CORDS  
MINIMUM GAUGE EXTENSION CORD  
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES  
Use proper extension cords. Make  
Total  
sure your extension cord is in good condition and is a  
Length of  
Ampere  
3
-wire extension cord which has a 3-prong grounding  
Cord in  
Feet  
up to 25  
25-50  
50-100  
100-150  
up to 25  
25-50  
50-100  
100-150  
up to 25  
25-50  
Gauge of Extension  
Cord  
type plug and matching receptacle which will accept  
the machine’s plug. When using an extension cord,  
be sure to use one heavy enough to carry the current  
of the machine. An undersized cord will cause a  
drop in line voltage, resulting in loss of power and  
overheating. Fig. D-1 shows the correct gauge to use  
depending on the cord length. If in doubt, use the  
next heavier gauge. The smaller the gauge number,  
the heavier the cord.  
Rating  
0-6  
Volts  
120  
120  
120  
120  
120  
120  
120  
120  
120  
120  
120  
120  
120  
120  
120  
18 AWG  
16 AWG  
16 AWG  
14 AWG  
18 AWG  
16 AWG  
14 AWG  
12 AWG  
16 AWG  
16 AWG  
14 AWG  
12 AWG  
14 AWG  
12 AWG  
0-6  
0-6  
0-6  
6-10  
6-10  
6-10  
6-10  
10-12  
10-12  
10-12  
10-12  
12-16  
12-16  
12-16  
50-100  
100-150  
up to 25  
25-50  
GREATER THAN 50 FEET NOT RECOMMENDED  
Fig. D-1  
6

In addition to the user manual Delta AP-100, we also provide a support panel to help you solve your problems with Delta AP-100. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Delta AP-100. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Delta AP-100 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.