User manual Apple CS II

If you found this page, you probably have a problem and you need a user manual for the device Apple CS II. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Apple CS II it belongs to the category Network Card. A user manualApple CS II is taken from the manufacturer, a Apple company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Apple CS II directly. You can view the user manualApple CS II directly online or save and store it on your computer.

About the Apple Ethernet CS II Card  
The Apple Ethernet CS II Card expands the  
communication capabilities of models of Macintosh  
computers that have a communication slot II (CS II).  
The card is designed for networks that conform to the  
IEEE 802.3 standard for Ethernet.  
What’s in the box  
m One Apple Ethernet CS II Card with either a  
twisted-pair connector, a thin coaxial connector  
(with T-connector attached), or an AAUI connector  
Note: Keep the card inside its antistatic bag in  
the protective cardboard box until you’re ready  
to install it.  
m One floppy disk containing Ethernet CS II  
There are three configurations of the Apple Ethernet  
CS II Card, each with a connector for a different type  
of Ethernet cable. These are  
m twisted pair  
m thin coaxial (“coax”)  
m Warranty card  
m User’s guide  
m AAUI (universal connector)  
This manual provides instructions for all three  
configurations of the card.  
IMPORTANT If you purchased a new Macintosh and  
this booklet came in the box, your Apple Ethernet  
CS II Card and software may already be installed,  
and no disk containing the Ethernet CS II software  
is included. Skip ahead to “Installing Your  
Ethernet Software” for information about setting  
up your software.  
You begin by installing the card and then connecting  
it to your network. You should also install the latest  
version of the Ethernet software if a disk is included  
with the card.  
The Apple Ethernet CS II Card requires System  
.5.3 or a later version. For best performance your  
system should have 8 megabytes (MB) minimum of  
random-access memory (RAM).  

In addition to the user manual Apple CS II, we also provide a support panel to help you solve your problems with Apple CS II. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Apple CS II. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Apple CS II - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.