XP AZ 1110/17 31-10-2000 10:13 Pagina
1
black film width 113388 mm
Return your Warranty Registration card today to
ensure you receive all the benefits you’re entitled to.
AZ 1110 - Family CD Radio Cassette Recorder
POWER SUPPLY
CASSETTE RECORDER
•
Once your Philips Magnavox purchase
is registered, you’re eligible to receive all
the privileges of owning a Philips
Magnavox product.
• So complete and return theWarranty
Registration Card enclosed with your
purchase at once.And take advantage
of these important benefits.
BATTERIES (see 1)
AC POWER
CASSETTE PLAYBACK
RECORDING FROM THE RADIO
Whenever convenient, use the power supply if you
want to conserve battery life. Make sure you remove
the power plug from the set and wall outlet before
inserting batteries.
1. Check if the power voltage as shown on the type
plate (on the bottom of the set) corresponds to
your local power voltage. If it does not, consult
your dealer or service organisation.
2.If your set is equipped with a voltage selector,
adjust it so that it matches with the local power
voltage
1. Set the source selector to TAPE.
1. Set the source selector to RADIO.
2. Tune to the desired radio station using the TUNING
knob.
3. Press STOP•OPEN 9 / to open the cassette
holder.
2. Press STOP•OPEN
9 / to open the cassette
holder.
3. Insert
4. Press PLAY
a
recorded cassette.
and playback will start.
AZ 1110 Family CD Radio Cassette Recorder
1
Batteries (optional)
1
.
Open the battery compartment and insert as
shown six batteries, type R20, or D-cells.
Replace the compartment door, making sure the
batteries are firmly and correctly in place.
5. Adjust the sound using the VOLUME, and DBB
controls.
6. For brief interruptions, press PAUSE ;. Press
4. Insert
5. Press RECORD
6. For brief interruptions, press PAUSE ;. To resume
recording, press PAUSE again.
7. To stop, press STOP•OPEN /.
a
blank cassette.
0
to start recording.
Warranty
Owner
Model
2
.
3. Connect the power cord to the AC MAINS outlet
and the wall outlet.
RVeegisrteirfiincgayotuiropnroduct Confirmation RReetugrniinsgtyroaurtWioarnranty
PAUSE
7. By pressing
;
again to resume playback.
or 6, fast winding of the tape is
;
Your completed Warranty
3. Remove the batteries if exhausted or if they will
not be used again for long period.
–
The set is now ready to use.
5
9
within 10 days confirms
your right to maximum
protection under the
terms and conditions of
your Philips Magnavox
warranty.
Registration Card serves
as verification of
Registration Card right
away guarantees you’ll
a
4. To switch off the AC power supply completely, pull
the power plug out of the wall outlet.
– Disconnect the power cord when you change
over to battery supply, or to protect the set
during heavy thunderstorms.
possible in both directions.
8. To stop playback, press STOP•OPEN
9
/.
CD SYNCHRO START RECORDING
1. Set the source selector to CD.
2. Insert CD and if desired, program track numbers.
P
P
O
O
EA•DD
W
W
•E
C
E
IOD
D
R
R
O
O
N
N
ownership in the event of receive all the information
–
The keys are automatically released at the end
of the tape.
D
BO
B
OS
B
T
POWER
O
•T
F
A
P
F
•
R
product theft or loss.
and special offers which
you qualify for as the
owner of your model.
–
The incorrect use of batteries can cause
electrolyte leakage and will corrode the
compartment or cause the batteries to burst.
Therefore:
DYNAMIC
a
O
O
P
P
E
E
N
N
M
M
F
F
W
W
M
-
M
-
-
-
9. Set the source selector to TAPE/POWER OFF
position (with the cassette keys released) to
switch off the set.
3. Press STOP•OPEN 9 / to open the cassette
holder.
MHz 108104100969288FM
00083065053M0W
00083065053M0W
1
1
0
0
–
–
–
Do not mix battery types, e.g. alkaline with zinc
carbonate.
When inserting new batteries, replace all
batteries at the same time.
4. Insert
5. Press RECORD 0
a
blank cassette.
to start recording.
P
P
A
A
U
U
S
S
E
E
S
S
T
O
KHz1600120
KHz1600120
Environmental information
T
O
P
P
•
•
O
O
P
P
E
E
N
N
S
S
E
E
A
A
R
R
C
C
H
H
P
P
L
L
A
A
Y
Y
CASSETTE RECORDING (see 6
/ 7 )
PLAY•PAUSE
R
R
E
E
C
C
O
O
R
R
D
D
All redundant packaging material has been
omitted. We have done our utmost to make
the packaging easily separable into three
mono materials: cardboard (box),
expandable polystyrene (buffer) and
polyethylene (bags, protective foam sheet).
–
Playing of the CD program starts automatically
from the beginning of the program. It is not
necessary to start the CD player separately.
General information on cassette recording
S
S
T
T
O
O
P
P
SHUFFLE
SEARCH
SEARCH
Know these
Remove the batteries if the set is not be used
–
–
Recording is permissible insofar as copyright or
other rights of third parties are not infringed.
This deck is not suited for recording on CHROME
(IEC II) or METAL (IEC IV) type cassettes. For
recording you should use NORMAL type cassettes
(IEC I) on which the tabs have not been broken.
The recording level is set automatically. Altering
the VOLUME control or, DBB switch will not affect 1. Press SEARCH
the recording in progress.
No recording will take place during the first
seconds, when the leader tape passes the recorder
heads.
For Customer Use
for
a
long time.
6. For brief interruptions, press PAUSE ;. To resume
recording, press PAUSE again.
7. To stop recording press STOP•OPEN
M
M
O
O
D
D
E
E
safetysymbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Enter below the Serial No. which is
located on the rear of the cabinet. Retain
this information for future reference.
Note: The battery supply is switched off when the
set is connected to the AC power supply.
;
9 /.
Your set consists of materials which
can be recycled if dissassembled by
specialized company. Please observe
the local regulations regarding the
disposal of packaging materials,
To select and record a particular passage
within a track
Model No. _______________________
Serial No. ________________________
a
–
–
–
∞
or
§
to select
a
passage.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
2. Put the CD player in PAUSE ; position at the
selected passage.
7
exhausted batteries and old equipment.
–
Recording will start from this exact point when
you press RECORD 0.
This “bolt of lightning”
WARNING: TO PREVENT
indicates uninsulated material
within your unit may cause an FIRE OR SHOCK HAZARD, DO
t
electrical shock. For the safety of
NOT EXPOSE THIS EQUIPMENT TO
everyone in your household, please do RAIN OR MOISTURE.
not remove product covering.
To prevent the accidental erasure of a recording,
Both the model and production numbers can be found
on the bottom of the set.
keep the cassette side to be safeguarded in front
of you and break out the left tab. Recording on this
side is no longer possible.
Owner’s Manual
Mode d’emploi
Instructivo de manejo
The “exclamation point” calls
CAUTION: To prevent electric
attention to features for which shock, match wide blade of plug to
s
you should read the enclosed
wide slot, and fully insert.
literature closely to prevent operating
and maintenance problems.
PHILIPS CONSUMER ELECTRONICS COMPANY
A Division of Philips Electronics North America Corporation
Knoxville, Tennessee 37914-1810, U.S.A.
Printed in Hong Kong
TCtext/CvB/747
MAC5097
SAFETY
OPERATION/RADIO
CD PLAYER
MAINTENANCE
1
6
x
D-cells
-
R14
2
FM
3
AM
WARNING
GENERAL OPERATION
CD DISPLAY INDICATION (see 4)
PRECAUTIONS & GENERAL MAINTENANCE
RECORDER MAINTENANCE (see 0)
To ensure good recording and playback quality,
hard, flat surface so that it does clean the indicated parts A,Band after every 50
hours of operation or, on average, once month. Use
cotton bud slightly moistened with alcohol or
çCanada
#
%
$
To reduce the risk of fire or
electric shock, do not expose this
appliance to rain or moisture.
This digital apparatus does not exceed the
Class limits for radio noise emissions
1. To switch on the set, use the source selector
2. Adjust the sound using the VOLUME control and
DBB switch.
3. To switch off the set, set the source selector to
TAPE/OFF position, with the cassette keys
released.
–
Total track number: in stop position.
Current track number: during CD play.
Current track number flashes: in PAUSE mode.
SHUFFLE/REPEAT mode: the respective mode is
activated.
(see 8
/
9)
a
–
–
–
–
Place the set on
not tilt.
a
DY
D
BO
A
B
OS
I
B
T
POWER
O
•T
AP
•
R
E
W
D
ON
OPEN
A
M
M
-
DY
N
D
BO
A
B
O
S
B
T
POWER
O
•T
AP
•
R
E
W
D
ON
OPEN
A
M
M
-
B
C
P
L
A
Y
•
P
A
U
S
E
S
P
T
O
U
P
S
E
S
T
O
P
•
O
P
E
N
SHUFFLE
S
E
A
R
C
H
P
L
A
Y
R
E
C
O
R
D
M
H
z
1
0
8
1
0
K
4
1
H
0
z
1
6
0
6
0
2
0
0
F
0
8
3
0
5
0
3
A
0
M
P
L
A
Y
•
P
A
U
S
E
S
P
T
A
O
U
S
E
S
T
O
P
•
O
PE
N
S
E
A
RC
H
P
L
A
Y
R
E
C
O
R
D
M
H
z
1
0
8
1
0
K
4
1
H
0
z
1
60
6
0
2
0
0
F
0
8
3
0
5
0
3
A
0
M
from digital apparatus as set out in the Ra-
dio Interference Regulations of the Cana-
dian Department of Communications.
a
a
a
P
MODE
MO
S
D
E
E
–
Do not expose the set, CDs, batteries or cassettes
to humidity, rain, sand, direct sunlight or other
places where high temperatures can occur, such as
in the vicinity of heating apparatus or in motor
cars parked in the sun.
special head cleaning fluid.
CAUTION
–
–
–
PROGRAM: program function is active,
appears briefly when you store track.
No: error in CD operation or with the CD, or no
disc (see Troubleshooting).
F: Program memory full, when you try to store
more then 20 tracks
P
also
•
•
•
Press PLAY 1 and clean the rubber pressure
roller C.
Then press PAUSE ; and clean the capstan Band
the heads A.
Use of controls or adjustments or
performance of procedures other
than herein may result in hazard-
ous radiation exposure.
a
RADIO (see 2
/
3)
4
1. Set the source selector to RADIO.
2. Adjust the sound using the VOLUME control and
the DBB switch.
3. Select the wave band using the FM-AM band
selector.
–
Do not cover the set. The amplifier produces heat
which must dissipate freely, so make sure that
there is sufficient ventilation around the set.
RAELPLEAT
4
After cleaning, press STOP•OPEN
can also be done by playing
cleaning cassette through once.
9 /.
REPEAT
ALL
SHUFFLE
REPEAT
x
3
Cleaning of the heads
a
A
The set complies with the FCC-Rules, Part 15
and with 21 CFR 1040.10
A
minimum gap of 15 cm is necessary.
RAELPLEAT
x
2
PLAYING A CD
–
–
The mechanical parts of the CD player and the
cassette deck contain self-lubricating bearings and
must not be oiled or lubricated.
PROGRAM
SHUFFLE
4. Tune to
a
radio station using the TUNING knob.
1. Set the source selector to CD.
2. To open the CD compartment, press OPEN on the
the CD door.
3. Insert the audio CD, printed side facing up.
4. To close the CD compartment, push the door down.
SAFETY INSTRUCTIONS
–
Read before operating equipment
11. Grounding or
–
For FM, pull out the telescopic antenna. To
improve FM-reception, incline and turn the
antenna. Reduce its length if the FM-signal is
x
1
A chamois leather slightly moistened with water is
This product was designed and manufactured to meet
sufficient for cleaning the housing. Do not use
cleaning agents containing alcohol, spirits,
ammonia or abrasives as these may harm the
housing.
strict quality and safety standards.There are, however, some
installation and operation precautions which you should be
particularly aware of.
Polarization
-
Precautions
too strong (very close to
a
transmitter).
6
7
that should be taken so that
the grounding or
–
For AM, the set is provided with
a
built-in
–
The CD player scans the contents of the CD and
the total number of tracks is displayed
AC
Polarized
Plug
polarization means of an
appliance is not defeated.
antenna, so the telescopic antenna is not
needed. Direct the antenna by turning the
whole set.
5. To switch off the set, set the source selector to
TAPE/ POWER OFF position, with the cassette keys 7. To interrupt playback, press PLAY•PAUSE 2;.
1
.
Read Instructions
-
All the safety and operating
5. Press PLAY•PAUSE 2; to start playback.
6. Adjust the sound using the VOLUME control and
the DBB switch.
instructions should be read before the appliance is CAmaUtchTtheIwOideNbla:deToopf rtehvisepntluegletoctrtihceshwoidcek, slot,
operated.
CD MAINTENANCE
1
DY
B
D
O
B
M
O
I
T
B
POWER
OF
P
F
OW
D
O
R
ON
2. Retain Instructions - The safety and operating
OPEN
M
H
z
1
0
8
1
0
1
0
1
6
2
0
-
0
3
0
M
thenfully insert. Do not use this (polarized) plug
with an extension cord, receptacle or other outlet
unless the blades can be fully inserted to prevent
blade exposure.
–
–
The lens of the CD player should never be touched.
The lens may cloud over if the CD player is moved
from cold to warm surroundings. The CD player
will not start. Give the player some time to
acclimatise.
P
L
A
Y
•
P
A
U
S
E
S
P
T
O
P
SE
S
T
O
P
•
O
PE
N
SEA
R
CH
P
L
A
Y
R
E
CO
R
D
K
H
z
60
0
instructions should be retained for future reference.
!
@
SHUFFLE
SEARCH
3. Heed Warnings - All warnings on the appliance
and in the operating instructions should be adhered
to.
4. Follow Instructions
instructions should be followed.
MODE
released.
Press PLAY•PAUSE 2; again to continue
playback.
8. Press STOP 9 to stop CD playback.
9. Set the source selector to TAPE/OFF position to
switch off the set.
12. Power-Cord Protection
-
Power supply cords
-
All operating and use
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords
and plugs, convenience receptacles, and the point
where they exit from the appliance.
POWER ON
A•D
9
5. Water and Moisture - The appliance should not
–
–
–
To take a CD out of its box, press the center
1
2
DYBNOAO
D
BB
M
S
T
IC
POWER
O
•T
F
A
P
F
•
R
E
C
IOD
0
9
be used near water
-
for example, near
a
a bathtub,
wet
spindle while lifting the CD. Always pick up the CD
by the edge and replace the CD back in its box
after use to avoid scratching and dust.
washbowl, kitchen sink, laundry tub, in
basement or near swimming pool, etc.
6. Carts and Stands The appliance should be
Note: CD playback will also stop when:
OPEN
AFMM-
-
a
13. Cleaning - The appliance should be cleaned only
as recommended by the manufacturer.
-
–
–
–
the CD has reached the end;
the CD door is opened;
the source selector is in the RADIO or
TAPE/OFF position.
MHz 108104100969288FM
A
M
used only with
by the manufacturer.
An appliance and cart combination
a
cart or stand that is recommended 14. Power Lines
-
An outdoor antenna should be
00083065053
0
located away from power lines.
To clean the CD, wipe in
center towards the edge using a
a straight line from the
soft, lint-free
KHz1600120
1
0
8
7
C
RLAPSRSOD1UCT
6
A.
15. Nonuse Periods - The power cord of the appli-
ance should be unplugged from the outlet when left
unused for a long period of time.
16. Object and Liquid Entry
sinotothtahteoebnjecclotssudroe tnhortofuagllhaonpdelniqinugidss. are not spilled
3
4
P
P
A
A
U
U
S
S
E
E
LASE
should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause the appliance and cart combination
to overturn.
STOP
STOP
•
•
OPEN
OPEN
cloth. Do not use cleaning agents as they may
damage the disc.
Never write on a CD or attach stickers to it.
S
SEEAA
R
RC
C
HH
PPLLAAYY
PLAY•PAUSE
RREECCOORRDD
-
Care should be taken
0
7. Wall or Ceiling Mounting - The appliance
SHUFFLE
should be mounted to
a
wall or ceiling only as
STOP
SEARCH
recommended by the manufacturer.
17. Damage Requiring Service - The appliance
8
.
Ventilation - The appliance should be situated so
that its location or position does not interfere with
its proper ventilation. For example, the appliance
swhhoeunld: be serviced by qualified service personnel
A.The power-supply cord or the plug has been
damaged; or
MODE
should not be situated on
a
bed, sofa, rug, or similar
surface that may block the ventilation openings; or,
B. Objects have fallen, or liquid has spilled into the
appliance; or
placed in
a
built-in installation, such as bookcase
a
C.The appliance has been exposed to rain; or
D. The appliance does not appear to operate
or cabinet that may impede the flow of air through
the ventilation openings.
5
6
A
A
C
normally or exhibits a marked change in
performance; or
9
1
.
Heat - The appliance should be situated away from
heat sources such as radiators, heat registers, stoves,
or other appliances (including amplifiers) that
produce heat.
E. The appliance has been dropped, or the enclosure
damaged.
0. Power Sources - The appliance should be
a power supply only of the type
described in the operating instructions or as
marked on the appliance.
18. Servicing - The user should not attempt to service
the appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
connected to
9
1/8
EL 4562-1
English
Français
Español
LIMITED WARRANTY
CD PLAYER
TROUBLESHOOTING
1
2
3
DBB (Dynamic Bass Boost)
VOLUME
–
–
to increase the bass level
to adjust the volume level
pour amplifier les fréquences basses
pour régler le niveau sonore
Refuerzo dinámico de tonos bajos)
para ajustar el volumen
–
para reforzar los tonos bajos
PHILIPS MAGNAVOX PORTABLE COMPACT DISC
OneYear Free Exchange
This product must be carried in for an exchange.
SEARCH ∞ or
Selecting different track during playback
You can jump to the next track by pressing
SEARCH once. If you want to skip more than
one track, press SEARCH more than once until
§
If
If you are unable to remedy
WARNING: Under no circumstances should you try to repair the set yourself, as this would invalidate the
warranty.
a
fault occurs, first check the points listed below before taking the set for repair.
problem by following these hints, consult your dealer or service center.
a
a
2. To leave the SHUFFLE/REPEAT modes, press the MODE
button repeatedly until the various SHUFFLE/REPEAT
modes are no longer shown on the display. You can also
press STOP 9 to quit playback.
Cassette keys
Touches de la platine cassette
pour interrompre la lecture
pour interrompre la lecture et ouvrir le compartiment
rembobinage rapide de la cassette vers l'avant
rembobinage rapide de la cassette vers l'arrière
pour démarrer la lecture
Teclas del cassette
para interrumpir la reproducción
–
–
PAUSE
;
–
–
–
–
–
–
to interrupt playback
to stop playback and open the cassette compartment
to fast forward the tape
to fast rewind the tape
to start playback
WHO IS COVERED?
EXCHANGING A PRODUCT IN U.S.A.,
§
STOP•OPEN
9
/
à
cassette
para parar la reproducción
y
abrir el compartimiento del cassette
You must have proof of purchase to exchange the
product.A sales receipt or other document showing
that you purchased the product is considered proof of
purchase.Attach it to this owner’s manual and keep
both nearby.
PUERTO RICO OR U.S.VIRGIN ISLANDS...
Contact your dealer to arrange an exchange. Or, ship
the product, insured and freight prepaid, and with proof
of purchase enclosed, to the address listed below.
Small Product Service Center
§
SEARCH
SEARCH
5
6
para avance rápido de la cinta
para avance rápido de la cinta
para iniciar la reproducción
para iniciar la grabación
the display shows the desired track number.
If you want to repeat the running track from the
PROGRAMMING TRACK NUMBERS
PROBLEM
POSSIBLE CAUSE
REMEDY
PLAY
1
beginning, press SEARCH
∞
once. If you want to
You may store at most 20 tracks in the memory in the
desired sequence.
You may store any track more than once.
Set does not react to operation
of any control.
–
–
Electrostatic discharge.
•
•
Switch off the set, disconnect
the power plug and reconnect
after a few seconds.
RECORD
0
to start recording
pour démarrer l'enregistrement
WHAT IS COVERED?
Philips Service Company
907 Snapps Ferry Road, Plant 2, Building
Greeneville,TN 37743
6
repeat one of the previous tracks, press
SEARCH ∞ more than once until the display
shows the desired track number.
4
CD buttons
PLAY•PAUSE 2;
STOP
Touches du lecteur de CD
pour démarrer ou interrompre la lecture du CD
pour interrompre la lecture
pour sauter ou rechercher un passage ou une plage spécifique
pour sélectionner un mode de lecture différent (par ex.: SHUFFLE ou
REPEAT) et pour programmer les numéros de plages
Botones de CD (disco compacto)
para iniciar interrumpir la reproducción del CD
para parar la reproducción
para buscar saltar una parte
para seleccionar un modo de reproducción distinto, por ejemplo,
SHUFFLE (mezcla) REPEAT (repetir) programar números de pista
Warranty coverage begins the day you buy your
product. For one year thereafter, a defective or
(In U.S.A., Puerto Rico and U.S.Virgin Islands, all implied
warranties, including implied warranties of
–
–
–
–
to start or interrupt CD playback
to stop playback
o
inoperative product will be replaced with
a
new,
Display does not function
properly.
Electrostatic discharge.
Switch off the set, disconnect
the power plug and reconnect
9
renewed or comparable product at no charge to you.A
replacement product is covered only for the original
warranty period.When the warranty on the original
product expires, the warranty on the replacement
product also expires.
merchantability and fitness for
a
particular purpose, are
Programming track numbers
limited in duration to the duration of this express
warranty. But, because some states do not allow
limitations on how long an implied warranty may last,
this limitation may not apply to you.)
Starting with
1. In the STOP position you can select
using the SEARCH or button.
Press PLAY•PAUSE 2; to start playback.
a
particular track
1. In the stop position select the desired track using
after a few seconds.
SEARCH
MODE
∞
§
to skip or search
a
passage or
a
track
o
a
o
una pista particular
to select different playback mode e.g. to SHUFFLE or
a
a
desired track
SEARCH
the desired track number.
2. Store the desired track by pressing MODE 6once.
The display shows and PROGAM followed by
your selected track number.
∞
or SEARCH
§
until the display shows
No sound.
–
–
–
–
VOLUME is not adjusted.
Headphones are connected.
Batteries are exhausted.
Batteries are incorrectly
inserted.
•
•
•
•
Adjust the VOLUME.
Disconnect headphones.
Insert new batteries.
REPEAT and to program track numbers
o
y
∞
§
2
.
5
6
7
8
9
0
!
CD display
–
–
to indicate CD functions
indique les fonctions du lecteur de CD
para indicar las funciones de CD
Compartimiento del cassette
para sintonizar emisoras de radio
Puntero del dial de sintonización
WHAT IS EXCLUDED?
Your warranty does not cover:
EXCHANGING A PRODUCT IN CANADA...
Please contact Philips at:
–
P
Cassette compartment
TUNING
Compartiment
à
cassette
labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna systems outside of
the product.
product repair and/or part replacement because of
misuse, accident, unauthorized repair or other cause
not within the control of Philips Consumer
Electronics Company.
Searching for
a
passage within a track
passage within track. The CD
Insert the batteries correctly.
1-800-661-6162 (French Speaking)
to tune to radio stations
pour sélectionner les stations radio
1-800-363-7278 (English Speaking)
You can search for
a
a
3. Select and store all desired tracks of a CD in this
way.
–
Power cord is not securely
connected.
•
Connect the power cord
properly.
Tuning dial pointer
Band selector
OPEN
Indicateur de syntonisation
(In Canada, this warranty is given in lieu of all other
warranties. No other warranties are expressed or
implied, including any implied warranties of
is played at low volume and at high speed, however,
the sound is still recognizable.
–
–
–
to select the wave band (FM-AM)
to open the CD door
pour sélectionner la bande de longueur d'ondes (FM-AM)
pour ouvrir le compartiment du disque
para seleccionar la banda de onda (FM-AM)
para abrir la puerta del CD
1. Keep the SEARCH
∞
or
§
button pressed during
Checking
1. To review the set program, in the stop position
press and hold MODE for more than seconds.
The display will show the track numbers you
have selected in sequence.
a
program
Bad sound.
–
–
Batteries are exhausted.
•
•
Replace batteries.
merchantability or fitness for
a
particular purpose.
playback, and release the button as soon as you
recognize the desired passage:
Philips is not liable under any circumstances for any
direct, indirect, special, incidental or consequential
damages, howsoever incurred, even if notified of the
possibility of such damages.)
Severe radio hum or noise.
Set too close to TV, VCR or
computer.
Increase the distance.
Source selector
POWER ON/OFF switch and to select the sound source:
CD RADIO TAPE
POWER ON/OFF et pour sélectionner la source sonore
TAPE
:
CD-TUNER-
interruptor de POWER ON/OFF (apagado/encendido)
y
selector de la
•
•
reception problems caused by signal conditions or
cable or antenna systems outside the unit.
product that requires modification or adaptation to
2
-
-
fuente de sonido: CD
-
TUNER (sintonización)
-
TAPE (cinta)
a
–
Normal CD playback will resume from this
point.
–
Poor radio reception.
–
Weak radio signal.
•
•
FM: aim and extend the
telescopic antenna for best
reception; (see 2)
AM: rotate the entire set
(see 3).
@
p
–
3.5 mm headphone socket
prise casque 3,5 mm
zócalo de auricular de 3,5 mm
enable it to operate in any country other than the
country for which it was designed, manufactured,
approved and/or authorized, or repair of products
damaged by these modifications.
TO GET OUT-OF-WARRANTY EXCHANGE...
In U.S.A., Puerto Rico or U.S.Virgin Islands, contact
Philips Service Company at (800) 851-8885 to obtain
the cost of out-of-warranty exchange.Then carefully
pack the product and ship it to the Small Product
Service Center (address listed above). In Canada, call the
phone number listed above under “Exchanging a Product
a Canada” to obtain the cost of out-of-warranty
2. To start playback of the program,
press PLAY•PAUSE 2;.
SHUFFLE/REPEAT (see 5)
BACK PANEL
PANNEAU ARRIÈRE
PANEL TRASERO
•
incidental or consequential damages resulting from
the product. (Some states do not allow the exclusion
of incidental or consequential damages, so the above
exclusion may not apply to you.This includes, but is
not limited to, prerecorded material, whether
copyrighted or not copyrighted.)
The MODE button allows you to select four different modes
which can also be combined with PROGRAM. The modes
can be selected or changed during playback and will flash
for 2 seconds before playing your selected mode.
1. During playback only, press MODE until the desired
function appears on the display.
–
Playback starts with the first track of the
program. After the last track, playback stops
and the display shows the CD’s total number of
tracks.
#
$
%
Telescopic antenna
–
–
–
to improve FM reception
for power cord
pour améliorer la réception en modulation de fréquence
prise pour le branchement sur secteur
para mejorar la recepción de FM
enchufe para el cable de la red eléctrica
para abrir el compartimiento de la batería
Poor cassette sound quality.
–
–
Dust and dirt on the heads,
capstan or pressure roller.
Use of incompatible cassette
types (METAL or CHROME).
•
•
Clean the heads etc., see
Maintenance
Only use NORMAL (IEC I) for
recording
AC MAINS
Battery door
to open the battery compartment
compartiment
à
piles
exchange.
•
a
purposes.
product that is used for commercial or institutional
Erasing
You can erase the contents of the memory by;
a
program
REMEMBER...
Recording does not work.
CD playback does not work.
–
–
Cassette tab(s) may be broken
out.
•
•
Apply a piece of adhesive tape
over the missing tab space.
Please record the model and serial numbers found on
the product below.Also, please fill out and mail your
warranty registration card promptly. It will be easier for
us to notify you if necessary.
SHUFFLE
REPEAT ALL, SHUFFLE
tracks in random order.
REPEAT Continuous playback of the current track.
REPEAT ALL Repeats the entire CD.
During playback you can use SEARCH
SEARCH to skip tracks.
-
Tracks are played in random order.
WHERE IS EXCHANGE AVAILABLE?
-
Continuous playback of
–
–
opening the CD door;
setting the source selector to the TAPE or RADIO
You may exchange the product in all countries where
the product is officially distributed by Philips Consumer
Electronics Company. In countries where Philips
Consumer Electronics Company does not distribute the
product, the local Philips service organization will
CD is badly scratched or dirty.
Replace or clean the CD, see
Maintenance.
-
position.
-
–
pressing STOP twice during playback/in the stop
position.
–
–
No CD inserted.
•
•
Insert CD.
MODEL # __________________________________
attempt to provide
a
replacement product (although
–
∞ or
there may be
a
delay if the appropriate product is not
§
readily available).
SERIAL
#
__________________________________
–
Laser lens is steamed up.
•
Wait until lens has
acclimatized.
BEFORE REQUESTING EXCHANGE...
Please check your owner’s manual before requesting an
exchange.Adjustments of the controls discussed there
The CD skips tracks.
–
–
CD is damaged or dirty.
PROGRAM/SHUFFLE is active.
•
•
Replace or clean the CD.
Switch off the PROGRAM/-
SHUFFLE function.
may save you
a
trip.
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.
Philips Service Company, P.O. Box 555, Jefferson City,Tennessee 37760, (423) 475-8869
EL4967E003 / MAC 4108 / 1-97
Have you got problems with your device? Ask a question - our users can help you