User manual Philips 240S1

If you found this page, you probably have a problem and you need a user manual for the device Philips 240S1. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Philips 240S1 it belongs to the category Computer Monitor. A user manualPhilips 240S1 is taken from the manufacturer, a Philips company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Philips 240S1 directly. You can view the user manualPhilips 240S1 directly online or save and store it on your computer.

Troubleshooting  
Troubleshooting  
Safety and  
Troubleshooting  
FAQs  
This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these  
solutions, contact Philips customer service representative.  
Common Problems  
Imaging Problems  
Common Problems  
Regulatory Information  
Having this problem  
Check these items  
Make sure the power cord is plugged into the power outlet  
and into the back of the monitor.  
First, ensure that the power button on the front of the monitor  
No Picture  
(Power LED not lit)  
is in the OFF position, then press it to the ON position.  
Make sure the computer is turned on.  
Make sure the signal cable is properly connected to your  
computer.  
No Picture  
Power LED is white blinking)  
make sure the monitor cable has no bent pins on the connect  
(
side. If yes, repair or replace the cable.  
The Energy Saving feature may be activated  
Screen says  
Make sure the monitor cable is properly connected to your  
computer. (Also refer to the Quick Set-Up Guide).  
Check to see if the monitor cable has bent pins.  
Make sure the computer is turned on.  
The auto function is applicable only in VGA-Analog mode. If  
the result is not satisfactory, you can do manual adjustments  
via the OSD menu. Note that the Auto Function is not  
applicable in DVI-Digital mode as it is not necessary.  
AUTO button doesn't function in VGA  
mode  
Imaging Problems  
Press the Auto button.  
Adjust the image position using the Phase/Clock of Setup in  
Image is not centered  
OSD Main Controls.  
file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/240S1-240S1-plus/240...5B.0V701.001/CD-Contents/lcd/manual/ENGLISH/240S1/safety/saf_troub.htm 第 1 頁 / 共 3 [98-06-05 10:43]  

In addition to the user manual Philips 240S1, we also provide a support panel to help you solve your problems with Philips 240S1. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Philips 240S1. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Philips 240S1 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.