User manual Crimestopper Security Products CS-2012DPII-TW1

If you found this page, you probably have a problem and you need a user manual for the device Crimestopper Security Products CS-2012DPII-TW1. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Crimestopper Security Products CS-2012DPII-TW1 it belongs to the category Automobile Electronics. A user manualCrimestopper Security Products CS-2012DPII-TW1 is taken from the manufacturer, a Crimestopper Security Products company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Crimestopper Security Products CS-2012DPII-TW1 directly. You can view the user manualCrimestopper Security Products CS-2012DPII-TW1 directly online or save and store it on your computer.

REMOTE ENGINE CONTROL  
ENTERING YOUR REMOTE STARTED VEHICLE:  
1) With engine running, Remote Unlock/Disarm system (If armed) or open door with key.  
2) Enter vehicle and be careful not to step on brake pedal! (Remote Start Reset)  
3) Turn Ignition to ON/RUN position, then press brake pedal to reset the Remote Starter & Shift out of park.  
4) Remote starter will reset instantly when the brake is pressed. Parking lights will turn off and the ignition key  
is now controlling your vehicle.  
IDLE DOWN MODE (TAKE-OVER OPERATION)  
This mode allows the unit to take over operation of your idling, parked vehicle while the ignition key is  
removed and you exit the vehicle. The vehicle is put into a remote running condition before you exit and it will  
remain running for the programmed run time, until you return, or until the remote start button is pressed.  
Examples:  
You pull up to a convenience store for a coffee, "Idle Down" mode keeps engine running when you exit the vehicle, (with keys in  
hand) remote lock/arm alarm. When you return, unlock/disarm alarm, turn ignition ON and drive away.  
IDLE DOWN MODE - EXITING THE VEHICLE:  
1
2
3
4
5
6
) With engine running, press and release the Start button. Siren will chirp 3 times for confirmation.  
) Parking Lights will turn ON.  
) Doors will unlock, or if brake pedal is being depressed then doors will unlock when it is released.  
) Turn OFF Ignition and remove key. Engine should remain running.  
) Exit vehicle then remote lock doors if desired.  
) Engine will remain running for programmed run time, until you return, or press the remote start button.  
SOLID  
IGN  
START  
OFF  
UNLOCK  
ENTERING A VEHICLE DURING “IDLE-DOWN” or “INFINITY RUN” MODES:  
See “ENTERING YOUR REMOTE STARTED VEHICLE” section above.  
1
1

In addition to the user manual Crimestopper Security Products CS-2012DPII-TW1, we also provide a support panel to help you solve your problems with Crimestopper Security Products CS-2012DPII-TW1. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Crimestopper Security Products CS-2012DPII-TW1. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Crimestopper Security Products CS-2012DPII-TW1 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.