User manual QSC Audio I-YM8

If you found this page, you probably have a problem and you need a user manual for the device QSC Audio I-YM8. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database QSC Audio I-YM8 it belongs to the category Speaker. A user manualQSC Audio I-YM8 is taken from the manufacturer, a QSC Audio company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device QSC Audio I-YM8 directly. You can view the user manualQSC Audio I-YM8 directly online or save and store it on your computer.

Optional I-YM8 Accessory Kit  
The I-YM8 Accessory Kit includes a yoke mount bracket, two loud-  
speaker retaining knobs, two swivel feet with retaining knobs,  
mic stand adapter, pole cup and retaining knob.  
The I-YM8 Accessory Kit enables you to mount the loudspeaker to  
most any surface using the yoke mount bracket, or use as a floor  
monitor by attaching the two swivel feet. If wall mounting the  
yoke, we recommend removing the swivel feet. The yoke mount  
bracket may be attached to the pole cup, mic stand adapter, or a  
standard truss clamp.  
EN  
Floor Monitor Use  
Attach the two swivel feet using the retaining knobs provided.  
Use any of the holes along the centerline of the bracket, one  
toward each end. Rotate the feet into place and tighten the knobs  
to prevent rattling. Attach the loudspeaker and secure in place  
with the large retaining knobs.  
Pole Cup Use  
For pole cup use, attach the pole cup to the yoke mount bracket.  
Use the intermediate-sized retaining knob to secure the adapter  
to the yoke using the large hole in the center of the bracket.  
Attach the loudspeaker and secure in place with the large retain-  
ing knobs. Make sure the swivel feet are tight or removed com-  
pletely to prevent rattling.  
IMPORTANT! ENSURE THE LOUDSPEAKER IS  
MOUNTED PROPERLY AND A SAFETY CABLE IS  
INSTALLED TO RETAIN THE LOUDSPEAKER IN THE  
EVENT OF A MOUNTING FAILURE.  
Ensure the mounting surface and supporting struc-  
ture are strong enough to support the loudspeaker  
assembly during any potential vibration or seismic  
activity.  
Attach a safety cable to the attachment point on the  
bottom-back of the loudspeaker. Ensure the safety  
cable, cable attachment technique, securing hard-  
ware, and attachment points are strong enough to  
support several times the weight of the loud-  
speaker in the event of a primary-mount failure.  
6

In addition to the user manual QSC Audio I-YM8, we also provide a support panel to help you solve your problems with QSC Audio I-YM8. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with QSC Audio I-YM8. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with QSC Audio I-YM8 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.