User manual American Standard Priolo 16-1/2" Height 1.28 GPF Flushometer Toilet 3696.128

If you found this page, you probably have a problem and you need a user manual for the device American Standard Priolo 16-1/2" Height 1.28 GPF Flushometer Toilet 3696.128. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database American Standard Priolo 16-1/2" Height 1.28 GPF Flushometer Toilet 3696.128 it belongs to the category Indoor Furnishings. A user manualAmerican Standard Priolo 16-1/2" Height 1.28 GPF Flushometer Toilet 3696.128 is taken from the manufacturer, a American Standard company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device American Standard Priolo 16-1/2" Height 1.28 GPF Flushometer Toilet 3696.128 directly. You can view the user manualAmerican Standard Priolo 16-1/2" Height 1.28 GPF Flushometer Toilet 3696.128 directly online or save and store it on your computer.

INSTALLATION  
INSTRUCTIONS  
HET High Efficiency  
(1.28gpf/4.8Lpf)  
PRIOLO FLOOR MOUNT BACK OUTLET  
ADA FLUSHOMETER ONE PIECE TOILET  
1
1
.6 GPF Models 3695.016, 3696.016, 3697.016, 3698.016  
.28 GPF Models 3695.128, 3696.128, 3697.128, 3698.128  
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is  
installed properly, please read these instructions carefully before you begin. (Certain installations may require professional  
help.) Also be sure your installation conforms to local codes.  
CAUTION: PRODUCT IS FRAGILE. TWO PEOPLE ARE RECOMMENDED FOR HANDLING  
TO AVOID BREAKAGE AND POSSIBLE INJURY!  
!
NOTE: Pictures may not exactly define contour of china and components.  
NOTE: For proper operation these products require a minimum of 30 psi line pressure.  
RECOMMENDED TOOLS AND MATERIALS  
Putty Knife  
Hacksaw  
Regular Screwdriver  
Wax Ring/Gasket  
Adjustable Wrench  
Sealant  
Closet Bolts  
Tape Measure  
Carpenters Level  
Flexible Supply Tube  
1
REMOVE OLD TOILET  
a. Close flush valve completely.  
b. NOTE: If replacing valve, first shut off main water supply!  
c. Remove old mounting hardware, remove toilet and plug wall waste opening to prevent escaping sewer gases.  
d. Remove closet bolts from flange and clean away old wax, putty, etc. ꢀ base area.  
NOTE: Mounting surface must be clean and perpendicular to the floor before new toilet is installed!  
2
PRIOLO 3695/3696 16-1/2" TOP SPUD  
PRIOLO 3697/3698 16-1/2" BACK SPUD  
1
" N.P.T. OR 1" C.W.T. SUPPLY  
TO FLUSH VALVE  
FINISHED WALL  
(
SUGGESTED)  
FINISHED WALL  
7
29-5/8)  
52mm  
121mm  
(4-3/4)  
(
730mm  
(28-3/4)  
752mm  
(29-5/8)  
1
36mm  
356mm  
(14)  
4
70mm  
(
5-3/8)  
(
18-1/2)  
3
56mm  
(14)  
112mm  
(4-3/8)  
470mm  
(18-1/2)  
1
ꢀ-1/2  
6
0mm  
C/L OF SEAT POST HOLES  
140mm (5-1/2) CENTERS  
SPUD  
(
2-3/8)  
C/L OF SEAT POST HOLES  
140mm (5-1/2) CENTERS  
13mm  
(1/2)  
13mm  
(1/2)  
438mm  
(
17-1/4)  
1
3 x 25mm  
slots  
419mm  
(16-1/2)  
13 x 25mm  
slots  
4
19mm  
(
16-1/2)  
(1/2 x 1")  
(
1/2 x 1")  
217mm  
(8-1/2)  
2
17mm  
(
8-1/2)  
102mm  
1
02mm  
(4)  
(
4)  
1
02mm  
(4)  
102mm  
(4)  
C/L OF  
WASTE  
OUTLET  
C/L OF  
WASTE  
OUTLET  
345mm  
(13-5/8)  
C/L OF 1/2”  
DIA. HOLES  
345mm  
(13-5/8)  
C/L OF 1/2”  
DIA. HOLES  
152mm  
(6)  
FINISHED  
FLOOR  
152mm  
(6)  
FINISHED  
FLOOR  
6
46mm  
240mm  
(9-1/2)  
6
46mm  
2
40mm  
(25-3/8)  
(
25-3/8)  
(
9-1/2)  
DIMENSIONS (Nominal) NOTE: Distance from floor to closet flange centerline (rough-in)  
must be 4" (102 mm) with flange surface flush to 1/16" (1.6mm) max. beyond finished wall.  
CLOSET  
BOLTS  
FLUSH TO  
1/16" (1.6mm)  
EXPOSED  
3
INSTALL CLOSET BOLTS  
4
Install closet bolts in flange channel, turn  
0°, and slide into place 6" (152 mm)  
apart and parallel to floor. (Use putty to  
hold bolts in place if necessary.) Brace  
under flooring as needed and drill two  
mounting pilot holes as shown.  
9
CLOSET  
FLANGE  
102mm  
(
4)  
3
45mm  
SEALANT  
(
13-5/8)  
NEOPRENE  
SEAL  
1
68mm  
INSTALL NEOPRENE OR GRAPHITE FELT SEAL*  
Install seal evenly around waste flange (horn).  
Apply a thin bead of sealant around base flange.  
PILOT  
HOLES  
(
6-5/8)  
*
NOTE: Wax seal not recommended for this application.  
Product names listed herein are trademarks of AS America, Inc.  
© AS America, Inc. 2008  
7
301198-100  

In addition to the user manual American Standard Priolo 16-1/2" Height 1.28 GPF Flushometer Toilet 3696.128, we also provide a support panel to help you solve your problems with American Standard Priolo 16-1/2" Height 1.28 GPF Flushometer Toilet 3696.128. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with American Standard Priolo 16-1/2" Height 1.28 GPF Flushometer Toilet 3696.128. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with American Standard Priolo 16-1/2" Height 1.28 GPF Flushometer Toilet 3696.128 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.