User manual Quatech Server ABDG-SE-IN5410

If you found this page, you probably have a problem and you need a user manual for the device Quatech Server ABDG-SE-IN5410. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Quatech Server ABDG-SE-IN5410 it belongs to the category Server. A user manualQuatech Server ABDG-SE-IN5410 is taken from the manufacturer, a Quatech company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Quatech Server ABDG-SE-IN5410 directly. You can view the user manualQuatech Server ABDG-SE-IN5410 directly online or save and store it on your computer.

AirborneDirect™ Serial Device Server Quick Start Guide  
Quatech, Inc.  
Restarts the device. After the device as rebooted it will attempt  
to authenticate to the configured network. As long as the  
network is in range the wireless interface will connect.  
Press Restart [Button]  
If the network is using DHCP then an IP address will be  
assigned to the WLAN interface and IP connectivity is possible  
over the WLAN network.  
If the network is using static IP addresses it will be necessary to  
configure the network interface, see the next step.  
The web interface supports advanced configuration of the device through the additional pages available. The following sections provide  
guidance on how to use these pages for specific configurations.  
Table 2 LED Indicators  
Airborne Device State  
Adapter is not powered.  
Adapter is powered.  
Adapter is not powered.  
Adapter failed Power On Self Test (POST) and is not configured for  
wireless communication.  
Adapter passed POST but is not configured for wireless network  
Adapter passed post and is configured for wireless communication.  
Adapter is not powered.  
that matches device’s configuration.  
Periodic Blinking) Adapter is searching for a valid network (Access Point)  
Adapter has successfully associated with an Access Point.  
If Power LED is also Off then Adapter is not powered.  
If Power LED is On then:  
No TCP session from WLAN or Ethernet interface has been  
A TCP connection to the adapter has been established from the Wireless  
or Ethernet interfaces but no traffic has been detected.  
February 2011  

In addition to the user manual Quatech Server ABDG-SE-IN5410, we also provide a support panel to help you solve your problems with Quatech Server ABDG-SE-IN5410. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Quatech Server ABDG-SE-IN5410. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Quatech Server ABDG-SE-IN5410 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.