CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in a minor or moderate injury.
007 System chart
åLeaking, overheating, or damaged battery could result in ﬁre or injury.
Use battery with the correct speciﬁcation for the camera.
Do not short circuit, heat or dispose of battery in ﬁre.
Do not insert the battery with the polarities reversed.
08 Identiﬁcation of features
Front & Top
åRemove the battery when not planning to use the camera for a
long period of time. Otherwise the battery may leak corrosive
electrolyte and permanently damage the camera’s components.
åDo not ﬁre the ﬂash while it is in contact with hands or objects. Do
not touch the ﬂash after using it continuously. It may cause burns.
åDo not move the camera while it is switched on, if you are using
the AC adapter. After use, always switch off the camera before
unplugging the cable from the wall socket. Then make sure that
any connector cords or cables to other devices are disconnected
before moving the camera. Failure to do so may damage the
cords or cables and cause a ﬁre or electric shock.
åTake care not to touch the lens or lens cover to avoid taking an
unclear image and possibly causing camera malfunction.
åAvoid obstructing the lens or the ﬂash when you capture an image.
åWhen using this camera in low temperatures, you may experience
the following. These are not camera malfunctions and usually
recover at normal temperature.
5 Function button
Camera Status Lamp
012 Connecting to a Power Source
15 Inserting the memory card
16 Instructions on how to use the memory card
18 When using the camera for the ﬁrst time
19 LCD monitor indicator
20 How to use the menu
21 Starting the recording mode
It takes longer to turn on the LCD monitor and the color may
differ from the subject.
When changing the composition, there may be an after image on
the LCD monitor.
How to use the Smart Auto mode
How to use the Program mode
How to use the DUAL IS (Dual Image
åCredit cards may be demagnetized if left near case. Avoid leaving
magnetic strip cards near the case.
åNever connect the 20 pin connector to the USB port of a PC. This
carries a high risk of computer malfunction.
How to use the Scene modes
How to use the Movie clip mode