User manual Dell Laptop N5020

If you found this page, you probably have a problem and you need a user manual for the device Dell Laptop N5020. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Dell Laptop N5020 it belongs to the category Laptop. A user manualDell Laptop N5020 is taken from the manufacturer, a Dell company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Dell Laptop N5020 directly. You can view the user manualDell Laptop N5020 directly online or save and store it on your computer.

Back to Contents Page  
Processor Module  
Dell™ꢀInspiron™ꢀN5020/M5030/N5030ꢀServiceꢀManualꢀ  
ꢀꢀRemoving the Processor Module  
ꢀꢀReplacing the Processor Module  
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best  
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.  
CAUTION: Onlyꢀaꢀcertifiedꢀserviceꢀtechnicianꢀshouldꢀperformꢀrepairsꢀonꢀyourꢀcomputer.ꢀDamageꢀdueꢀtoꢀservicingꢀthatꢀisꢀnotꢀauthorizedꢀbyꢀDell™ꢀ  
is not covered by your warranty.  
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal  
surface (such as a connector on your computer).  
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the  
computer.  
Removing the Processor Module  
1
2
3
4
5
.
.
.
.
.
Follow the instructions in Before You Begin.  
Remove the battery (see Removing the Battery).  
Remove the keyboard (see Removing the Keyboard).  
Remove the palm rest (see Removing the Palm Rest).  
Remove the processor heat sink (see Removing the Processor Heat Sink).  
CAUTION: To prevent intermittent contact between the ZIF-socket cam screw and the processor when removing or replacing the processor, press  
to apply slight pressure to the center of the processor while turning the cam screw.  
CAUTION: To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.  
6
.
To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.  
1
ZIF socket  
2
pin-1 corner  
3
ZIF-socket cam screw  
CAUTION: To ensure maximum cooling for the processor, do not touch the heat transfer areas on the processor thermal-cooling assembly. The  
oils in your skin can reduce the heat transfer capability of the thermal pads.  
CAUTION: When removing the processor module, pull the module straight up. Be careful not to bend the pins on the processor module.  

In addition to the user manual Dell Laptop N5020, we also provide a support panel to help you solve your problems with Dell Laptop N5020. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Dell Laptop N5020. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Dell Laptop N5020 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.