If you found this page, you probably have a problem and you need a user manual for the device Quantum Instruments MS3580. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Quantum Instruments MS3580 it belongs to the category Scanner. A user manualQuantum Instruments MS3580 is taken from the manufacturer, a Quantum Instruments company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Quantum Instruments MS3580 directly. You can view the user manualQuantum Instruments MS3580 directly online or save and store it on your computer.

INSTALLATION  

IBM 46xx or OCIA  

1. Turn off the host device.  

2. Plug the male 10-pin RJ45 end  

of the MVC cable into the  

10-pin socket on the MS3580.  

3. Connect the other end of the MVC  

cable to the host device.  

4. Turn on the host device.  

Figure 9.  

When the scanner first receives power, the blue LED will turn on; the  

scanner will simultaneously emit a beep and flash the white LED.  

Plugging the scanner into the serial port of the PC does not  

guarantee that scanned information will appear at the PC. A software  

driver and correct configuration setting are also required for proper  

communication to occur.  

Caution:  

To maintain compliance with applicable standards, all circuits connected to the scanner  

must meet the requirements for SELV (Safety Extra Low Voltage) according to EN/IEC  

60950.  

To maintain compliance with standard CSA C22.2 No. 60950/UL 60950 and norm  

EN/IEC 60950, the power source should meet applicable performance requirements for  

a limited power source.  

9

• ← Previous
• Next page →

In addition to the user manual Quantum Instruments MS3580, we also provide a support panel to help you solve your problems with Quantum Instruments MS3580. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Quantum Instruments MS3580. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Quantum Instruments MS3580 - you will surely help many users by doing so.