User manual Dell 1525

If you found this page, you probably have a problem and you need a user manual for the device Dell 1525. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Dell 1525 it belongs to the category Laptop. A user manualDell 1525 is taken from the manufacturer, a Dell company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Dell 1525 directly. You can view the user manualDell 1525 directly online or save and store it on your computer.

Back to Contents Page  
Processor Module  
Dell™ꢀInspiron™ꢀ1525/1526ꢀServiceꢀManualꢀ  
Removing the Processor Module  
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.  
1
2
.
.
Follow the instructions in Before You Begin.  
Remove the processor thermal-cooling assembly (see Removing the Processor Thermal-Cooling Assembly).  
NOTICE: To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.  
3
.
To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.  
1
ZIF-socket cam screw 2 ZIF socket  
NOTICE: To ensure maximum cooling for the processor, do not touch the heat transfer areas on the processor thermal-cooling assembly. The oils in  
your skin can reduce the heat transfer capability of the thermal pads.  
NOTICE: When removing the processor module, pull the module straight up. Be careful not to bend the pins on the processor module.  
4
.
Lift the processor module from the ZIF socket.  
Replacing the Processor Module  
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.  
NOTICE: Do not touch the processor die. Press and hold the processor down on the substrate on which the die is mounted while turning the cam screw  
to prevent intermittent contact between the cam screw and processor.  
NOTICE: Ensure that the cam lock is in the fully open position before seating the processor module. Seating the processor module properly in the ZIF  
socket does not require force. A processor module that is not properly seated can result in an intermittent connection or permanent damage to the  
microprocessor and ZIF socket.  
NOTE: If a new processor is installed, you will receive a new thermal-cooling assembly, which will include an affixed thermal pad, or you will receive a  
new thermal pad along with a tech sheet to illustrate proper installation.  
1
.
Align the pin-1 corner of the processor module with the pin-1 corner of the ZIF socket, then insert the processor module.  
NOTE: The pin-1 corner of the processor module has a triangle that aligns with the triangle on the pin-1 corner of the ZIF socket.  

In addition to the user manual Dell 1525, we also provide a support panel to help you solve your problems with Dell 1525. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Dell 1525. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Dell 1525 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.