Quick Setup Guide
Connecting an audio device (Home Theater, etc.)
Step 4: Connect External Devices
Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.
Connect your TV to your Home Theater or other audio device to enjoy enhanced
Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)
Analog Audio connection
Samsung Electronics America, Inc.
5 Challenger Road Ridgeꢀeld Park, NJ 07660-2112
Please do not return this unit.
Use one of the connections below to connect your TV to an external A/V device. We recommend using HDMI for the highest picture quality.
Using an Audio Cable
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
Call Center hours of operation: Mon-Sun, 9:00 AM -12
To register this product, visit: www.samsung.com/
HDMI to DVI Cable
Ampliꢀer / DVD
If you have problems operating your
HDMI Cable (Not Supplied)
For web support please visit:
HD connection (up to 1080p)
Digital Audio connection
Using an HDMI Cable
Very Good Connection
Using an Optical Cable
DVD / Blu-ray player / HD Cable
Box / HD STB (Set-Top-Box)
HD connection (up to 1080p)
Digital Audio System
Optical Cable (Not Supplied)
Step 1: Install the Stand
Using an HDMI to DVI Cable
0 inches model only
Follow the steps below to connect the TV to the stand.
Connecting a PC
Video Cable (Not Supplied)
Connect your TV to a PC to use it as a Monitor.
Make sure to distinguish between the front and back of the Stand and
Guide Stand when assembling them.
Using a DVI to HDMI Cable
Component connection (up to 1080p)
Audio Cable (Not Supplied)
Make sure that at least two persons lift and move the PDP TV.
Stand the product up fasten the screws. If you fasten the screws with the
with the PDP TV placed down, it may lean to one side.
Using an Audio/Video Cable
Lowest Quality Connection
HDMI to DVI Cable (Not Supplied)
DVD / Blu-ray player / HD Cable Box / HD
Satellite receiver (STB)
Audio/Video connection (480i only)
Screws (M4 X L10)
Using a Component Cable
DVD, Blu-ray player, cable box,
STB satellite receiver, VCR
Using an D-Sub Cable
ꢀ Connect the Guide Stand to the
Stand using four screws (M4 X L10)
When connecting to AV IN 1 on the back of your TV, attach the
video cable (yellow) to the green jack next to the AV IN 1 label.
The jack will not match the color of the video cable (yellow).
TWVithtoytohuerSTtVanudp.right, connect the 3ꢀ pFaosstiteionntw1o,sacnrdewthse(nMf4asXteLn12th)eat
Audio Cable (Not Supplied)
Changing the Picture Mode
two screws (M4 X L12) at position
Step 5: Run Plug & Play
6ꢀ ESNeleTcEtRthEe dbayultitgohnt savings time setting: Off or On, and then press the
Your TV has four preset Picture Modes with factory adjusted settings, each
designed to give you an excellent picture under speciꢀc conditions.
To change the Picture mode, press the P.MODE button on your remote. The ꢀrst
time you press it, your TV displays the current setting. Thereafter, each time you
press the P.MODE button, you change the mode of the picture on the screen.
When you turn on your TV for the ꢀrst time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language,
set the clock mode, and launch the TV’s channel memorizing process.
7ꢀ Select the time zone in which you live, and then press ENTERE button.
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow
buttons on your remote. To make a selection, press the ENTERE button.
To skip a screen, press the MENU button. To turn on your TV, press the POWER
8ꢀ qAuftaelritythies tdimispelazyoende.sPcrreesesn,RTighhetcaorrnonwecbtuiotntomn eotnhoyodufrorrebmeostteHtDo vsicerweeenach
screen in succession. Press the Blue button to skip this section.
The Picture Modes are listed and described in the table below:
button on the remote or on the TV. To run Plug & Play, follow these steps:
Brightens picture. For a vibrant, enhanced image in brightly lit or
9ꢀ The Enjoy your TV. screen appears. Then press the ENTERE button.
Step 2: Install the Batteries into the Remote
Plug & Play
Using your remote control,
For a bright, detailed picture in a normally lit room.
To install batteries into your remote
control, follow these steps:
select the language for the On
Screen Display (OSD), and then
press the ENTERE button.
Select Language of the OSD.
Changing the Screen Size
For a studio quality cinema picture in a dimly lit or dark room.
Lift the cover on the back of the
remote upward as shown in the ꢀgure
to the right.
Your TV has several screen size options, each designed to work best with speciꢀc
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the P.SIZE button on your remote. The ꢀrst time
you press it, your TV displays the current setting. Thereafter, each time you press
the P.SIZE button, you change the size of the picture on the screen.
To change the Picture Mode, follow these steps:
1. Turn on your TV, press the TOOLS button on your remote.
The Tools menu appears.
2ꢀ Select Home Use, and then
Install two AAA batteries.
press the ENTERE button. If you select Store Demo, the TV will reset your
picture and audio settings every 30 minutes.
2. Using the ▲ or ▼ on your remote, select Picture mode.
Make sure to match the + and - ends of the batteries to the diagram in
the battery compartment.
3. On the Picture mode menu, use the ◄ or ► on your remote to select the
Picture mode you want.
The following sizes are available:
Select Antenna Source and Channel Source. If Antenna Source is
Cable or Auto, you must select Channel Source to same type as your
cable system type. After selecting source, select Search; then press the
ENTERE button on your remote.
Replace the cover.
4. Press the EXIT button to exit the menu.
Setting the Clock
Step 3: Connect Power and Antenna or Cable
Most cable systems are Standard(STD) systems, If you are not sure
about what kind of cable system you have, contact your cable company.
Before you can use your TV’s On/Off Timer, you must set the clock. To set the
clock, follow these steps:
Turn on your TV, press the MENU button on your remote, then select Setup →
16:9 Wide screen
4:3 Standard screen
Connect Ant In to
If your TV is attached to a cable or satellite box, skip Steps 3 through 5.
After Plug & Play is complete, set your TV to Channel 3 or 4, according
to the directions for your cable or satellite box.
Wall cable jack
Cable or Satellite box
Ant or Cable Out
2. Select Clock Mode, and then press the ENTERE button.
3. Choose Auto or Manual.
The TV memorizes the available channels. This process can take up to 45
Use a 75 ohm (round) cable.
If you select Auto, the current time will be set automatically using the time
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
from a digital channel.
Make sure the AC power cord is plugged in securely to
the wall outlet and the TV.
After the TV has memorized the channels, choose the Clock Mode. Select
Auto if you have a digital channel in your area. Select Manual if you don’t, or
if you have a cable or satellite box. When done, press the ENTERE button.
If you select Manual, you can set the Month, Day, Year, Hour, Minute
and am/pm directly by pressing up, down, left and right arrow button on
If you select Manual, the clock setting screen appears.
4. Press the RETURN button on your remote when done.
2010-09-03 오후 5:42:52