User manual American Standard 730236-100

If you found this page, you probably have a problem and you need a user manual for the device American Standard 730236-100. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database American Standard 730236-100 it belongs to the category Plumbing Product. A user manualAmerican Standard 730236-100 is taken from the manufacturer, a American Standard company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device American Standard 730236-100 directly. You can view the user manualAmerican Standard 730236-100 directly online or save and store it on your computer.

INSTALLATION INSTRUCTIONS  
Countertop Sink  
Introduction: Thank you for selecting our products...products which have been the benchmarks of fine quality for  
years. To help insure that the installation process will proceed smoothly, please read these instructions carefully  
before you begin. Also, review the recommended tools and materials list; carefully unpack and examine your new  
plumbing fixture.  
!
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!  
NOTE: Pictures may not exactly define contour of china and components.  
Recommended Tools & Materials  
Basin Wrench  
Tape  
Measure  
Adjustable Wrench  
Putty Kinfe  
Plumbers' Putty or  
Caulking  
Pipe Wrench  
Hacksaw  
Drill  
Tubing Cutter  
Saber Saw  
Phillips Screwdriver  
Regular Screwdriver  
Channel Lock Pliers  
1
2
3
Mount the faucet and drain assembly (not included)  
on the sink following faucet manufacturer's  
instructions. Be certain to apply a bead of sealing  
putty on the underside of the drain (Part "A") in order  
to ensure a watertight seal between the sink and  
drain. Remove excess putty after installing drain on  
sink.  
Using the template provided,locate the position of  
thesink. Provide proper clearance under the  
countertop for the faucet supply lines, drain assembly  
and the structural parts of the cabinet.  
NOTE: If replacing an existing sink be certain to shut  
off water supply before removing old sink.  
Drill a clearance hole  
inside the perimeter  
line of the template.  
Perimeter  
of template  
A
Perimeter  
of template  
Cut opening around the  
perimeter of the  
template.  
©
American Standard Inc. 2003  
730236-100 Rev. D  

In addition to the user manual American Standard 730236-100, we also provide a support panel to help you solve your problems with American Standard 730236-100. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with American Standard 730236-100. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with American Standard 730236-100 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.