Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
An outdoor aerial / A cable television network / A satellite network
Connecting External A/V Devices
Connect RCA (optional) or S-VIDEO cable (optional) to an appropriate external A/V device such as VCR, DVD or Camcorder.
Connect RCA audio cables (optional) to “L - AUDIO - R” on the rear of your set and the other ends to corresponding audio
out connectors on the A/V device.
Connecting Set-Top Box, VCR or DVD
Connect the VCR or DVD SCART cable (optional) to the SCART connector of the VCR or DVD.
If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD)
and connect the VCR (or DVD) to your set.
Connect the D- Sub cable (optional) to “PC IN” on the rear of your set and the other end to the
Video Card of your computer.
Connect the stereo audio cable (optional) to “PC AUDIO IN” on the rear of your set and the other end to “Audio Out” of the
sound card on your computer.
The Kensington lock (optional) is a device used to physically fix the system when used in a public place.
If you want to use a locking device, contact the dealer where you purchased the TV.
The place of the Kensington Lock may be different depending on its model.
Viewing the Remote Control
Television Standby button
Number buttons for direct
Exit from the teletext display
One/Two-digit channel selection
Teletext sub page
Teletext display/mix both teletext
Temporary sound switch-off
Selects the TV mode directly
Displays the main on-screen menu
Sound effect selection
information and the normal broadcast
Fastext topic selection
: Teletext next page
: Teletext previous page
Teletext mode selection (LIST/FLOF)
: Next channel
: Previous channel
Available source selection
Teletext size selection
Use to see information on the
Exit the on-screen menu
Control the cursor in the menu
Picture effect selection
Sound mode selection
The performance of the remote control may be affected by bright light.
For details, refer to further instructions.