User manual Sony Cyber-shot DSC-R1

If you found this page, you probably have a problem and you need a user manual for the device Sony Cyber-shot DSC-R1. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Sony Cyber-shot DSC-R1 it belongs to the category Digital Camera. A user manualSony Cyber-shot DSC-R1 is taken from the manufacturer, a Sony company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Sony Cyber-shot DSC-R1 directly. You can view the user manualSony Cyber-shot DSC-R1 directly online or save and store it on your computer.

Prepare the battery pack  
Turn the camera on/set the clock  
Insert a recording medium (not  
3
supplied)  
Available recording medium for the camera  
2
-654-464-12 (1)  
1
2
1
Be sure to turn off your camera before charging starts.  
Select  
.
2
Set the POWER switch to ON sliding  
in the arrow direction.  
1
Insert the battery pack.  
Digital Still Camera  
Bottom  
2
Lighting  
(Green)  
1
ON  
POWER  
RReeaadd TThhiiss FFiirrsstt  
2
“Memory Stick”  
“Memory Stick Duo”  
using Memory Stick Duo Adaptor)  
Microdrive/  
CompactFlash  
1
(
Operating Instructions  
You can use a “Memory Stick”, “Memory Stick Duo” (using Memory Stick Duo Adaptor)  
Microdrive, or CompactFlash card (CF card) as a recording medium.  
Before operating the unit, please read this manual and “User’s Guide/Troubleshooting” (separate  
Battery eject lever  
volume) thoroughly, and retain them for future reference.  
3
Set the clock with the multi-selector.  
Open the battery cover  
Firmly insert the battery pack all  
the way while pressing the  
battery eject lever with the tip  
of the battery  
Close the battery cover  
1
2
Select the date display format by moving the multi-  
selector to v/V, then press the center of the multi-selector.  
“Memory Stick”  
Terminal side  
Clock Set  
Y/M/D  
M/D/Y  
D/M/Y  
1
3
To wall outlet  
(wall socket)  
2005  
/
1
/
1
12  
:
00  
AM  
Cancel  
OK  
AC Adaptor  
2
DSC-R1  
Select each item by moving to b/Band set the numeric  
value by moving to v/V, then press the center of the  
multi-selector.  
Open the “Memory Stick”/CF  
card cover.  
Insert the “Memory Stick” all the way in until it clicks.  
Power cord  
(mains lead)  
v
mark  
Microdrive/CompactFlash  
Terminal side  
2
Open the cover, and pull it out. Connect the plug  
to the DC IN jack.  
Clock Set  
Y/M/D  
M/D/Y  
D/M/Y  
2
005  
/
1
/
1
12  
:
00  
AM  
Cancel  
OK  
2
/CHG lamp  
Light on: Charging  
3
Select [OK] by moving to B, then press the center of the  
multi-selector.  
1
Close the “Memory Stick”/CF  
Light off: Completed (Disconnect the AC Adaptor.)  
Insert the Microdrive/CF card all the way in from the connector  
side as shown in the illustration.  
card cover.  
Refer to “User’s Guide/Troubleshooting”  
Clock Set  
(
separate volume)  
Explains advanced techniques and what to do if you experience trouble with  
your camera.  
Y/M/D  
M/D/Y  
D/M/Y  
It takes approximately 180 minutes to charge a completely discharged battery pack using the AC Adaptor at a  
temperature of 25°C (77°F). Charging may take longer under certain circumstances or conditions.  
2
005  
/
1
/
1
10  
:
30  
AM  
Cancel  
OK  
Switching the recording medium  
The lamp also lights up while charging the flash.  
/
CF switch  
:When recording images onto a “Memory Stick” or playing back images  
from “Memory Stick”.  
To cancel, select [Cancel] and press the center of the multi-selector.  
a
Printed on 100% recycled paper using VOC  
CF: When recording images onto a Microdrive/CF card or playing back  
(Volatile Organic Compound)-free vegetable  
images from a Microdrive/CF card.  
©
2005 Sony Corporation Printed in Japan  
oil based ink.  
Using the AC Adaptor  
To change the date and time  
Select [Clock Set] in the (Setup) screen and perform the procedure in step 3above.  
t“User’s Guide/Troubleshooting” (pages 32 and 82)  
Microdrive/CompactFlash  
Use the camera connected to a wall outlet (wall socket) as illustrated above.  
We have checked the compatibility of following Microdrives.  
Hitachi Global Storage Technologies, Inc.  
DSCM-11000 (1 GB)  
Connect the AC Adaptor to an easily accessible wall outlet (wall socket). If any trouble occurs, immediately  
disconnect the plug from the wall outlet (wall socket).  
Checking the accessories supplied  
• After use, disconnect the AC Adaptor both from the camera and from the wall outlet (wall socket).  
On the clock display  
3
K4-2 2GB (HMS 360402D 5CF00)  
AC-L15A AC Adaptor (1)  
• Lens hood (1)  
Shoulder strap (1)  
This set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet  
wall socket) even if the set itself has been turned off.  
Do not use the AC Adaptor placed in a narrow space, such as between  
If you selected [D/M/Y] in step 3-1, set the time on a 24-hour cycle.  
(
3K4-4 4GB (HMS 360404D 5CF00)  
3K6-4 4GB (HMS 360604D 5CF00)  
3K6-6 6GB (HMS 360606D 5CF00)  
Midnight is indicated as 12:00 AM, and noon as 12:00 PM.  
a
wall and furniture.  
When turning on the power  
Unless you set the clock, the Clock Set screen appears each time the camera is turned on.  
• The following screen appears when the camera is turned on for the second time or afterwards.  
To check the remaining battery time  
Set the POWER switch to ON to turn on and check the time on the LCD screen.  
We have checked the compatibility of CF cards compliant with CompactFlash Type I and Type  
II, however, we cannot guarantee proper operation of all CF cards.  
• Copying between media cannot be done with this camera.  
Power cord (mains lead) (1)  
Lens cap (1)  
CD-ROM (Cyber-shot  
application software/Image  
Data Converter SR) (2)  
Remaining indicator  
It takes about one minute until the correct battery remaining  
time appears.  
110min  
10M  
94  
You can insert a “Memory Stick” and a Microdrive/CF card at the same time. However, you cannot record an  
image onto both the media simultaneously.  
Operating instructions:  
110min  
Remaining time  
The displayed time remaining may not be correct under  
certain circumstances.  
Read This First” (this  
• For more information about the “Memory Stick” t“User’s Guide/Troubleshooting” (page 122)  
manual) (1)  
M AF  
Rechargeable battery pack  
NP-FM50 (1)  
• USB cable (1)  
The Microdrive is  
standards. For more information about the Microdrive t“User’s Guide/Troubleshooting” (page 124)  
Before using Microdrive/CF card, be sure to format it using this camera. Otherwise, satisfactory  
performance may not be obtained. t“User’s Guide/Troubleshooting” (page 78)  
a compact and lightweight hard disk drive that complies with CompactFlash Type II  
Operating instructions:  
User’s Guide/  
To turn off the power  
a
Troubleshooting” (1)  
To remove the battery pack  
Set the POWER switch to OFF sliding in the arrow direction.  
Open the cover and slide the battery eject lever in the direction of the arrow. Be careful not to  
drop the battery pack.  
Video cable (1)  
To remove a recording medium  
Open the “Memory Stick”/CF card cover, then push the  
Memory Stick” in once or push the CF card eject lever so  
ON  
POWER  
that the Microdrive/CF card is ejected.  
Notes  
If the camera is running on battery power and you do not operate the camera for certain time, the camera  
turns to Power Save mode (POWER lamp: red) automatically to prevent wearing down the battery pack. To  
change the setting t“User’s Guide/Troubleshooting” (page 72)  
When the access lamp is lit  
Charge the supplied NP-FM50 battery pack before using the camera for the first time.  
Never open the “Memory Stick”/CF card cover or turn off  
the power. The data may be corrupted.  
The LCD screen and the LCD finder are manufactured using extremely high-precision technology so  
over 99.99% of the pixels are operational for effective use. However, there may be some tiny black  
points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD screen.  
These points are normal in the manufacturing process and do not affect the recording in any way.  
Battery eject lever  
CF card eject lever  
Access lamp  
Changing the language setting  
The camera is  
a
precision instrument. Be careful not to bump the lens or the LCD screen, and not to  
You can change the screen display to show messages in a specified language. To change the  
language setting, press MENU to display the menu screen. Select  
apply force to it. Attach the strap to prevent the camera from damage by being dropped, etc. t“User’s  
Guide/Troubleshooting” (page 18)  
To use your camera abroad — Power sources  
(Setup) with the control  
You can use your camera and the AC Adaptor (supplied) in any country or region where the  
power supply is within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug  
adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].  
Do not use an electronic transformer (travel  
button, then, select [ ALanguage] in  
1
(Setup1), and select the desired language. t“User’s  
On carrying or storing  
Guide/Troubleshooting” (page 80)  
Close the LCD screen toward the body.  
Set the zoom fully to the W position to put the lens in.  
Attach the lens cap.  
AC-L15A  
converter), as this may cause a malfunction.  
Additional information on this product and answers to frequently asked questions can be  
found at our Customer Support Website.  
http://www.sony.net/  
continued on the reverse  
2
-654-464-12(1) DSC-R1  

In addition to the user manual Sony Cyber-shot DSC-R1, we also provide a support panel to help you solve your problems with Sony Cyber-shot DSC-R1. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Sony Cyber-shot DSC-R1. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Sony Cyber-shot DSC-R1 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.