HTP-240.fm Page3 Thursday,April7,2005 4:36 PM
8. Damage Requiring Service – Unplug the appli-
ance form the wall outlet and refer servicing to
qualiﬁed service personnel under the following con-
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen
into the appliance,
Mount the speakers as explained in this manual. Don’t
use the front or surround speakers without their bases as
damage or injury may result.
. AC Fuse
The fuse is located inside the chassis and is not userser-
viceable. If power does not come on, contact your Onkyo
authorized service station.
C. If the appliance has been exposed to rain or
D. If the appliance does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualiﬁed technician
to restore the appliance to its normal operation,
E. If the appliance has been dropped or damaged in
any way, and
From time to time you should wipe off the front and rear
panels and the cabinet with a soft cloth. For heavier dirt,
dampen a soft cloth in a weak solution of mild detergent
and water, wring it out dry, and wipe off the dirt. Follow-
ing this, dry immediately with a clean cloth. Do not use
rough material, thinners, alcohol or other chemical sol-
vents or cloths since these may damage the ﬁnish or
remove the panel lettering.
F. When the appliance exhibits a distinct change in
performance – this indicates a need for service.
Use a vacuum cleaner to remove dust from hard-to-reach
9. Replacement Parts – When replacement parts are
required, be sure the service technician has used
replacement parts speciﬁed by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in ﬁre, elec-
tric shock, or other hazards.
BEFORE PLUGGING IN THE UNIT FOR THE
FIRST TIME, READ THE FOLLOWING SECTION
The voltage of the available power supply differs
according to country or region. Be sure that the power
supply voltage of the area where this unit will be used
meets the required voltage (e.g., AC 120 V, 60 Hz) writ-
ten on the rear panel.
0. Safety Check – Upon completion of any service or
repairs to the appliance, ask the service technician to
perform safety checks to determine that the appliance
is in proper operation condition.
1. Wall or Ceiling Mounting – The appliance should
be mounted to a wall or ceiling only as recom-
mended by the manufacturer.
2. Heat – The appliance should be situated away from
heat sources such as radiators, heat registers, stoves,
or other appliances (including ampliﬁers) that pro-
3. Liquid Hazards – The appliance should not be
exposed to dripping or splashing and no objects
ﬁlled with liquids, such as vases should be placed
on the appliance.
For Canadian models
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
Modèle pour les Canadien
Sur les modèles dont la ﬁche est polarisee:
ATTENTION: POUR ÉVITER LES CHOCS ÉLEC-
TRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRE-
SPONDANTE DE LA PRISE ET POUSSER
Have you got problems with your device? Ask a question - our users can help you