User manual Crimestopper Security Products CS-2012DPII-TW1

If you found this page, you probably have a problem and you need a user manual for the device Crimestopper Security Products CS-2012DPII-TW1. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Crimestopper Security Products CS-2012DPII-TW1 it belongs to the category Automobile Electronics. A user manualCrimestopper Security Products CS-2012DPII-TW1 is taken from the manufacturer, a Crimestopper Security Products company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Crimestopper Security Products CS-2012DPII-TW1 directly. You can view the user manualCrimestopper Security Products CS-2012DPII-TW1 directly online or save and store it on your computer.

2
-WAY LED PAGING REMOTE  
PAGER / REMOTE TRANSCEIVER:  
The hand-held remote transceiver is used to send and receive information from  
the vehicle. The Control Module transmits confirmation signals from the vehicle to  
your pager. Your range will vary depending on location, terrain, and local RF  
noise/interference. This system is not guaranteed to page you if you are behind  
concrete walls, underground, in a large structure, or in an area with high levels of  
electronic interference. Handle the pager/remote with care. For more on range,  
see “Range Questions” on page 18.  
#
LOCK  
1
#2  
UNLOCK  
#
5
2
nd  
#
4
VEHICLE  
#
TRUNK  
3
ENGINE  
START  
POP  
OPERATION:  
Button  
Functions  
Lock Doors & Arm System  
Button Options  
Press and Hold for  
seconds  
Buttons  
Functions  
Aux#3  
Button Options  
Press Button #1 and #4 at the  
same time  
3
Activate “Panic” feature  
Unlock Doors  
System  
&
Disarm Press twice for second door  
unlock  
Aux #4  
Press Button #3 and #4 at the  
same time.  
Trunk Release (Aux # 1)  
Aux #2  
Press and Release for Aux  
Car Jack  
(See page 14)  
Press and Hold Button #1 and #3  
at the same time for 2 seconds.  
#1  
Press and Hold Button #2  
and #3 at the same time for  
Silent  
Arm/Disarm  
Press Button #2 and #4 at the  
same time.  
3
seconds. (Aux #2)  
Start or Stop engine  
Press and Hold  
seconds  
for  
3
Sensor Disable  
Valet mode  
Press within 3 seconds of arming to disable  
sensor input  
When Disarmed Press and Hold for 3  
seconds to go into Valet mode. Release,  
press and hold again for 3 sec. to enter  
Valet Park.  
2-car operation (Side Button)  
(
2
Change from Car 1 to Car  
)
Press and hold for 5 seconds to switch to vehicle #2.  
Side Button  
Press and release to show the previous status.  
3

In addition to the user manual Crimestopper Security Products CS-2012DPII-TW1, we also provide a support panel to help you solve your problems with Crimestopper Security Products CS-2012DPII-TW1. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Crimestopper Security Products CS-2012DPII-TW1. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Crimestopper Security Products CS-2012DPII-TW1 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.