User manual Sanyo VCB-3574IR

If you found this page, you probably have a problem and you need a user manual for the device Sanyo VCB-3574IR. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Sanyo VCB-3574IR it belongs to the category Security Camera. A user manualSanyo VCB-3574IR is taken from the manufacturer, a Sanyo company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Sanyo VCB-3574IR directly. You can view the user manualSanyo VCB-3574IR directly online or save and store it on your computer.

L72H4/US GB 1999, 2, 4  
MOUNTING THE LENS  
Rewiring the lens cable in the lens iris plug  
1
2
1 Prepare the lens cable.  
Cut the cable at the plug, then remove approx. 8 mm of the cable sheath and strip about 2 mm from each wire.  
2
Install the lens iris plug.  
Solder the cable to the pins following the correct pin layout (refer to the table and illustrations), then close  
the plug cover.  
Pin layout  
DC type lenses  
VIDEO type lenses  
+12 V DC (50 mA max.)  
1 Brake coil (–)  
2 Brake coil (+)  
3 Drive coil (+)  
4 Drive coil (–)  
2
4
1
3
2
4
1
3
Not used  
Video output (1.0 Vp-p, high impedance)  
Ground (for video signal and DC power)  
Flange-back adjustment  
If the pick-up surface is not correctly positioned with relation to the lens focal point, the picture will be out of  
focus (in particular when using auto-iris power zoom lenses, sold separately). If that is the case, adjust the  
flange-back position as described below.  
1
1
Using a + screwdriver, loosen the FLANGE BACK LOCK screw (M2:+).  
Set the zoom lens to the maximum telephoto position, set the focus using the focus ring on the lens.  
2
ADJ.  
1 LOCK  
2
3
Set the zoom lens to the maximum wide angle position, set the focus using the FLANGE BACK ADJ. screw.  
Repeat steps 2 and 3, until the image stays in focus when changing from a telephoto shot to a wide angle shot.  
When the setting is complete, tighten the FLANGE BACK LOCK screw.  
3
8
English  

In addition to the user manual Sanyo VCB-3574IR, we also provide a support panel to help you solve your problems with Sanyo VCB-3574IR. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Sanyo VCB-3574IR. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Sanyo VCB-3574IR - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.