User manual Sony RCD-W3

If you found this page, you probably have a problem and you need a user manual for the device Sony RCD-W3. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Sony RCD-W3 it belongs to the category MP3 Player. A user manualSony RCD-W3 is taken from the manufacturer, a Sony company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Sony RCD-W3 directly. You can view the user manualSony RCD-W3 directly online or save and store it on your computer.

Hookups  
This Recorder Can Use the  
Following Discs  
Connecting the recorder to an  
amplifier  
Connect the amplifier to the ANALOG IN/  
OUT jacks using the audio connecting cords  
This recorder can use three types of discs as  
follows:  
(supplied), making sure to match the color-  
coded cords to the appropriate jacks on the  
components: red (R) to red and white (L) to  
white. Be sure to make connections firmly to  
prevent hum and noise.  
Discs with the logo above (Audio CD) can be played  
by both DECK A (the CD player section) and DECK  
B (the CD-R or CD-RW recording section) of the  
recorder.  
CD  
IN  
RCD-W3  
L
R
ANALOG  
IN  
OUT  
TAPE / MD  
OUT IN  
L
R
L
Discs with the logo above (Audio CD-R) are  
R
recordable only one time. When you finalize (page  
1
9) the disc, you can play it in either DECK A (the  
CD player section) or DECK B (the CD-R or CD-RW  
recording section), and you can play it in any  
conventional CD player, including home, car, and  
portable models (A unfinalized disc can be played  
only in DECK B). When you buy a CD-R disc, please  
note that you must buy an audio CD-R disc. A CD-R  
disc designed for computer use will not work in the  
recorder.  
l: Signal flow  
Connecting the recorder to a digital  
component such as CD player, DAT  
deck, or MD deck  
Connect the component through the DIGITAL  
OPTICAL IN/OUT connectors with two  
optical cables (not supplied).  
When using the optical cables  
Take the caps off the connectors and then insert  
the plugs parallelly until they click into place.  
Discs with the logo above (Audio CD-RW) are  
recordable, and also re-writable. When you finalize  
Be sure not to bend or tic together the optical  
cables.  
(
(
page 19) the disc, you can play it in either DECK A  
the CD player section) or DECK B (the CD-R or  
CD-RW recording section), and CD-RW compatible  
players. They will not play back in most current CD  
players unless the player is CD-RW compatible (A  
unfinalized disc can be played only in DECK B).  
When you buy a CD-RW disc, please note that you  
must buy an audio CD-RW disc. A CD-RW disc  
designed for computer use will not work in the  
recorder.  
RCD-W3  
DIGITAL  
Digital component  
OPTICAL  
DIGITAL  
OPTICAL  
IN  
OUT  
IN  
OUT  
l: Signal flow  
Connecting the AC power cord  
Connect the AC power cord to a wall outlet.  
This logo means that a unit is compatible with Audio  
CD-R discs and Audio CD-RW discs (both Audio  
CD-R discs and Audio CD-RW discs can be used).  
Note  
Do not connect the AC power cord to a switched  
outlet.  
6

In addition to the user manual Sony RCD-W3, we also provide a support panel to help you solve your problems with Sony RCD-W3. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Sony RCD-W3. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Sony RCD-W3 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.